Lo potete trovare allegato a questa rivista:
http://www.oltrelinux.com/home.php?num_riv=16
Ciao, Massimo
Lo potete trovare allegato a questa rivista:
http://www.oltrelinux.com/home.php?num_riv=16
Ciao, Massimo
Per completezza dell'informazione c'è anche su Linux magazine. E' solo un
(1) CD, però.
Saluti.
Andrea M.
On Thu, 31 May 2001 22:59:19 +0200 (CEST)
Gigi Cyber [EMAIL PROTECTED] wrote:
Saluti a tutti gli aficionados di questa fantastica
lista,
vi scrivo per esporvi il mio problema.
Ho cercato per la cinquantesima volta di ricompilare
il kernel, volevo passare dal 2.5.3 al 2.4.5.
2.5.3???
Non
On Thu, 31 May 2001 15:27:31 +0200
Alberto Zanoni [EMAIL PROTECTED] wrote:
Ciao,
avendo seri problemi con kmid e kmidi, che non ne vogliono proprio
sapere di
funzionare (Mandrake 7.2, KDE 2.0), vorrei chiedere come sia il vostro
file
/etc/modules.conf. Il mio
e'
pre-install
Il 23:17, lunedì 28 Maggio 2001, Ale ha scritto:
scusate... ho appena installato la mandrake 8.0... all'apparenza
tutto bene nella configurazione, solo che puntualmente, dopo pochi
minuti che la utilizzo, crasha... :-((
Nessun altro indizio? Come stanno ram e processore? Surriscaldati?
Il 15:27, giovedì 31 Maggio 2001, hai scritto:
Ciao,
avendo seri problemi con kmid e kmidi, che non ne vogliono proprio
sapere di funzionare (Mandrake 7.2, KDE 2.0), vorrei chiedere come
sia il vostro file /etc/modules.conf.
Queste righe funzionano bene per una sb16 ISA:
Il 02:30, giovedì 31 Maggio 2001, Daniele Micci ha scritto:
[cut]
2. ACCESSO AL DISCO. Non so da cosa possa dipendere, ma quando
lancio un qualsiasi programma (uso KDE; ho verificato che con GNOME
non succede: in quel caso il PC va veloce come sempre!),
So che il kernel 2.4 fa un uso piu`
Il 08:30, giovedì 31 Maggio 2001, Luca Tabor ha scritto:
Non riesco a digitare neppure il login. Come faccio a bloccare il
loop?
Hai provato a partire con un init = 3 (login testuale)? Una volta
loggato potresti usare un tool testuale come Xconfigurator per
rimettere tutto a posto...
Per
Sul mio computer ho sia Windows che Linux Mandrake 7.1.
Siccome devo reinstallare Windows, come faccio a fare un disco di avvio per
Linux dato che quello che avevo fatto durante l'installazione mi si e'
danneggiato?
Ti sbobino un mio articoletto sull'argomento. Spero sia utile.
saluti
Hm.. I have a cdrom.img-2.2.19-BADZ5 and a hd.img-2.2.19-BADZ5.. which
one should I use and does anyone know how to use them for an install?
Adam Henson
Facts Helpdesk Advisor
Meggitt Petroleum Systems
Tel : 02476 69
Fax:02476 418210
No - no mater what I try it hangs on INIT: version 2.78 booting
Grrr...
-Original Message-
From: [EMAIL PROTECTED] [SMTP:[EMAIL PROTECTED]]
Sent: 01 June 2001 10:13
To: Adam Henson
Subject: [newbie] Latop can't boot
he anny luck so far are you passed init 2.78
Ben de
Yeah, - theres nothing connected to it at all. No fancy devices, no USB
no nothing. PCMCIA network card also removed. Plain old laptop. :-(
a.
-Original Message-
From: serafim [SMTP:[EMAIL PROTECTED]]
Sent: 01 June 2001 10:20
To: Adam Henson
Cc: '[EMAIL PROTECTED]'
How do I configure xfree86 4 to produce legible fonts while still using the
highest resolution on my monitor? The KDE help centre suggests editing the
order of the fonts lines in xf86config, but there are no such lines, just a
note saying that a font server is now used. Where is the relevant
I cannot make LM8.0 find and mount a LaCie 20GB USB hard drive
on a Dell Inspiron. I wrote to LaCie and there answer is the
standard crap from PC/Mac dedicated companies:
No tests have been made on Linux with these disks Officially
supported operationg systems are the following:
- Windows 98
-
[EMAIL PROTECTED] wrote:
is your usb conf. properly.
