Larry Marshall wrote:
Thanks for sharing Dennis. I'd try two things. First, just put "lp:" in
front of the label "laserjet". I haven't done this with Linux but other
versions of UNIX I've used allow this syntax (multiple labels). If that
doesn't work, just replicate the laserjet
Larry, I keep getting double messages from you.
I keep getting double msgs of everything :-) I was beginning to think,
however, that this had to do with local filtering of inbound msgs but
maybe not. Are you not getting dupes from anyone else? Lots of people
have complained about that here.
Larry Marshall wrote:
Larry, I keep getting double messages from you.
I keep getting double msgs of everything :-) I was beginning to think,
however, that this had to do with local filtering of inbound msgs but
maybe not. Are you not getting dupes from anyone else? Lots of people
have
No, so far just you.
Well, thanks for letting me know. I've recently switched to Pine and it
sounds like I've got something set up incorrectly.
Cheers --- Larry
Larry:
It's my feeling that there is some kind of randomizer running within the
list server is responsible for the famous duplicate messages. If it
makes you feel any better, I don't recall getting any of your messages
more than once, but tonight I've gotten several of them from Dennis
Veatch
Knock on wood but I am not getting double messages from anyone!! Sure
hope this doesn't change now that I've said this giggle
Patti -- Registered Linux User #184611
Original Message
On 10/15/00, 10:59:59 AM, Larry Marshall [EMAIL PROTECTED] wrote
regarding Re: [newbie] Printing in KDE
It's my feeling that there is some kind of randomizer running within the
list server is responsible for the famous duplicate messages. If it
I haven't heard of such things. Is this done for "fun?"
makes you feel any better, I don't recall getting any of your messages
more than once, but
the command is lpd
--
Mark
** Registered Linux user # 182496 **
On Wed, 19 Jul 2000, Bruce Endries wrote:
I have installed a printer, using printtool, and run the test page
(which prints fine).
My question is: When I try to print in Netscape, I get a window
Are you sure ?
Mine is lpr, lpd doesn't work !
Eric
Mark Weaver wrote:
the command is lpd
--
Mark
** Registered Linux user # 182496 **
On Wed, 19 Jul 2000, Bruce Endries wrote:
I have installed a printer, using printtool, and run the test page
(which prints fine).
my method of printing in netscape used to be:
lpr -Pprintername
altho i possibly stand corrected in this instance.
;)
the command is lpd
--
Mark
** Registered Linux user # 182496 **
On Wed, 19 Jul 2000, Bruce Endries wrote:
I have installed a printer, using
yeah you're right. I always get that mixed up. Sorry...
"Eric MC.D" wrote:
Are you sure ?
Mine is lpr, lpd doesn't work !
Eric
Mark Weaver wrote:
the command is lpd
--
Mark
** Registered Linux user # 182496 **
On Wed, 19 Jul 2000, Bruce Endries wrote:
I have
lpr -Plp0 works fine for me.
--dave
At 14:39 20.07.00, you wrote:
Are you sure ?
Mine is lpr, lpd doesn't work !
Eric
Mark Weaver wrote:
the command is lpd
--
Mark
** Registered Linux user # 182496 **
On Wed, 19 Jul 2000, Bruce Endries wrote:
I have
Bruce,
Try using
'lpr -Pprinter name here'
e.g. "lpr -Plp1"
"Eric MC.D" wrote:
Are you sure ?
Mine is lpr, lpd doesn't work !
Eric
Mark Weaver wrote:
the command is lpd
--
Mark
** Registered Linux user # 182496 **
On Wed, 19 Jul 2000, Bruce Endries wrote:
Mine is lpr as well
On Thu, 20 Jul 2000, you wrote:
Are you sure ?
Mine is lpr, lpd doesn't work !
Eric
Mark Weaver wrote:
the command is lpd
--
Mark
** Registered Linux user # 182496 **
On Wed, 19 Jul 2000, Bruce Endries wrote:
I have installed a
Your printer uses the Canon BJC 600 printer driver,
I have the same one myself
Eunice Thompson
On 30 Jun 2000, Chmouel Boudjnah wrote:
Bill Fisher [EMAIL PROTECTED] writes:
Mandrake 7.0, Canon bjc4400 printer
The only output I get on the printer is the test (I think) stuff which begins:
%!PS-Adobe-2.0
on the first line.
I have an /etc/printcap file, and
a filter file at
Bill Fisher [EMAIL PROTECTED] writes:
Mandrake 7.0, Canon bjc4400 printer
The only output I get on the printer is the test (I think) stuff which begins:
%!PS-Adobe-2.0
on the first line.
