And just another thought.
I found that unless you included [ actually typed ] the file extension
name ( eg *.txt) then my system when within windows is not happy about
it at all.
To check others concerns issue the following from your command client:
$su
Password
#fdisk /dev/hda
Thomas Wilkowski wrote:
The 2.4 kernel should have been automatically
installed when you installed mdk10. If it was not
than, yes you can install it and it will install side
by side. You will also have to edit /etc/lilo.conf.
But before you do please double check /etc/lilo.conf
to see if the
Hi!
I installed the nvidia driver the usual way (logout from x, kill mdkdm, X,
delete x-lock from tmp, install kernel sources, runinstaller, change nv to
nvidia), but upon restarting x, it simply hangs with some blueish lines at
the bottom of the screen. Only reset works, and changing nvidia
Hi!
In 10.0 official, the xmms playlist seems to work seperately from the main
window. When I try to minimize the main window, the playlist simply stays
there. Choosing a k-jofol skin would be ok, but upon restart xmms forgets the
k-jofol setting and shows it's main window
Why?
Tenchi
Hi!
I use a tvtuner card for years with mandrake without any problems. With 10.0
official however, when i start up - or restart - the machine, it simply
forgets that I have a tvtuner. i have to start drakxtv manually each time...
why? How can I make the detection permanent?
Tenchi
Simple test: same movies that in 9.2 played fine and smooth in 10.0 skip
LOTS of frames. I tried with mplayer, xine and totem, always the same
result. Yes, it's an old mobo (AMD K6-2/550), but in 9.2 it did its job.
So I successfully installed the 2.4.25 kernel provided on the 10.0 cd,
but was
Le ven 14/05/2004 à 06:51, g2 a écrit :
I have tried under both jpilot and pilot.
I have received the message:
Warning (gpilotd)
Unknown pilot- no pilots matches ID -1073745932
Use gnomecc to set pilots ID
Whats that? How do I get there?
gnomecc is the Gnome Control Center. It is
On Fri, 2004-05-14 at 00:08, Gert Koefoed Andersen wrote:
Hello.
I have made som 9.2 cds of the 3 iso files and like to know where I find the
number for registering and serfication etc for Mandrakelinux 9.2.
---
Hi Gert,
You get a registration number when you buy Mandrake, not when you
Hi Folks
I've got several mail accounts setup in Kontact but am having a few problems
with collecting email.
I'm on ADSL via a router, so any machine that is on the network is on the
internet. I'm using Mandrake 10 and Kontact for email, news, etc.
Most times whenever I check email I get an
No worries, I've embarressed myself a few times forgetting things were hidden
and wondering why I couldn't find them, so it's something that now comes
easily to mind :-)))
John.
On Fri, 14 May 2004 10:30, g2 wrote:
ah yes, ok, that did the trick. Actually I did not know what the . stood
I am unable to do anything with the floppy drive under 10CE except read it, even as root. If I attempt to copy anything to floppy I get a 'permission denied' message. Anyone have a clue as to how to get it to work
Rich
On Thursday 13 May 2004 05:21 pm, John wrote:
Thanks Tom and Derek for your replies. Haven't been able to
connect to the internet to check mail until today. Had to
borrow a connection. Followed your advice in first email,tom,
and cd works.
Great!
Have to get modem up now. It is a
On Friday 14 May 2004 12:08 am, Marc Lijour wrote:
Le May 12, 2004 05:08 pm, Paul Smith a écrit :
Dear All
Does somebody here know when it is planned to have the iso CDs of MDK 10
Official for free download?
Many thanks,
Paul
Get them at the club ;-)
That's very good advice,
Hi,
I discovered that #mkbootdisk doesn't fit on floppy
no more, because 1.44mb isn't enough space .
How do I make bootimage to usb zip or/and cd-r?
In cd it had to be iso-image doesn't it?
But what about in usb zib, I mean pen drive.
Thank you,
--
best rgds
tt
17:37:38 up 53 min, 0 users,
On Friday 14 May 2004 09:42 am, Thujan wrote:
Hi,
I discovered that #mkbootdisk doesn't fit on floppy
no more, because 1.44mb isn't enough space .
How do I make bootimage to usb zip or/and cd-r?
In cd it had to be iso-image doesn't it?
But what about in usb zib, I mean pen drive.
Thank
I dual boot between Linux and W2k. I store the shared data on a
FAT. Whenever I write to it from Linux it almost always comes up
corrupted.
Is there some special setting I should have in my 'fstab' or
something?
It is so bad that it is basically useless. I don't do
- Original Message -
From: Marc Lijour [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, May 13, 2004 11:15 PM
Subject: Re: [newbie] Why is my FAT always corrupted by Linux?
Le May 13, 2004 05:00 pm, David A. Ferguson a écrit :
I dual boot between Linux and W2k. I store the
From: [EMAIL PROTECTED]
I am unable to do anything with the floppy drive under 10CE except read
it, even as root. If I attempt to copy anything to floppy I get a
'permission denied' message. Anyone have a clue as to how to get it to
work
Rich
Is the disk write
the service Acpi is not present...the system cannot find it...
