Hi all,
sorry if I bother you with an old topic but so fare I haven't found
anything which really helped me with my problem in the mailing list.
I have an Dell Inspiron 510m with a Pentium M. The PC is fine apart for
the wireless. 10.1 detects my card but apparently I had to download and
install
On Monday 25 October 2004 09:51, Alexander Ruoff wrote:
Hi all,
sorry if I bother you with an old topic but so fare I haven't found
anything which really helped me with my problem in the mailing list.
I have an Dell Inspiron 510m with a Pentium M. The PC is fine apart for
the wireless. 10.1
On Sunday 24 October 2004 23:44, mike wrote:
Steve Chase wrote:
first attempt at linux here, have 10.0 amd64 up and running,have rpms
for video and motherboard on a cd but can not fiigure out how to install
them, even have some rpms (bittorrent) on my desktop but cant figure out
the
On Sunday 24 October 2004 23:44, mike wrote:
Steve Chase wrote:
first attempt at linux here, have 10.0 amd64 up and running,have rpms
for video and motherboard on a cd but can not fiigure out how to install
them, even have some rpms (bittorrent) on my desktop but cant figure out
the
On Monday 25 Oct 2004 10:23, et wrote:
On Sunday 24 October 2004 23:44, mike wrote:
Steve Chase wrote:
first attempt at linux here, have 10.0 amd64 up and running,have rpms
for video and motherboard on a cd but can not fiigure out how to
install them, even have some rpms (bittorrent)
You need to install the wireless-tools package from your CD and then run
through the network connection Wizard in Mandrake Control Centre and
configure it as a wireless connection.
You could also configure it with iwconfig from the command line.
derek
Hi Derek
Well... I did have
On Mon, 25 Oct 2004, Alexander Ruoff wrote:
The problem with ifconfig in the command line is that it doesn't show
eth1. I only get eth1 when I type ifconfig eth1...
ifconfig -a
(shows all interfaces, including those that are down)
--
Stew Benedict
Mandrakesoft
---
[This E-mail scanned
On Monday 25 October 2004 12:38, Alexander Ruoff wrote:
You need to install the wireless-tools package from your CD and then run
through the network connection Wizard in Mandrake Control Centre and
configure it as a wireless connection.
You could also configure it with iwconfig from the
On Monday 25 October 2004 14:05, Derek Jennings wrote:
I am not sure if it is still the case, but the ipw2100 driver used to not
work
with encryption.
derek
I didn't get the ipw2100 driver version 0.54 to work with encryption. 0.54
is the version included with 10.1 CE.
However by uninstalling
On Monday 25 October 2004 12:38, Alexander Ruoff wrote:
But I have a config tool for wireless. When I set up a new network
connection, I have wireless as an option but even though I tried to set
it up that way I always end at the option manual or automatic setup,
no matter which option I choose.
Is anybody here running vmware with the 2.6 kernel?
Miark
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
When I burn a CD in MDK 10.0 from the commandline or with K3b,
then compare the md5sums of the iso file and /dev/hdc, they are
_always_ different, even if the CD works fine. Is there something
weird with 10.0, or is this a subtle sign of burner problems to
come, or what?
Miark
Good day all
I want to upgrade my 120gb Hard disk to a 160gb Hard disk.
I tried to use norton ghost but the minute it starts on my root partition
it stops. How can I check the integrity of my disk and it's
partition?
Is there another product (linux based) that I can use instead of Ghost
(bear
On Mon, 25 Oct 2004 12:07:32 -0400
Miark [EMAIL PROTECTED] wrote:
When I burn a CD in MDK 10.0 from the commandline or with K3b,
then compare the md5sums of the iso file and /dev/hdc, they are
_always_ different, even if the CD works fine. Is there something
weird with 10.0, or is this a
Miark wrote:
When I burn a CD in MDK 10.0 from the commandline or with K3b,
then compare the md5sums of the iso file and /dev/hdc, they are
_always_ different, even if the CD works fine. Is there something
weird with 10.0, or is this a subtle sign of burner problems to
come, or what?
Miark
Not
Op Mon, 25 Oct 2004 18:31:37 +0200 schreef Alan:
Good day all
I want to upgrade my 120gb Hard disk to a 160gb Hard disk.
