On Monday 04 April 2005 10:55, Anne Wilson wrote:
I've saved a wrong login in kwallet. How can I get to edit the wallet?
I'm probably overlooking the obvious, but I can't find it.
Anne
Go to Configure your desktop-Security-Launch Wallet Manager
Double click on your wallet.
Then you can
I've been working on setting up a new system at work, using an older Linux
box. The only trouble is the display settings for xwindows are not correct
for the new monotor, and as a result, when I run startx, I get nothing but
lots of moving horozontal lines.
I found xorg.conf, but I'm not sure
On Tuesday 01 March 2005 17:09, Nigel Wilkinson wrote:
--On Tuesday, March 01, 2005 22:53:34 + Nigel Wilkinson
[EMAIL PROTECTED] wrote:
--On Monday, February 28, 2005 16:30:51 -0600 John Michael Schneiderman
[EMAIL PROTECTED] wrote:
I have created a gpg key, but sometimes when I see
I have created a gpg key, but sometimes when I see one of my E-mails in a
post, it says that my signature wasn't valid. I have posted my keys on-line.
--
Injustice is happening now; suffering is happening now. We have choices to
make now. To insist on absolute certainty before starting to apply
On Monday 21 February 2005 23:55, Aron Smith wrote:
On Monday 21 February 2005 09:35 pm, Rosemary McGillicuddy wrote:
On Tuesday 22 Feb 2005 18:33, Aron Smith wrote:
On Monday 21 February 2005 08:30 pm, Rosemary McGillicuddy wrote:
Hi all
Just wondering if there is any
On Monday 21 February 2005 11:32, Julie Sloan wrote:
On Monday 21 February 2005 03:53 am, Rosemary McGillicuddy wrote:
On Mon, 21 Feb 2005 18:19, Dennis Myers wrote:
Rosemary, in my OO.org if I click on the bullets icon on the tool bar
after hitting enter to start a new paragraph, the
On Mandrake 10.1 Community, when I run ps -ef, the UID column shows the user
name for the owner of all processes except the dbus-daemon-1 process owned by
uid 72. The line for that process shows the numeric uid instead of the user
name. /etc/passwd, /etc/shadow and /etc/group all have an entry
From: Anne Wilson [EMAIL PROTECTED]
On Thursday 17 Feb 2005 05:10, Derek Jennings wrote:
That NIC is very common and usually just works. Before you start
worrying
about drivers you should check out some of the more obvious causes of
network problems.
1/ In
From: Derek Jennings [EMAIL PROTECTED]
Can you try choosing a static address just to eliminate any issue with the
DHCP server? Pick a unique address on the same subnet as the router.
There
should not be any need to alter your router configuration. It will not
care
if you use a static address.
From: joe [EMAIL PROTECTED]
Michael Hahn wrote:
First, thanks for the advice about how to get a shell instead of a KDE
session. Worked like a charm.
Second, the box I'm planning to use as a server is a HP pavilion 503n,
which
has a RTL8139 Nic included in the motherboard. I've been trying
Sorry for such a basic question - but I installed Mandrake
10.1 last night ona server I'm setting up, and I wanted it to default to
the shell, rather than KDE, on boot. I can't seem to figure out how to bypass
the very pretty, but unnessary, to even get it to just the
shell.
First, thanks for the advice about how to get a shell instead of a KDE
session. Worked like a charm.
Second, the box I'm planning to use as a server is a HP pavilion 503n, which
has a RTL8139 Nic included in the motherboard. I've been trying to get the
machine up on the network, but each time I
Can somebody give me a link or something to sign up to the Off-topic list?
:-/
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
after upgrading to Mandrake 10.1 official
when I go to open Kontact I get a Sorry-KDE Panel window
with this mesage:
KDEInit could not launch 'kontact-kmail.sh'
on closing the window Kontact and components seem to work fine..
I have googled the error and find nothing of use
any clues? some
Ok, on the advice of several people from this list, I downloaded the 10.1
ISO files, and burned them to CD. Initially the installation seemed to be
working fine, until I reached the end of Partitioning step. I set up the
partitioning, and selected next. I then received an
Internal Error: no kernal
I found the problem. The Md5 checksums of the files I downloaded don't match
up the correct checksums. Back to waiting for a download.