And now, what can i do?
Best Regards
- Original Message -
From: Mikkel L. Ellertson [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, May 13, 2004 6:37 AM
Subject: Re: R: [newbie] Klaptop doesn't recognize my battery
David A. Ferguson wrote:
- Original Message -
From: Marc Lijour [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, May 13, 2004 11:15 PM
Subject: Re: [newbie] Why is my FAT always corrupted by Linux?
Le May 13, 2004 05:00 pm, David A. Ferguson a écrit :
I dual boot between
Tom Brinkman kirjoitti viestissään (lähetysaika perjantai, 14. toukokuuta 2004
18:36):
On Friday 14 May 2004 09:42 am, Thujan wrote:
Hi,
I discovered that #mkbootdisk doesn't fit on floppy
no more, because 1.44mb isn't enough space .
How do I make bootimage to usb zip or/and cd-r?
In
On Thursday 13 May 2004 15:24, Kaj Haulrich wrote:
On Thursday 13 May 2004 21:14, Ed Chadwick wrote:
Thanks, but I already checked that, and it's set to 5 as it
should be.
Ed.
On Thursday 13 May 2004 15:12, you wrote:
On Thursday 13 May 2004 20:47, Ed Chadwick wrote:
Hello all,
On Fri, 14 May 2004 09:35:36 +0200
Baka Tamás [EMAIL PROTECTED] wrote:
Hi!
In 10.0 official, the xmms playlist seems to work seperately from the
main window. When I try to minimize the main window, the playlist
simply stays there. Choosing a k-jofol skin would be ok, but upon
restart xmms
Woops, wrong list ;-) .. I mean right list for the post .. but I'm using
Gentoo on this system with the problems .. so it seems that MDK and
Gentoo share some resemblance ;-)
On Fri, 14 May 2004 20:03:06 +0200
Ralph Slooten [EMAIL PROTECTED] wrote:
On Fri, 14 May 2004 09:35:36 +0200
Baka
Hi,
I'm new to Linux (Just got my copy of mandrake 10 this morning). I
managed to partition my hard drive and install Mandrake with no problems
(amazing, for a newbie klutz like me).
So far I really like the system - if it wasn't for a few vital programs
that have no Linux equivalent, I
Donato wrote:
the service Acpi is not present...the system cannot find it...
And now, what can i do?
Best Regards
Did you use acpi or Acpi? It makes a difference. Also, check if you
have the directory /proc/acpi because if you don't then it doesn't pay
to go any farther. (Your BIOS
The k-jofol skin didn't help as the next time I restarted, it showed the
original xmms window... :-(
2004. mjus 14. 20.06 dtummal Ralph Slooten ezt rta:
Woops, wrong list ;-) .. I mean right list for the post .. but I'm using
Gentoo on this system with the problems .. so it seems that MDK and
On Friday 14 May 2004 19:54, Ed Chadwick wrote:
On Thursday 13 May 2004 15:24, Kaj Haulrich wrote:
On Thursday 13 May 2004 21:14, Ed Chadwick wrote:
Thanks, but I already checked that, and it's set to 5 as it
should be.
Ed.
On Thursday 13 May 2004 15:12, you wrote:
On
On Thursday 13 May 2004 09:14 pm, Richard McCormick wrote:
Alan Shoemaker wrote:
On Thursday 13 May 2004 05:52 pm, Richard McCormick wrote:
Hi,
I just got Mandrake 10 and boy is it much better, the best yet but there
is one problem and I was wondering if there is a way to configure my
On Fri, 2004-05-14 at 14:11, John wrote:
As a second question, is there any easy way to make the Linux machine
'see' the windows partition on its own hard drive, so as to transfer
files etc.
The following worked for me on ntfs partitions (w2k).
mkdir /mnt/windows
Using your
I'm trying to write a bash script that will recurse through a directory,
find Word files, then run antiword on them. Unfortunately, I'm stuck on
the first stage, which is to get it to recognise a directory. I'd
thought this would work
for i in *
do
if [-d $i]; then
cd $i
and so
On Friday 14 May 2004 04:40 am, Alexandre Aractingi wrote:
Le ven 14/05/2004 à 06:51, g2 a écrit :
I have tried under both jpilot and pilot.
I have received the message:
Warning (gpilotd)
Unknown pilot- no pilots matches ID -1073745932
Use gnomecc to set pilots ID
Whats that? How
On Thu, 13 May 2004 01:06:51 -0400
Marc Lijour [EMAIL PROTECTED] wrote:
My school board is investigating a Citrix + thin-client solution.
Administrative desktop are XP and students win98. They are considering
Linux
Citrix is available for Linux. I was looking at it for testing purposes
in a
Hiya Baka,
But when you loaded it (k-jofol) ... did the playlist also minimilise?
(/me is too lazy this evening to try, hehehe)
On Fri, 14 May 2004 20:34:27 +0200
Baka Tamás [EMAIL PROTECTED] wrote:
The k-jofol skin didn't help as the next time I restarted, it showed
the original xmms
On Sun, 9 May 2004 17:01:37 -0400
Todd Slater [EMAIL PROTECTED] wrote:
alt.binaries.sounds.ogg
alt.binaries.sounds.lossless
But shhh.