I tried to use norton ghost but the minute it starts on my root
partition it stops. How can I check the integrity of my disk and it's
partition?
Is there another product
On Monday 25 October 2004 11:54 am, John Richard Smith wrote:
Miark wrote:
When I burn a CD in MDK 10.0 from the commandline or with K3b,
then compare the md5sums of the iso file and /dev/hdc, they are
_always_ different, even if the CD works fine. Is there something
weird with 10.0, or is
On Monday 25 October 2004 12:31, Alan wrote:
I want to upgrade my 120gb Hard disk to a 160gb Hard disk.
I tried to use norton ghost but the minute it starts on my root partition
it stops. How can I check the integrity of my disk and it's
partition?
Is there another product (linux based)
On Monday 25 October 2004 18:31, Alan wrote:
Good day all
I want to upgrade my 120gb Hard disk to a 160gb Hard disk.
I tried to use norton ghost but the minute it starts on my root partition
it stops. How can I check the integrity of my disk and it's
partition?
Is there another product
Okay bug stuff up...
What does a
lilo time stamp error mean?
i can't boot now.
On Mon, 25 Oct 2004 13:27:05 -0400
Bryan Phinney [EMAIL PROTECTED] wrote:
On Monday 25 October 2004 12:31, Alan wrote:
I want to upgrade my 120gb Hard disk to a 160gb Hard
disk.
I tried to use norton
Which file system is best to use?
Reiser fs or ext3?
__
Herbalife Independent Distributor http://www.healthiest.co.za
Want to buy your Pack or Services from MandrakeSoft?
Go to
Does this digital TV card work with Linux 10? When I use the TV Card control
tool in Manrake Control Centre I select Nebula DigiTV in the card model area
and Auto-detect in the tuner type area. When it starts tuning a console
window pops up and then disappears after about 1 second.
Is there
On Monday 25 October 2004 11:55 am, Miark wrote:
Is anybody here running vmware with the 2.6 kernel?
Yes
--
/g
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club :
On Monday 25 October 2004 14:02, Alan Rolfe wrote:
Okay bug stuff up...
What does a
lilo time stamp error mean?
i can't boot now.
I think that means that the time stamp on the boot.* file is incorrect for
what lilo expects the time stamp to be. This could mean that you issued the
On Monday 25 Oct 2004 19:02, Alan Rolfe wrote:
Okay bug stuff up...
What does a
lilo time stamp error mean?
i can't boot now.
Have you tried booting from the install disk and typing rescue ?
This will allow you to reinstall the bootloader.
--
[EMAIL PROTECTED]
Powered by Mandrake 10
On Mon, 2004-10-25 at 10:55, Miark wrote:
Is anybody here running vmware with the 2.6 kernel?
Miark
I am, on 10.0 Official with no problems: vmware workstation 4.5.2-8848.
You have to run the configuration tool vmware-config.pl to compile the
plugin modules for the new kernel (and for every
Marc wrote:
On Monday 25 October 2004 11:54 am, John Richard Smith wrote:
Miark wrote:
When I burn a CD in MDK 10.0 from the commandline or with K3b,
then compare the md5sums of the iso file and /dev/hdc, they are
_always_ different, even if the CD works fine. Is there something
weird with
N. B. Day wrote:
On Mon, 2004-10-25 at 10:55, Miark wrote:
Is anybody here running vmware with the 2.6 kernel?
Miark
I am, on 10.0 Official with no problems: vmware workstation 4.5.2-8848.
You have to run the configuration tool vmware-config.pl to compile the
plugin modules for the new
Ian wrote:
On Monday 25 Oct 2004 19:02, Alan Rolfe wrote:
Okay bug stuff up...
What does a
lilo time stamp error mean?
i can't boot now.
Have you tried booting from the install disk and typing rescue ?
This will allow you to reinstall the bootloader.
I've just burnt an ISO of G4L (Ghost for
On Mon, 2004-10-25 at 14:26, Alan Rolfe wrote:
Which file system is best to use?
Reiser fs or ext3?