I have an /etc/printcap file, and
a filter file at /var/spool/lpd/lp/filter
These were
Sorry,
on my machine as ex.:
ESC x man ENTER manual-entry Enter
Replace manual-entry by the man page
(ex. dump)
Eric
Denis HAVLIK wrote:
I suppose Rials answer is correct, but if all you need is just printing a
page or two from time to time, (x)emacs will make you happy
1) start (x)emacs
hmm... Let's see what "man man" says about this...
-t Use /usr/bin/groff -Tps -mandoc to format the manual page, passing the
output to stdout. The output from /usr/bin/groff -Tps -mandoc may need to
be passed through some filter or another before being printed.
so...
man -t manpage
uninstall the lpd rpm and its dependencies and install the ORIGINAL mandrake
6.1 rpm and associated dependencies.
I had the same problem and there appears to be a bug in all versions after
original 6.1 version.
Cheers:
Michael Perry.
RD. Dep. Netafim Magal.
Linux -- the Ultimate Windows Service
Mike Perry wrote:
Yello Folks!
I am trying to setup printing from 2 Mandrake 7.0 machines
to my Windows95OSR2 Server which has a HP695C attached..
This previously worked fine with Mandrake 6.1.
On both Mandrake Machines when I set them up they print
once and once only (the test print).
"Joseph S. Gardner" wrote:
Which driver did you select? I have the HP 890C and ended up using the
550cUP driver. One word of caution, do not change the default printer
(spooler ?) name ( ie. lp to lp1 ) because when I tried to print from
Nutscrape it came back with an error that it
"vishal bansal" [EMAIL PROTECTED] wrote:
Hi Guys:
I have just installed linux-mandrake 6.1. I selected the right printer
during the installation procedure, but whenever I try to print, I get the
following error.
lpr: connect: Connection refused
jobs queued, but cannot start daemon
In KDE, try playing with printtool. Make sure that you setup the
printer to the correct thing, local, remote, samba, etc. You can
reselect the driver and port there to test.
vishal bansal wrote:
Hi Guys:
I have just installed linux-mandrake 6.1. I selected the right printer
during the
CTED]
Sent: Wednesday, January 19, 2000 8:43 PM
Subject: Re: [newbie] Printing Problems in 6.5
"Wendell" == Wendell E Gragg [EMAIL PROTECTED] writes:
Wendell Actually, I did just purchase a print server. If this
Wendell thing is on a network, is there a possibility that it
Steve Leseman [EMAIL PROTECTED] wrote:
Same problem with an HP Deskjet 693C!
At 05:31 PM 1/18/2000 -0700, you wrote:
Ok. As I mentioned in my rant yesterday, I have a printing problem. I
run on a Compaq Presario 4862. I installed Mandrake 6.5 in a dual boot
setup with Win98se.
Well, this might actually get me to work on email in linux. I have have
spent so much time on this printing problem, I haven't worked on email. I
will try to see if I can get it tonight!
- Original Message -
==
The HP 7xx series
According to http://www.picante.com/~gtaylor/pht/printer_list.cgi?make=Canonformat=full
The Cannon BJC-6000 is a "papaerweight"
Reported to work
on Usenet by Jan Harmsen; may well be "perfect" - if so please fix! May only
run at 720x720? Try the 610 Uniprint drivers, too. I ([EMAIL
"Wendell" == Wendell E Gragg [EMAIL PROTECTED] writes:
Wendell Actually, I did just purchase a print server. If this
Wendell thing is on a network, is there a possibility that it
Wendell would work? It is supposedly network compatible.
[snip]
Hang it off of an MS Windows box and
Thanks - here's the contents of my printcap file:
## Please don't edit this file directly unless you know what you are
doing!# Be warned that the control-panel printtool requires a very strict
format!# Look at the printcap(5) man page for more info.## This file can be
edited with the
At 07:56 20.11.99 -0600, you wrote:
Hi all,
Is anyone using an HP DeskJet 722C with Mandrake? I realize that this is a
'windows only' printer (PPA) but i remember someone working on getting it to
go under Linux. anyone know? any ideas?
Thanks,
Mark E Hood
Works ok in b/w, color support is in
Steve Philp wrote:
Karen Heiby wrote:
Check your manual or tech support for your printer. Some printers clear
out their buffered jobs by pressing a button. I had a printer once that
would clear a job if I held down the paper-advance button for a few
seconds. Good luck, I'm dealing
lprm job#
where job# can be obtained with lpq
If this is what you are doing, then the printer may be printing buffered
data over which the OS has no control... other than that, I don't know.