I cannot make LM8.0 find and mount a LaCie 20GB USB hard drive
on a Dell Inspiron. Did someone make this disk run
properly under any Linux distribution and if so - how?
I am slightly mistaken. My Linux-Mandrake(8.0) finds it but
I have a P200 32M ram Mach64 Video and want to
install 8.0 on it. I have attempted to install 8.0
previously, but when it asked for the 2nd CD, I could
not get the CD drawer to open. I have been able to
install other distro's on it with multiple CD's with
no problem.
Any help would be
On Thursday 31 May 2001 23:53, you wrote:
I just curious about the gcc 2.96 packaged with Mandrake 8.0, is it stable
? because the history of gcc 2.96 packaged with redhat 7.0 was not good
right ?
Well, the number 2.96 was abandoned by the gcc team. We used it to identify
our pruning from
On Friday 01 June 2001 01:25, OOzy Pal wrote:
I have already ordered my system with
MSI K7T Turbo-R
I hope it works fine. Even though it is RAID but I am
running it as a normal IDE.
I hope you realize you have the right to turn it around unopened and I
STRONGLY recommend you do so. I
On Friday 01 June 2001 02:27, Jesús Saucedo wrote:
mandrake 8 setup hangs at the moment the cracklib package is being copied
during the installation process, i am trying to install mandrake 8 on a
celeron 400 pc with 128 ram and a 10 gb hard disk, the same result happens
while trying the same
On Friday 01 June 2001 03:35, Ivor Blockley wrote:
Hi
I just installed mandrake 7.2 and now dos can't see my fat32 extended
partitions (although linux still sees them). Prior to the mandrake install
my harddrive was configured into 5 partitions - a primary dos fat32
parition (c:) which I
I have a similar problem with my CD - it opens but the install program goes
straight into post install and does not attempt to read the second CD (nor
prompt for it). It reports install successful but will not boot into
Mandrake 8. The disks worked fine on another machine using the graphical
On Friday 01 June 2001 11:24, Adam Henson wrote:
Civileme,
You suggested trying an alternative image from the cdrom/images - how
can I use one of these alternative images?
A.
In linux--
dd if=/images/alternatives/cdrom.img-2.2.19-BADZ5 of=/dev/fd0
Use that floppy for boot/install
Are you using the text install? I have a
problem with text installation which sounds similar.
- Original Message -
From:
Jesús
Saucedo
To: [EMAIL PROTECTED]
Sent: Friday, June 01, 2001 1:27 AM
Subject: [newbie] Mandrake 8 setup
hangs
mandrake 8 setup
Greetings,
I wonder if anyone experienced this.
I'm using Mandrake 8.0 and Kmail to download emails from my ISP.
If I have approx 300 or more emails Kmail will crash out after downloading
all the emails. What is left is the Linux blue screen of death!
I've to press CTRL+ALT+Backspace keys to
Just looked at the partition tables with partition magic, and it only
lists a Linux EXT2 filesystem, and one other partition of hex type 85.
Surely this isnt right? When Mandrake installs it repartitions with two
data partitions and a swap partition..? Might this be what is causing
INIT to hang
hi all !
i am experiencing following problem :
i am trying to login to my qpopper (pop3) server and get following PAM error :
PAM_pwdb[2237]: authentication failure; (uid=0) - mylogin for pop3 service
does anyone know why this happens ?..
this is mysterious because my user login doesnt
At 14:45 01.06.2001 +0200, you wrote:
with isp are you shure it sisn't pop2 .
Ben de man
running LM8.0 using KDE2 DT on a AMDk6-3-450mhz 196ram
voodoo2 and rivatnt 2, 6,4 gb hd and tv-card (pinnacle tv rave)
and CDRW 4/4/24 and DVD 40/12
hi
its not the server of my isp but my OWN..and
Damn!