Jfs
LX
--
Trouble with sound? Dump Alsa with an upgrade
to the best: get your free high quality OSS
drivers at www.opensound.com
Superior
On Tue, 2004-10-26 at 01:55, Miark wrote:
Is anybody here running vmware with the 2.6 kernel?
Miark
Yes. Latest version of VMWare Workstation for linux.
Why?
--
stephen kuhn
mobile: 0410-728-389
illawarra and regional new south wales
---
On Tue, 2004-10-26 at 05:27, frankieh wrote:
Ian wrote:
On Monday 25 Oct 2004 19:02, Alan Rolfe wrote:
Okay bug stuff up...
What does a
lilo time stamp error mean?
i can't boot now.
Have you tried booting from the install disk and typing rescue ?
This will allow you to
On Tue, 2004-10-26 at 04:26, Alan Rolfe wrote:
Which file system is best to use?
Reiser fs or ext3?
ReiserFS - and don't listen to LX.
--
stephen kuhn
mobile: 0410-728-389
illawarra and regional new south wales
---
GNU/Linux/OpenSource Solutions
This Linux newbie needs help!!!
No matter how many times I've tried over the last few weeks, I have not
been able to update with Mandrake 10.1. I always get the message:
It is impossible to retreive the list of new packages from the media
'update source.' Either the update media is
Thanks
On Tue, 26 Oct 2004 06:22:11 +1000
Stephen Kühn [EMAIL PROTECTED] wrote:
On Tue, 2004-10-26 at 04:26, Alan Rolfe wrote:
Which file system is best to use?
Reiser fs or ext3?
ReiserFS - and don't listen to LX.
--
stephen kuhn
mobile: 0410-728-389
illawarra and regional new
On Monday 25 October 2004 22:20, Stephen Kühn wrote:
Seems pretty cool, there is a click and copy mode where you can just
select one drive. (eg hda) and then a target drive, (eg hdb) and it will
clone one onto the other..
Franki,
When it does that, can it resize the new partition too or do
On Tue, 2004-10-26 at 06:28, Jack wrote:
This Linux newbie needs help!!!
No matter how many times I've tried over the last few weeks, I have not
been able to update with Mandrake 10.1. I always get the message:
It is impossible to retreive the list of new packages from the media
'update
Jack wrote:
This Linux newbie needs help!!!
No matter how many times I've tried over the last few weeks, I have not
been able to update with Mandrake 10.1. I always get the message:
It is impossible to retreive the list of new packages from the media
'update source.' Either the update media is
H.J.Bathoorn wrote:
On Monday 25 October 2004 22:20, Stephen Kühn wrote:
Seems pretty cool, there is a click and copy mode where you can just
select one drive. (eg hda) and then a target drive, (eg hdb) and it will
clone one onto the other..
Franki,
When it does that, can it resize the new
On Monday 25 Oct 2004 20:27, frankieh wrote:
Ian wrote:
On Monday 25 Oct 2004 19:02, Alan Rolfe wrote:
Okay bug stuff up...
What does a
lilo time stamp error mean?
i can't boot now.
Have you tried booting from the install disk and typing rescue ?
This will allow you to
On Mon, 25 Oct 2004 16:07:12 -0400, Lyvim wrote:
On Mon, 2004-10-25 at 14:26, Alan Rolfe wrote:
Which file system is best to use?
Reiser fs or ext3?
Jfs
Eh?! Don't you mean XFS?
Miark
Want to buy your Pack or Services from
On Tue, 2004-10-26 at 07:09, Miark wrote:
On Mon, 25 Oct 2004 16:07:12 -0400, Lyvim wrote:
On Mon, 2004-10-25 at 14:26, Alan Rolfe wrote:
Which file system is best to use?
Reiser fs or ext3?
Jfs
Eh?! Don't you mean XFS?