Too late; I overheard something.
Todd
--
David E. Fox
lake-wind wrote:
On Friday 14 May 2004 12:08 am, Marc Lijour wrote:
Does somebody here know when it is planned to have the iso CDs of MDK 10
Official for free download?
Get them at the club ;-)
That's very good advice, but for those that don't have the spare cash in their
budget to join the
On Sun, 9 May 2004 09:56:00 -0400
Ronald J. Hall [EMAIL PROTECTED] wrote:
Tom, I've used the XMMS diskwriter route to burning audio CD's here ever since
the first time I saw you post it some time back... :-)
Me too :), and probably longer. I'm very happy with it for two reasons -
one, it's
On Sun, 9 May 2004 14:12:37 -0400
Greg Meyer [EMAIL PROTECTED] wrote:
On Sunday 09 May 2004 01:23 pm, Tom Brinkman wrote:
It's actually much easier to hear with earphones, which is the only way my
wife will let me listen to my music. :-)
Speaking of headphone listening, have you done any
On Fri, May 14, 2004 at 11:18:32PM +0300, robin wrote:
I'm trying to write a bash script that will recurse through a directory,
find Word files, then run antiword on them. Unfortunately, I'm stuck on
the first stage, which is to get it to recognise a directory. I'd
thought this would work
On Fri, May 14, 2004 at 02:01:46PM -0700, David E. Fox wrote:
On Sun, 9 May 2004 14:12:37 -0400
Greg Meyer [EMAIL PROTECTED] wrote:
On Sunday 09 May 2004 01:23 pm, Tom Brinkman wrote:
It's actually much easier to hear with earphones, which is the only way my
wife will let me listen to
On Friday 14 May 2004 02:42 am, Baka Tamás wrote:
Hi!
I use a tvtuner card for years with mandrake without any problems. With
10.0 official however, when i start up - or restart - the machine, it
simply forgets that I have a tvtuner. i have to start drakxtv manually each
time... why? How can
Hi,
I installed a ready compiled kernel..but have nividia card.
Ok, it boots up to a command line login..after some screen on/off's.
Rebooting in original is ok.
Maybe I have to install some drivers on the new kernel..because its working on the old?
Is there a easy way..looking at some
John wrote:
Hi,
I'm new to Linux (Just got my copy of mandrake 10 this morning). I
managed to partition my hard drive and install Mandrake with no
problems (amazing, for a newbie klutz like me).
So far I really like the system - if it wasn't for a few vital
programs that have no Linux
On Fri, 7 May 2004 00:43:35 -0400
JoeHill [EMAIL PROTECTED] wrote:
Anyone got the Linux binary for mp3gain hanging around? The author has
no Linux binaries available on his site now, and I get no response to
e-mails.
Joe, let me know and I'll email the binary to you, if you haven't
already
On Fri, 14 May 2004 16:45:42 -0500
Mikkel L. Ellertson [EMAIL PROTECTED] wrote:
John wrote:
Hi,
I'm new to Linux (Just got my copy of mandrake 10 this morning).
I
managed to partition my hard drive and install Mandrake with no
problems (amazing, for a newbie klutz like me).
I found a solutiona t the forums
in
/etc/modprobe.preload
write bttv
Haven't reload yet hope it will work...
2004. mjus 14. 23.13 dtummal Dennis Myers ezt rta:
On Friday 14 May 2004 02:42 am, Baka Tams wrote:
Hi!
I use a tvtuner card for years with mandrake without any problems. With
Todd Slater wrote:
On Fri, May 14, 2004 at 11:18:32PM +0300, robin wrote:
I'm trying to write a bash script that will recurse through a directory,
find Word files, then run antiword on them. Unfortunately, I'm stuck on
the first stage, which is to get it to recognise a directory. I'd
thought
On Fri, 2004-05-14 at 12:34, David A. Ferguson wrote:
From: [EMAIL PROTECTED]
I am unable to do anything with the floppy drive under 10CE except read
it, even as root. If I attempt to copy anything to floppy I get a
'permission denied' message. Anyone have a clue as to how to
Hello
I have a external usrobotics usb faxmodem that I would like to use on
MD10 official if possible. Harddrake recognizes the modem but lists it
under scanner category. How would I get it setup to use?
Thanks
john
Want to buy your Pack or
Uytkownik Johan napisa:
Hi,
I installed a ready compiled kernel..but have nividia card.
Ok, it boots up to a command line login..after some screen on/off's.
Rebooting in original is ok.
Maybe I have to install some drivers on the new kernel..because its working on the old?
Is there a easy
On Fri, 14 May 2004 14:17:06 -0700
David E. Fox disseminated the following:
Joe, let me know and I'll email the binary to you, if you haven't
already gotten one. I did a quick look for it, it seems that it might
have been originally done for Windows and/or beos, but there was source
patches
51 matches
Mail list logo