- Original Message -
From: Michael Hahn [EMAIL PROTECTED]
To: newbie@linux-mandrake.com
Sent: Monday, January 03, 2005 6:54 PM
Subject: [newbie] 10.1
From: Anne Wilson [EMAIL PROTECTED]
On Saturday 01 Jan 2005 22:58, Michael Hahn wrote:
I recently needed to replace the hard drive in my M5305 notebook, and
decided to install my old copy of Mandrake Linux (8.2) on it. However,
when
I tried to install, it reached Partition Check: hda (my new
From: Richard Urwin [EMAIL PROTECTED]
On Sunday 02 Jan 2005 1:53 pm, Michael Hahn wrote:
I choose 8.2 because I
already had the OS, and I can't really afford to pay for a new OS as
well as a new hard drive.
Fair enough. Download 10.1, it's GPL - you don't have to pay.
It would be nice
I recently needed to replace the hard drive in my M5305 notebook, and
decided to install my old copy of Mandrake Linux (8.2) on it. However, when
I tried to install, it reached Partition Check: hda (my new hard drive, a
Hitachi HTS424040MSAT00 40 GB) it freezes. It is accessing the HD, but
I am trying to install Mandrake 10.0 on a Dell Latitude 505 laptop. The
installation proceeds without problems until it starts to install the
selected packages. It loads a couple of packages but then just stops. The
mouse still tracks but the hour-glass cursor is displayed, and the
machine
I am running Mandrake Community 10 and I'm having a problem when I try
to do updates from the Mandrake Control Center. No matter with mirror
I goto it says that the hdlist has failed to download. Why is this?
Thanks in advance for your help.
Mike
no
as the default (as part of the comments, uncommented values change the
defaults.
Michael
--
Michael Viron
Founder, mdklinuxfaq.org
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http
. As of 10.0 it was still in
there, so it is a good bet that it is still part of 10.1 CE. Try adding
yourself to floppy and see if that works.
Michael Viron
Founder, mdklinuxfaq.org
Want to buy your Pack or Services from MandrakeSoft?
Go to http
to partitioning, it
really depends on what you are going to use the system for. With a server,
you typically separate /boot, /var /home, /tmp, /, and /usr to separate
partitions. With a desktop, most people will only set up a / and /home
partition (possibly adding /boot).
Michael
--
Michael Viron
Founder
Stephen Kühn wrote:
On Sun, 2004-09-19 at 12:23, michael higgins wrote:
Thanks for your replies. Still, no luck.
The oddest thing is that every test, but for actually using the sound,
shows that everything is loaded and ready to go. Mandrake Control Center
under Hardware doesn't show any sound
Jonesy wrote:
On Sat, 18 Sep 2004 18:04:24 +1000, Stephen Kühn wrote:
On Sat, 2004-09-18 at 13:30, michael higgins wrote:
I was hoping anyone might help me get the sound going on my g-3 macdrake
machine. I did a text install, and it's going well.
But I don't have any sound. I just urpmi'd
Derek Jennings wrote:
Marvellous new for all HitchHiker fans is the broadcast of a new radio series
based on the last three books starting on 21st Sept
http://www.bbc.co.uk/radio4/hitchhikers/
Now the question is. How can I record a real audio stream?
RealPlayer 10 plays the preview stream OK,
Todd Slater wrote:
On Thu, Aug 19, 2004 at 11:29:22AM +0100, Paul Smith wrote:
Dear All
Does somebody know about a program for giving us the number of
occurrences of each word in a text file?
Thanks in advance,
Paul
I don't know of a program that does it--perhaps it's built in to a word
Paul Smith wrote:
michael higgins wrote:
Does somebody know about a program for giving us the number of
occurrences of each word in a text file?
Well, this sounds like a good job for perl...
perl -e 'open F,$ARGV[0];for(F){for(split /\W/,$_){$t{lc
$_}++}}for(sort keys %t){print $_, = , $t
Just grabbed the 9.1 ppc disks. Burned the ISO images. Trying to boot
the machine (beige desktop g3) from the CD fails miserably.
Booting by holding the 'c' key after the chimes works fine with my os9
CD, so booting from the cd is possible.