Miark
As stated before, don't listen to Miark;
On Mon, 25 Oct 2004 17:54:15 +0100, John wrote:
When I burn a CD in MDK 10.0 from the commandline or with K3b,
then compare the md5sums of the iso file and /dev/hdc, they are
_always_ different, even if the CD works fine. Is there something
weird with 10.0, or is this a subtle sign of burner
On Mon, 25 Oct 2004 12:01:42 -0500, Marc wrote:
On Monday 25 October 2004 11:54 am, John Richard Smith wrote:
Miark wrote:
When I burn a CD in MDK 10.0 from the commandline or with K3b,
then compare the md5sums of the iso file and /dev/hdc, they are
_always_ different, even if the CD
On Mon, 25 Oct 2004 18:26:35 +0200, Thereidos wrote:
On Mon, 25 Oct 2004 12:07:32 -0400
Miark [EMAIL PROTECTED] wrote:
When I burn a CD in MDK 10.0 from the commandline or with
K3b, then compare the md5sums of the iso file and /dev/hdc,
they are_always_ different, even if the CD works
Greetings, I just ordered a new laptop, a Dell Inspiron 1150.
Is there anyone on the list who has experience with this model
and Mandrake Linux??
As best as I could determine, Dell laptops are relatively Linux
compatible/friendly.
Any feedback would be appreciated.
Dell had a great offer on
On Mon, 25 Oct 2004 14:04:30 -0500, N. wrote:
On Mon, 2004-10-25 at 10:55, Miark wrote:
Is anybody here running vmware with the 2.6 kernel?
Miark
I am, on 10.0 Official with no problems: vmware workstation 4.5.2-8848.
You have to run the configuration tool vmware-config.pl to compile
Miark wrote:
One other thing I considered: crappy media. And make no mistake,
I'm using Ritek--the crappiest, most god-awful media on planet.
But when I burned to a RW this morning, I had the same problem
(burning with K3b, with verification checked).
If your burner is modern, 8x is not
I am using konquerer to move stuff from one hard disk to another.
Konquerer reports on 2.5MB/s. Shouldn´t this be faster?
Seems very slow to me.
Any advice will be appreciated
Thanks
--
Using Opera's revolutionary e-mail client: http://www.opera.com/m2/
Poogle wrote:
On Monday 25 Oct 2004 20:27, frankieh wrote:
Ian wrote:
On Monday 25 Oct 2004 19:02, Alan Rolfe wrote:
Okay bug stuff up...
What does a
lilo time stamp error mean?
i can't boot now.
Have you tried booting from the install disk and typing rescue ?
This will allow you to reinstall
On Monday 25 October 2004 23:59, Alan wrote:
I am using konquerer to move stuff from one hard disk to another.
Konquerer reports on 2.5MB/s. Shouldn´t this be faster?
Seems very slow to me.
Any advice will be appreciated
Thanks
Alan,
If you're trying to clone disks with konqueror you're
On October 25, 2004 15:21, Angus Auld wrote:
Greetings, I just ordered a new laptop, a Dell Inspiron 1150.
Is there anyone on the list who has experience with this model
and Mandrake Linux??
As best as I could determine, Dell laptops are relatively Linux
compatible/friendly.
Any feedback
I will second Margot's words, but also add that another problem can be
timeouts from the server you are connecting to.
I always connect to the server with Konqeror before I add it to my sources,
and I avoid .edu sites as they seem to shut down sites on the weekends.
And I also use the lists at
I never got a sympa confirm request for this the first time, and it doesn't
seem to have come through the list, so here it is again:
This past Friday (Oct. 22) I decided it was time to update my Mdk 10.0
system, so I did the usual commands as root:
# urpmi.update -a
# urpmi --auto-select
I
On Mon, 2004-10-25 at 21:47 +0100, Margot wrote:
Community versions of Mandrake do not have updates or update
source media - the updates are contained in the media which you
have already added as sources.
To obtain the updates, instead of using the GUI you must use urpmi.
Open a
On Mon, 25 Oct 2004, Ron Hunter-Duvar wrote:
# urpmi kernel
Everything already installed
Finally, I did the following:
# urpmi kernel-2.6.3.19
ftp://ftp.proxad.net/pub/Distributions_Linux/Mandrakelinux/official/updates/
10.0/RPMS/./kernel-2.6.3.19mdk-1-1mdk.i586.rpm ...
And
On Tue, 26 Oct 2004 07:13:51 +1000, Stephen wrote:
On Tue, 2004-10-26 at 07:09, Miark wrote:
On Mon, 25 Oct 2004 16:07:12 -0400, Lyvim wrote:
On Mon, 2004-10-25 at 14:26, Alan Rolfe wrote:
Which file system is best to use?