DvB
On Tue, 16 Nov 1999, Dennis Robertson wrote:
Hello All,
Now that I have got my printer
On Tue, 16 Nov 1999, you wrote:
I'm using linux Mandrake 6.0 with KDE.
I have a remote printer - HP LaserJet 5 - part of the
LAN.
Lpd works when I try printing with lpr but there are
problems when I try to print from Maxwell for example.
I think that there is some problem with filters but I
Try WP8
David P. Greenberg
Bitco Electronics
"In Service to the Recording Industry"
**Rock on with glowing glass**
-Original Message-
From: Mike Fieschko [EMAIL PROTECTED]
To: [EMAIL PROTECTED] [EMAIL PROTECTED]
Date: Tuesday, November 16, 1999 12:29 PM
Subject: [newbie] Printing
I too have had excellant luck with WP8 !!!
William Bouterse
Juneau, Alaska
"Karen" == Karen Heiby [EMAIL PROTECTED] writes:
Mike Fieschko wrote:
[snip]
I do not have an Epson 660, but I notice in Star Office's
Printer Setup, that this model is not listed. What printer
support did you install with Star Office?
I found the printer setup and
16, 1999 3:36 PM
Subject: Re: [newbie] Printing Envelopes NIGHTMARE
I too have had excellant luck with WP8 !!!
William Bouterse
Juneau, Alaska
M Thompson wrote:
Have you already typed "printtool" on a command line? The tests in it fixed
a couple problems that I was having with my printer.
Yes, but thank you!
I get the same error when trying to print to an HP LaserJet through its
JetDirect card (... connection refused jobs queued...). Been trying to get
it working for quite a while. Tried configuring it as both Win/SMB and
Netware and no dice...
DvB
On Thu, 11 Nov 1999, Karen Heiby wrote:
I have
Set WordPerfect to use Passthru Postscript. It will then hand it off to
lpr which does a wonderful job of rendering to the printer.
--
Steve Philp
[snip]
I've tried using WP8 with an Epson Colour 200 - one of those 1997 budget
printers that only ever appeared to be fast
On Mon, 11 Oct 1999, you wrote:
Hello again
I have recently set up my printer, and can print text fine, but my printer
(cannon 4200) is not supported in Word Perfect. Is there a place where I
can get this driver, or how do I get my printer to work?!? Thanks in advance.
I think you
Joe Brault wrote:
Hello again
I have recently set up my printer, and can print text fine, but my printer
(cannon 4200) is not supported in Word Perfect. Is there a place where I
can get this driver, or how do I get my printer to work?!? Thanks in advance.
Joe :)
Set
Murray Strome wrote:
I asked this question before, but did not receive an answer
When I print from KEdit, or if I do cat file | lpr
nothing prints right away, and there is nothing in the queue. If I then
print something else (even a blank page) from other applications (e.g.
Netscape,
On Sun, 05 Sep 1999, you wrote:
Setup the Print Options with "HTML Printing", "lpr", and "Postscript".
Works here (set it up 'special for you!)
Thanks...someone earlier tonight said to try lpr -Plp0 and it
worked I still have my choice of printers, but, as with KMail, it
won't print
I had this problem a while back, RH 5.2 or something.
I have a Canon 4200.
Here's what fixed mine.
In KDE ( I'm assuming your running this) open a terminal and
login as su ( root ).
Run printtool
Configure.
Close.
Reboot.
Your symptoms are exactly like mine were, and running printtool under a
-
From: Hidong Kim [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, August 13, 1999 1:00 PM
Subject: Re: [newbie] Printing from Netscape
John Connell wrote:
Hi All. Can anyone tell me how I can print from Netscape? I have a Canon
BJ4000 and can print test pages i
On Fri, 13 Aug 1999, you wrote:
Huh?
try xpdf
( in a terminal )
Alan
--
===
[EMAIL PROTECTED] ( [EMAIL PROTECTED] )
Coming to you with Linux-Mandrake 6.0
Thanks, Alan. xpdf does it.
Speaking of XPDF, how does one get
I have tried "lpr"--didn't work! Thanks anyway.
John
- Original Message -
From: Hidong Kim [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, August 13, 1999 1:00 PM
Subject: Re: [newbie] Printing from Netscape
John Connell wrote:
Hi All. Can anyone tell me how I can
John Aldrich wrote:
On Fri, 13 Aug 1999, you wrote:
Huh?
try xpdf
( in a terminal )
Alan
--
===
[EMAIL PROTECTED] ( [EMAIL PROTECTED] )
Coming to you with Linux-Mandrake 6.0
Thanks, Alan. xpdf does it.