Anyone have a success story they'd like to share?
column, and, either the message list OR message text. I
cannot simultaneously view the message list and the text of the
highlighted message. I've tried making changes in the view menu but
nothing works. Help.
Michael
Want to buy your Pack
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Michael Tienhaara
Sent: Sunday, July 11, 2004 11:40 PM
To: [EMAIL PROTECTED]
Subject: [newbie] odd behavior with Evolution
Hi,
I've been using Evolution since installing Mandrake 10. Tonight
On Mon, 2004-07-12 at 01:57, Stephen Kuhn wrote:
On Mon, 2004-07-12 at 08:39, Michael Tienhaara wrote:
Hi,
I've been using Evolution since installing Mandrake 10. Tonight the
screen configuration suddenly changed. Before the change I could view a
column of folders on the left
David E. Fox wrote:
On Sat, 10 Jul 2004 19:57:51 -0400
Michael Davis [EMAIL PROTECTED] wrote:
My computer refuses to play MIDI files on the internet, and I can't
figure out why.
With which application and which sound card?
I'm having some problems making it work here too with rosegarden
My computer refuses to play MIDI files on the internet, and I can't
figure out why.
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
ok I have just downloaded the first cd in the mandrake 9.1 ppc set, I
have tried to install it directly by holding down c at startup and
also by using the script thing in the BootX folder of the cd. The only
way I was able to get Mandrake to install was using a text install
after holding down
I am ready to purchase a TV Card
Requirements:
Include cable ready tuner
have s-video in/out
accept antenna or cable
PCI
TVWin (TV-PVR-350) does everything I want. Is this the one to get. Any
cheaper available.
Recommendations??
Mike
- From Virgin Radio UK Virgin Radio Classic Tracks - The original
classic rock station
--
Michael Holt
163 Pine Ave
Snohomish, WA
(360)568-8229
-
LAMP - Linux, Apache, MySQL, PHP.
Want to buy
.
Live - From Virgin Radio UK Virgin Radio Classic Tracks - The original
classic rock station
--
Michael Holt
163 Pine Ave
Snohomish, WA
(360)568-8229
-
LAMP - Linux, Apache, MySQL, PHP
On Tuesday 29 June 2004 10:05 am, Yves Arsenault wrote:
Hello,
I was wondering if there is a DVD decoder for Mandrake 10.
Is there such a beast?
Thanks,
Yves
google for dvdrip. It is a GUI that uses transcode and others. Runs well on
10.0.
Mike
How do I subscribe to the mandrakeot list?
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
On Saturday 12 June 2004 10:44 pm, David E. Fox wrote:
If you're using 10.0 (which seems likely) you want to use the ATA device
for the cdrom, not the scsi device. You'll want to prefix your device
with ATA: (i.e., cdrecord -dev=ATA:1,0,0).
try cdrecord --scanbus -dev=ATA, see what it
On Friday 11 June 2004 01:06 pm, Travis Crook wrote:
Hi All,
This might be a little off-topic, but does anyone know of a good DVD
authoring package? With menu creation?
Thanks!
Have you looked at:
http://dvdauthor.sourceforge.net
Mike
Thanks ZBrandon. I'll try your suggestion. I did look at gftp. The
interface is indeed obscure.
Michael
I had the same problems when trying to connect to my FTP service which
is hosted on a WinXP box. You might try turning of passive ftp for that
site to see if that helps
between directories in seconds. Obviously I'm encountering a Linux
issue when communicating with the site. I will try tech support at the
hosting site to see if they have any suggestions.
Thanks, Michael
Have you tried just using Konqueror? You can bookmark ftp server
connections (password
Hi,
Are you going through a proxy?
I'm not sure I know what that means. I checked the configuration for
Konquerorunder proxy I have connect to the Internet directly
checked.
Michael
I have a terrible time using ftp in
Konqueror while going through my Squid proxy. I have to bypass
Thanks again,
I'm not going through a LAN. My computer connects to the internet
directly through the modem.
Michael
That means that you are not intentionally going a proxy server on your
way to the Internet? If you are on an office LAN you may still be
going through one. I can't
the word reading and below it 0%. After a wait of about 4
minutes the file system on the website appears. However, it takes
another 3 to 4 minutes to open any directory. Every directory change
requires another 3 minutes.