Reiser fs or ext3?
Jfs
Eh?! Don't
On Tue, 2004-10-26 at 09:52, Miark wrote:
On Tue, 26 Oct 2004 07:13:51 +1000, Stephen wrote:
On Tue, 2004-10-26 at 07:09, Miark wrote:
On Mon, 25 Oct 2004 16:07:12 -0400, Lyvim wrote:
On Mon, 2004-10-25 at 14:26, Alan Rolfe wrote:
Which file system is best to use?
On Mon, 25 Oct 2004 18:31:37 +0200, Alan wrote:
Is there another product (linux based) that I can use instead of Ghost
(bear in mind it has two ntfs partitions on it as well.
http://www.mondorescue.com will backup or clone any system
running Linux (even if it's a multi-boot system).
Miark
On Mon, 25 Oct 2004 22:35:39 +0100, John wrote:
Miark wrote:
One other thing I considered: crappy media. And make no mistake,
I'm using Ritek--the crappiest, most god-awful media on planet.
But when I burned to a RW this morning, I had the same problem
(burning with K3b, with verification
On Tuesday 26 October 2004 02:01, Miark wrote:
http://www.mondorescue.com will backup or clone any system
running Linux (even if it's a multi-boot system).
Miark
message.footer
well, if you only want to back-up and restore use dump and
restore..both have excelent man-pages:)
--
Good
Saturday at 21:06, Randall D. Hobbs wrote:
Yeah, you're right there. I've had people email me asking why I sent them a
virus... I only had to say I'm running Linux, so I can't send you a virus.
That and check out the headers - that's what tells the truth. I recently
had about 10 viruses
Friday at 18:39, Tom Karen Pino wrote:
To anyone this may concern,
I received this notice from my ISP today.
A message which was sent to you by Russ [EMAIL PROTECTED] has been
identified by our virus filter as being contaminated with a virus. For
your protection, the original message has
Miark wrote:
On Mon, 25 Oct 2004 18:31:37 +0200, Alan wrote:
Is there another product (linux based) that I can use instead of Ghost
(bear in mind it has two ntfs partitions on it as well.
http://www.mondorescue.com will backup or clone any system
running Linux (even if it's a multi-boot
Wednesday at 10:49, Anne Wilson wrote:
Russell, if you don't mind me saying so, you are a sucker for punishment ;-)
Get your switch. It's a doddle after that. You won't believe how easy it is
after what you were trying to do.
Ok, I got the switch, installed it, and the two hosts can ping
At 06:26 PM 10/25/2004, you wrote:
I will second Margot's words, but also add that another problem can be
timeouts from the server you are connecting to.
I always connect to the server with Konqeror before I add it to my sources,
and I avoid .edu sites as they seem to shut down sites on the
On Monday 25 October 2004 07:40 pm, Jack wrote:
On Mon, 2004-10-25 at 21:47 +0100, Margot wrote:
Community versions of Mandrake do not have updates or update
source media - the updates are contained in the media which you
have already added as sources.
To obtain the updates, instead of
with my mdk10 installed i can't play movie directly from a source CD
especially the extension file is DAT or VCD format..
wat do i need to configure my totem media player?
im using Gnome
thanks...
Want to buy your Pack or Services from
On Monday 25 October 2004 09:04 pm, Russell W. Behne wrote:
Ok, I got the switch, installed it, and the two hosts can ping each
other, but neither can ping the server, and when I try to ping either
host from the server I get this error message:
ping: sendmsg: Operation not permitted
Hello,
I've installed the 10.1 Community and I tried to
install nVidia driver. It displays a warning about
incompatibility with rivafb driver module (the kernel
is set to run with). I don't have a Riva.
How could I remove the rivafb module from the kernel?
Thanks,
Mike
=
Best Regards,
Today at 00:22, Greg Meyer wrote:
On Monday 25 October 2004 09:04 pm, Russell W. Behne wrote:
Ok, I got the switch, installed it, and the two hosts can ping each
other, but neither can ping the server, and when I try to ping either
host from the server I get this error message:
ping:
71 matches
Mail list logo