No such luck. I repartitioned the drive with two ext2 partitions and a
swap partition and reinstalled LM8. STILL no joy.. hangs on INIT 2.78.
Is there no way of getting Mandrake running? :-( Someone pleeease
help!
a.
Adam Henson
Facts Helpdesk Advisor
Meggitt Petroleum
Hello,
I've just got a cd writer after all your wonderful advice last week ;-)
I have it installed and working. But not as a cdwriter. it works as a cdrom
and Mandrake found it, but what now.
All the tutorials that I have found refer to using lilo and using modprobe
etc, but I'm using grub,
I used to use JServ to run my servlets on 7.2 but now I don't have
that option anymore.
From what I understand, JServ is now merged into the Jakarta project
and an obvious alternative is Tomcat engine. I can't find the Tomcat
rpm on the 2 downloaded CDs. Am I missing something or is it
I did. From the install cds, but if the burner isn't working as a scsi device
it won't work ;-)
On Friday 01 June 2001 10:13, you wrote:
Hey, Try going to www.tucows.com and getting some Burner software. Install
it and see what happens.
-Original Message-
From: Jordan
On Friday 01 June 2001 14:19, CHAN Kin Poon wrote:
Greetings,
I wonder if anyone experienced this.
I'm using Mandrake 8.0 and Kmail to download emails from my ISP.
If I have approx 300 or more emails Kmail will crash out after downloading
all the emails. What is left is the Linux blue
On Friday 01 June 2001 14:46, Adam Henson wrote:
Just looked at the partition tables with partition magic, and it only
lists a Linux EXT2 filesystem, and one other partition of hex type 85.
Surely this isnt right? When Mandrake installs it repartitions with two
data partitions and a swap
I have just replaced my PC case, a baby AT motherboard into an ATX case. Now
because of the difference between AT and ATX power supplies my PC powers down
when I issue the shutdown command, well almost, the monitor goes into suspend.
Now for the strange part, if I have left my external
Hi
Are you saying that this motherboard will not work
with Linux? If this true then I am screwed.
http://tw.msi.com.tw/showroom/mainboard/eng/k7tturbo-R.htm
--- Civileme [EMAIL PROTECTED] wrote:
On Friday 01 June 2001 01:25, OOzy Pal wrote:
I have already ordered my system with
MSI
On Friday 01 June 2001 22:12, poogle wrote:
I have just replaced my PC case, a baby AT motherboard into an ATX case.
Now because of the difference between AT and ATX power supplies my PC
powers down when I issue the shutdown command, well almost, the monitor
goes into suspend. Now for the
I'm running the A7V133 as well. I could not ask for more in a motherboard.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of OOzy Pal
Sent: Friday, June 01, 2001 10:45 AM
To: Civileme; [EMAIL PROTECTED]
Cc: Brandon Caudle; [EMAIL PROTECTED]
Subject: Re:
It was Fri, 1 Jun 2001 13:17:34 +0200 when Civileme wrote:
MSI K7T Turbo-R
I hope you realize you have the right to turn it around unopened and I
STRONGLY recommend you do so. I can more or less guarantee it will NOT work.
Hot dang, thanks Civileme! I just got in an offer for a new PC, and
On Fri, 1 Jun 2001 17:57:49 +0200
Civileme [EMAIL PROTECTED] wrote:
On Friday 01 June 2001 22:12, poogle wrote:
I have just replaced my PC case, a baby AT motherboard into an ATX
case.
Now because of the difference between AT and ATX power supplies my
PC
powers down when I issue the
On Friday 01 June 2001 17:45, OOzy Pal wrote:
Hi
Are you saying that this motherboard will not work
with Linux? If this true then I am screwed.
http://www.promise.com/PDF/FastTrak100.pdf
Look at operating systems--No linux available... The driver we have to run
it as a regular
Michael,
I'm curious -- what email client do you use? It appears that you are
able to somehow automatically incorporate some boilerplate text in your
replies (First, please try ... difficult to read.) -- I'm curious how
you do that?