Why would Kbear run so slowly?
Michael
Thanks to everyone for all the replies.
Regards, Michael
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
Hi,
I'm a new Mandrake 10 user. What do most of you use to defrag your hard
drives?
Thanks, Michael
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
Thanks for the reply. Now I'm curioushow? Does it defrag on the
fly? Or, at set times?
Michael
I'm a new Mandrake 10 user. What do most of you use to defrag your hard
drives?
Thanks, Michael
Shouldn't be necessesary to defrag with linux. It does it by itself
Had the same problem. Bought a ZOOM external serial modem for less than
$60. Works great in Linux or Windows.
Michael
But externat hardware controlled serial port modems don't cost a busting
fortune why not treat yourself to one and they work well in both
linux/windblows.
John
Thanks Derek. I now have a couple choices.
Michael
On Thu, 2004-05-06 at 04:58, Derek Jennings wrote:
On Wednesday 05 May 2004 16:55, Michael Tienhaara wrote:
Hi,
I need to switch back and forth between Mandrake 10 and Windows. In
Windows I use Adobe Gamma to set up my monitor
Thanks for the link. Much appreciated.
Michael
On Thu, 2004-05-06 at 02:19, Josenildo Marques wrote:
On Wed, 2004-05-05 at 12:55, Michael Tienhaara wrote:
Hi,
I need to switch back and forth between Mandrake 10 and Windows. In
Windows I use Adobe Gamma to set up my monitor brightness
either in Mandrake or with some
3rd party application?
Thanks, Michael
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
You're right...it's an excellent modem. And it does work great in
Windows.
Now I just need to learn how to get the most out of Mandrake. I've been
away from Unix for 10 years. Things have changed.
Michael
On Sat, 2004-05-01 at 17:55, Carroll Grigsby wrote:
On Saturday 01 May 2004 08:04
gone into settings and have tried everything I can think of but the
problem remains. I'm sure that I'm overlooking the obvious, but, after
hours of fooling with the settings, I have not idea what that might be.
Thanks, Michael
Want to buy
On Sun, 2004-05-02 at 11:37, Kaj Haulrich wrote:
On Sunday 02 May 2004 08:29, Michael Tienhaara wrote:
Michael, what happens if you click file --Send queued Messages
or some such ? - It is a setting somewhere in Kmail.
Kaj Haulrich.
When I send I get the message failed to send some
a bug in
the Mandrake 10 distribution?
Michael
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http
On Sun, 2004-05-02 at 18:19, Jason Jesso wrote:
Wow. I had this same problem today.
I removed all config and reconfigured. Now it works.
Weird!
I tried what you did. No success. Same problem.
Michael
Want to buy your Pack
Hello,
I installed Mandrake about 2 weeks ago, and while I've been able to fix
my sound card issues I cant fix the functionality of the scroll wheel of
my mouse. The mouse is standard 2button/scroll wheel, black with Dell
on it that a friend gave me (the scroll works fine under Windows on
Hello,
I installed Mandrake about 2 weeks ago, and while I've been able to fix
my sound card issues I cant fix the functionality of the scroll wheel of
my mouse. The mouse is standard 2button/scroll wheel, black with Dell
on it that a friend gave me (the scroll works fine under Windows on
Thanks, I'll try that out.
Apologies for the double post.
Cheers,
Mike
Bill Echols wrote:
This is how I got mine to work.
http://linuxquestions.org/questions/history/157510http://linuxquestions.org/
questions/history/157510
Bill
-Original Message-
From: Michael Risley [mailto:[EMAIL
://www.mandrakeclub.com
--
Michael Holt
Snohomish, WA (o_
[EMAIL PROTECTED] (o_ (o_ //\
www.holt-tech.net (/)_ (/)_ V_/_ www.mandrakelinux.com
**
* 59. Wonder what *this* command does
Hello,
Sorry for the stupid question:
I am unable to update my Mandrake 9.2 install. Here is the error
message:
Unable to update medium, it will be automatically disabled.