Thanks anyway.
John
- Original Message -
From: Hidong Kim [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, August 13, 1999 1:00 PM
Subject: Re: [newbie] Printing from Netscape
John Connell wrote:
Hi All. Can anyone tell me how I can print from Netscape? I have a Canon
BJ4000 and
When you type lpr you have to also specify a printer queue, so it would be something
like:
lpr -Plp0
You substitute lp0 with the name of your printer queue.
*
Original message from: John Connell [EMAIL PROTECTED]
When I type "lpr" in the command
r"--didn't work! Thanks anyway.
John
- Original Message -
From: Hidong Kim [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, August 13, 1999 1:00 PM
Subject: Re: [newbie] Printing from Netscape
John Connell wrote:
Hi All. Can anyone tell me how I can print f
John Connell wrote:
Steve Philp wrote:
John Connell wrote:
Hi All. Can anyone tell me how I can print from Netscape? I have a Canon
BJ4000 and can print test pages in L-M6.0, but cannot print from
Netscape.
My printer is on lp0. It keeps asking for the right print
Thanks anyway.
John
- Original Message -
From: Hidong Kim [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, August 13, 1999 1:00 PM
Subject: Re: [newbie] Printing from Netscape
John Connell wrote:
Hi All. Can anyone tell me how I can print from Netscape? I have a Canon
Ty Mixon wrote:
There is an acrobat reader on the Mandrake cd's in the 'Complete' set.
If not, try the adobe website.
--
Huh?
try xpdf
( in a terminal )
Alan
--
===
[EMAIL PROTECTED] ( [EMAIL PROTECTED] )
Coming to you with Linux-Mandrake
There is an acrobat reader on the Mandrake cd's in the 'Complete' set.
If not, try the adobe website.
--
Ty Mixon
e-mail: [EMAIL PROTECTED]
ICQ:26147713
Original Message
On 8/11/99, 1:31:22 PM, Hidong Kim [EMAIL PROTECTED] wrote regarding
[newbie] printing pdf:
Hi,
What is
For me, once I set up my printer for Linux in general all I have to do is hit
the print button and make sure that it's set to print to lpr and portrait and
letter.
However, I can't get Star Office to print . . . .
On Wed, 21 Jul 1999, you wrote:
Does anyone know how to print from netscape? TIA
Lyndon Lininger Sr wrote:
Does anyone know how to print from netscape? TIA
Lyndon Lininger Sr.
When you display what you want, push the "Print" button.
Netscape sends it to lpr. If it doesn't print, its because
you have a general printing problem (not a Netscape problem).
--
Ramon
Ramon Gandia wrote:
Lyndon Lininger Sr wrote:
Does anyone know how to print from netscape? TIA
Lyndon Lininger Sr.
When you display what you want, push the "Print" button.
Netscape sends it to lpr. If it doesn't print, its because
you have a general printing problem (not a
Hmm...do you have your printer set up in Linux? That's What about setting up
the printer in Netscape IIRC (unfortunately, not running Linux here yet,
and don't currently have access to a Linux box at this moment...) Netscape
has it's own Printer config options, plus you have to configure your
Scott
You might check your BIOS setting for your parallel port, you need
to have EPP or bidirectional enabled for this port.
I saw this tip posted May, 29 1999 by Bernhard Rosenkraenzer,
after enabling EPP my printing problems went away.
HTH
Ron Case
From: Scott Sweeney [EMAIL PROTECTED]
To:
On Sun, 6 Jun 1999, Hidong Kim wrote:
How do you print tiff files under Linux?
Load them in a program supporting tiff reading (I think gimp, Netscape and
StarOffice should do) and print from there.
LLaP
bero
Hi all!
Mike Fieschko wrote:
"Karen" == Karen Heiby [EMAIL PROTECTED] writes:
Karen Mike Fieschko wrote:
I do not have an Epson 660, but I notice in Star Office's
Printer Setup, that this model is not listed. What printer
support did you install with Star
Hi Karen,
Karen Heiby wrote:
Mike Fieschko wrote:
"Karen" == Karen Heiby [EMAIL PROTECTED] writes:
Karen I can't find a single application that will print envelopes
Karen correctly. I have an Epson 660. Star Office feeds every
[snip]
I do not have an Epson 660,
201 - 265 of 265 matches
Mail list logo