Thanks,
Randy Kramer
Michael D. Viron wrote:
First,
I'm using a promise ATA 33/66/100 driver from www.linhardware.com
direct link:
http://lhd.zdnet.com/db/dispdriver.php3?DISP?1069
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Civileme
Sent: Friday, June 01, 2001 11:07 AM
To: OOzy Pal; [EMAIL
Civileme
Are you saying the mother board will not work period? Or are you rather
saying the raid portion of the motherboard will not workie. the onboard
promise adaptor will be supported for the 100 ATA harddrive rate in Linux
but the Raid portion will not work
Tazmun
- Original
hi all
i think i found the solution to my qpopper problem.
it seems that qpopper cant deal with my md5 encr. passwords-
i remember i chose md5 at install-time, but now i would like to change it
back to dont use it, so i am able
to user qpopper
does anybody know how i can disable md5 passwords
Hello
When I got my system, it came with a free AOpen PCI
Winmodem FM56-PM. Before I go and buy a new Linux
compatible modem, I want to make sure that this modem
won't work with linux. Does any one have any
experience in running this modem under linux. See
modem specs and link below:
Model:
I'm trying to configure VMware.
As root, I can configure it to use the existing HD dos partition to run DOS.
As user, i get an error message:
Unable to open the /dev/hda device permission device
How do I give a user permission to access /dev/hda ?
TIA
Ron the Frog, emulating on the banks of
I use the mknod command:...mknod /dev/fd0H1743 b 2 76
and I get. mknod: /dev/fd0H1743: File exists
Well, if the floppy device already exists in /dev, there's not
much point in running a mknod on it -- all that does is create
a special file with entries into the driver table (that's what
I've just installed Mandrake 8.0 in my laptop, Mitac, AMD K6-2, 475 Mhz, Ram
88 Mb. Everything is okey, except:
a. the onboard-modem can not function, but for the time being it is okey,
since my laptop always connects to the network.
b. NIC Billionton 10/100 Base/FastEthernet can not function.
Edit the order of the fonts in the xfs config file:
vi /etc/X11/fs/config
(it probably has the 75 point first and the 100point second. Reverse
that, and put the 100 point first.).
Then, stop restart xfs:
service xfs restart
Then stop restart X
(a little trickier).
If you're using kdm/gdm
On Friday 01 June 2001 19:07, Shawn Dolan wrote:
I'm using a promise ATA 33/66/100 driver from www.linhardware.com
direct link:
http://lhd.zdnet.com/db/dispdriver.php3?DISP?1069
The page shows NO SUPPORT for the RAID controller--the FastTrak which is what
is on the MSI board. It is in
On Friday 01 June 2001 19:13, tazmun wrote:
Civileme
Are you saying the mother board will not work period? Or are you rather
saying the raid portion of the motherboard will not workie. the onboard
promise adaptor will be supported for the 100 ATA harddrive rate in Linux
but the Raid
I have mandrake 7.2 on my computer and also
ý have apache int. pci mdem?:))
is there anyway to work wth my apache modem in the
linux?
Thanks..
I am not sure. It think it is a controller modem or
winmodem.
--- Williams, Kris [EMAIL PROTECTED] wrote:
Is this a WinModem or a Hardware Modem?
-Original Message-
From: OOzy Pal [SMTP:[EMAIL PROTECTED]]
Sent: Friday, June 01, 2001 2:11 PM
To: [EMAIL PROTECTED]
have you tried to find it on www.linmodems.org?
they have quite a list and will tell you the status that they know of.
moose.
At 01:13 PM 01-06-01 -0700, you wrote:
I am not sure. It think it is a controller modem or
winmodem.
--- Williams, Kris [EMAIL PROTECTED] wrote:
Is this a WinModem
On Friday 01 June 2001 20:10, OOzy Pal wrote:
Hello
When I got my system, it came with a free AOpen PCI
Winmodem FM56-PM. Before I go and buy a new Linux
compatible modem, I want to make sure that this modem
won't work with linux. Does any one have any
experience in running this modem
HW:
Epox mbd, w/ resources set manually,
AMD K6-2/350, 256MB SDRAM
3Com 3c509, port=300, irq=10
Everything worked ok under Windows.
Just installed Mandrake 8.0 Standard Edition, and everything appears fine except
the network (internal LAN). On one level it appears to be configured,
56 matches
Mail list logo