Errors:
retrieve of source hdlist (or synthesis) failed
no hdlist file found for source update_source
problem reading
On Wed, 2004-01-07 at 08:12, Paul wrote:
Hello all,
I got my new printer in. Epson C44 USB. Hooked it up, and I can see in
the logs that it is recognised as a USB bidirectional device:
Jan 7 16:44:16 nwyfre kernel: usb.c: USB device 2 (vend/prod 0x4b8/0x5)
is not
claimed by any active
On Wed, 2004-01-07 at 21:55, Paul wrote:
Hi Mike,
I know, I remember your post. But since Turboprint looked so promising,
I decided to order the printer. One should expect that it works when
support through software/driver is there.
There is something weird with the USB hookup...
I tried
if you can get a slightly older
model.
--
Michael Holt
Snohomish, WA (o_
[EMAIL PROTECTED] (o_ (o_ //\
www.holt-tech.net (/)_ (/)_ V_/_ www.mandrakelinux.com
**
* 69. ``Why is my rm *.o
On Tue, 2003-12-30 at 14:08, Anne Wilson wrote:
Michael - have you tried the driver from
http://www.epsondevelopers.com/epijs.jsp ?
Anne
Hi Anne,
No, I hadn't, but just took a look. It might be something worth
investigating further - I haven't had much extra time lately to mess
appreciated.
Cheers
Ed Smits
(a true newbie)
mrproject?
--
Michael Holt
Snohomish, WA (o_
[EMAIL PROTECTED] (o_ (o_ //\
www.holt-tech.net (/)_ (/)_ V_/_ www.mandrakelinux.com
server using fetchmail.
Is there just a settting I can set to say use this address as a
SMTP Server?
--
Best regards,
Michael ([EMAIL PROTECTED])
Sign on a clothing store - Come inside and have a fit.
http://www.thompsonmike.co.uk/
PGP KeyID := 0xA9547E32
'To see a world in a grain
is the standalone to have on a
seperate box.
--
Michael
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
on but the address is secretish and thus spam free.
Anyways, i stopped receiving mail from newbie, should i resubscribe?
Hmm i'll perhaps have to read your reply on the archives.
--
Michael
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
really annoys me. The manufacturers
are so jealous of their bogus IP that they won't provide enough info for
us to be compatible.
Civileme
/quote Civileme (whose word was once gospel on this list
--
Michael
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
. So I don't
know, maybe the thing is really dead or I am doing something else
wrong. If anyone gets it to work on a dead drive please post what you
did. Thanks, --
Dennis M. linux user #180842
Your win98 boot floppy loads CD-ROM drivers? not sure of relevance.
--
Michael
Want to buy your
, and if it covers your place plug it in the phone
line, get her ISP account details, (for security she can change the
password first) then set it up from mcc.
--
Michael
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
say it all really. In my understanding all
systemV, thus all linux versions, use init.
--
Michael
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
sound,
don't care about video.
thanks,
joe
--
Michael
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
/SOURCES and
/usr/SRC/RPM/SPECS.
and that's where I'll find a normal rpm?
Unless you make changes they build the standard RPM's anyways. So if you
know how to make changes go ahead else no advantage gained.
--
Michael
Want to buy your Pack or Services from MandrakeSoft?
Go to http
snip
Right now I need to figure out how to get a line more than 1 pixel
wide. Makes for hard reading.
Lee
http://www.ribbonsoft.com/qcad/manual_reference/layers.html
Figure 16, 2/3 of the way down the page.
HTH
--
Michael
Want to buy your Pack or Services from MandrakeSoft?
Go
*** Today, Paul jumped up and screamed: ***
I have a yahoo.com free mail account on which I can't use pop or
forward.
Google for fetchyahoo.pl; I use it, works great.
--
Michael Holt
Snohomish, WA (o_
[EMAIL PROTECTED](o_ (o_ //\
www.holt-tech.net
the greens have
about 5% of our vote and this one smokes dak (hence has a hard time
getting treated seriously).
--
Michael
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Matt Winer mused:
I am running my Mandrake 9.1 in msec level 4. I want to keep it
in
level 4 because I love all of the other security features. But
how do I
prevent password expiration system wide without changing msec
levels?
Thanks!
man chage
Want to buy your Pack or Services from
Hi
Does anyone know if it's possible to set vnc up so that the desktop I
see on my pc is the same as the one I see on VNC
Currently the only solution is having to seperate X servers running
I use the following command:
vncserver :1 -httpd /usr/share/vnc/classes
to get vnc up and running
to prefer lilo so I use that now days.
Strangely, grub was their choice for non-expert install on my first
Mandrake distro 7.1.
--
Michael
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
://www.linuxforkids.org/
--
Michael Holt
Snohomish, WA (o_
[EMAIL PROTECTED](o_ (o_ //\
www.holt-tech.net(/)_ (/)_ V_/_www.mandrake.com
¨For we are God´s workmanship, created in Christ Jesus to do
On Fri, 24 Oct 2003 10:31:34 +0100
Anne Wilson [EMAIL PROTECTED] wrote:
On Friday 24 Oct 2003 5:41 am, Michael Adams wrote:
On Thu, 23 Oct 2003 14:28:38 -0400
Heather/Femme [EMAIL PROTECTED] wrote:
I really need to setup a fuck me! OS beside my normal install
of linux.
sigh
to Tweak as soon as, and then
to Stable after a week or so. If the update breaks any configs i can
figure it out in Tweak first. Try that with windows update, even
HFNetCheck(Shavlik Technologies) isn't that flexible for updating.
--
Michael
Want to buy your Pack or Services from MandrakeSoft?
Go
that there are a large number and that you should do the
updates in init 3 or console mode as KDE/X tends to bork its updates
if running.
--
Michael
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
think to question it.
--
Michael
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
while there's a perfectly
good Corvette in the driveway.
Not my fave analogy, the vet would stay tucked in the garage, and the
wifes lexus -- lada would be kept running get the groceries ;)
(range from a lexus to a lada)
--
Michael
Want to buy your Pack or Services from MandrakeSoft?
Go
Either in hte console put a after the comand ie
amsn
Or press alt + F2 and type in amsn in the window that appears
Mike
[EMAIL PROTECTED] wrote:
Why is it that after I start aMSN via the terminal the terminal session
that I used to start aMSN is dead. Meaning, I can't do anything with
that
im just new to linux also but sounds like u need to install db and gdbm Robert Fisher [EMAIL PROTECTED] wrote:
As I cannot find a specific Mandrake upgrade for Kopete (so that I can use the MSN plugin post October 15) I tried to compile from source.I downloaded and extracted kopete-0.7.2.tar.bz2
On Fri, 17 Oct 2003 10:51:00 +0100
Tony S. Sykes [EMAIL PROTECTED] wrote:
Michael,
This depends on how you want to use the tar files. You can tar and
then use split.
Tony.
-Original Message-
From: Michael Adams [mailto:[EMAIL PROTECTED]
Sent: Friday, October 17, 2003 10:29 AM
Does anyone have a one liner that will tar.bz to CD sized volumes.
TIA
--
Michael
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
that
memory. Has anybody done anything like this? If not too involved I
would like to try it before I buy new.
snip
Terry
If its old RAM more failures will be coming your way. If its new stuff,
take it back where you bought the box/sticks.
--
Michael
Want to buy your Pack or Services from
[EMAIL PROTECTED] mused:
[snip]
so many necks, so little time
badump-bump
--
Michael Holt
Snohomish, WA (o_
[EMAIL PROTECTED](o_ (o_ //\
www.holt-tech.net(/)_ (/)_ V_/_www.mandrake.com
What's the best way to make my MP3s into OGG files?
Thanks
Mike
PS I really like GUIs
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Todd Slater wrote:
On Thu, Oct 09, 2003 at 08:50:44PM +, Michael Lothian wrote:
What's the best way to make my MP3s into OGG files?
Thanks
With the caveat that you're going from one lossy format to another--can
you live with that?
One way would be to use XMMS with the diskwriter
with a min-TWiki to hone our arguments for future
use!
DougB
Now thats a good idea. A Linux/Open Source political issues Twiki
page.
When these issues hit New Zealand i want my arguments ready and be fully
versed.
--
Michael
Want to buy your Pack or Services from MandrakeSoft?
Go
1 - 100 of 2903 matches
Mail list logo
