List,
I was reading my email and I tried to open another program to check
something and was unable to. So I killed evolution and then was able to
open other programs, but when I tried to start evolution agian the
following appeared:
Cannot activate component
, Terence J. Golightly wrote:
List,
snippity snip snip
Not with eth0, but harddrake no longer seems to be able to
find/restore my sda1. This on a re-install of 9.1 after the messed
up XFree86 upgrade. It may be just a coincidence, but I haven't
found a way round it yet.
Anne
On Sat, 2004-01-03 at 10:58, Dennis Myers wrote:
Bigger snippety snip
Terry
I believe that the XFree86 patches were very poorly thought out, I do not have
some of the problems described but now my xserver will reboot the system or
dump me out of a game after it has run for a while. I am
On Sat, 2004-01-03 at 14:36, Anne Wilson wrote:
On Saturday 03 January 2004 18:24, Terence J. Golightly wrote:
On Sat, 2004-01-03 at 10:58, Dennis Myers wrote:
Anne,
I use an older release. Should that matter. Just thought that there
might be a similar problem.
Terry
List,
I recently installed a Linksys 10/100 Etherfast pci Ethernet card in my
box running 9.1. After some problems not being able to get them
working, and a failed upgrading of X everything appeared fragged so I
reinstalled and updated. At this point I noticed in the boot messages
that hardware
Greetings,
I recently installed rpms for xfce4 from the
http://clevername.homeip.net. I followed the directions until I got to
the part on letting which kdm not my dm know where to find xfce4. I use
gdm. I tried using Fndsession and received no messages and no changes
as far as I can tell. So I
Greetings,
I posted a note several days ago, then I stopped receiving messages from
the list. I checked the archives and didn't find anything past the 15th.
I just resubed and will try again. If you responded to my message
before my apologies.
A while ago I downloaded and installed (1st four
On Fri, 2003-11-21 at 22:23, Eric Huff wrote:
This was just posted on the expert list, try fdnSessions and it
should add the entry to gdm and or kdm. I have not tryed it so
let us know how it works.
typo:
fndSession
eric
Eric,
I found it on my system. I can't find a man page for
On Fri, 2003-11-21 at 22:56, Eric Huff wrote:
This was just posted on the expert list, try fdnSessions and
it should add the entry to gdm and or kdm. I have not tryed
it so let us know how it works.
fndSession
Eric,
I found it on my system. I can't find a man page
On Thu, 2003-10-23 at 09:45, Tom Brinkman wrote:
Then I'm using only 860M of ram and not all 1024, right?
Yes, but the performance will be better than using all 1024MB's.
The memory management needed to address 1GB or more of ram imposes a
performance hit.
Tom,
I added mem=860 to
On Wed, 2003-10-22 at 16:54, Tom Brinkman wrote:
snip
Barefoot on a tile floor is my method ;) If your not familiar
with bios ram timing options, set the ram to auto or bios defaults.
Cas 3, precharge 3, banking disabled are the safest (but slowest)
settings.
Memtest gave me errors
On Wed, 2003-10-22 at 18:36, Tom Brinkman wrote:
Snip snip snip
But, I took some precautions. First I d/l'd a 1 GB ram
capable kernel (2.4.22-18mdk-i686-up-4GB) an installed it.
I'll check on my Mdk cds. Would I be able to urpmi it?
You don't mention versions. 9.2 should
Tom/List,
I bought the memory according to a newer post to you sent (I can't find
it :( ). Got the Two 512 MB sticks in the mail and stuck them both in
(using proper static aviodance procedure) and tested. Memtest gave me
errors in the five figure area. I shutdown and tested each stick
Snip
Tom,
Thanks for all your help. I ordered two 512MB DIMMS. That should keep
me for awhile. :)
Terry
On Sat, 2003-10-18 at 09:44, Tom Brinkman wrote:
http://www.soyousa.com/products/proddesc.php?id=108
Board uses 184 pin DDR. FSB is 266, so it needs at least pc2100.
So buy DDR
On Fri, 2003-10-17 at 16:48, Tom Brinkman wrote:
On Friday October 17 2003 02:00 pm, ed tharp wrote:
Contacts are gold. Looked pretty clean to (me the uninitiated)
:).
Blow out any dust from the mobo slots.
Used my mini vac. Need to get a can of 'Air' though.
bad idea,,,
List,
I sent a couple of posts the past 2 to 3 days and I am not seeing my
posts to the list but I am seeing the replies. Any idea?
Tia,
Terry
--
Terence Golightly [EMAIL PROTECTED]
Mandrake 9.1 - 2.4.21-0.13mdk | Gnome 2.0 | Evolution 1.4.4 | Opera 7.11
Soyo
On Thu, 2003-10-16 at 10:31, Tom Brinkman wrote:
Snip Snip Snip
Terry
First, remove the ram and clean the contacts. A pencil eraser is
good for this. Rub lightly, if it's decent ram the contacts are
gold. Blow out any dust from the mobo slots. Re-seat the ram and
check again. Try
On Thu, 2003-10-16 at 17:52, Michael Adams wrote:
On Wed, 15 Oct 2003 19:05:29 -0400
Terence J. Golightly [EMAIL PROTECTED] wrote:
Snippety Snip
If its old RAM more failures will be coming your way. If its new stuff,
take it back where you bought the box/sticks.
Mike,
Its over a year old
Greetings,
I posted last month message me thinks I got a virus. Well.. I'm
almost positive that I don't have a virus. I am still having the
locking up problem and I downloaded memtest ISO burned it to a CD and
ran the standard tests. It locked up on test 5 with errors in the 5
figures range.
On Thu, 2003-10-02 at 02:46, Sharrea Day wrote:
On Wed, 01 Oct 2003 18:48, Raffaele Belardi wrote:
I think e2fschk is a front end that invokes the correct fsck.* program.
If you type man fsck.ext3 you are shown the e2fschk man page.
On my MDK9.1 there is no fsck.reiserfs command, only
On Tue, 2003-09-30 at 02:55, Raffaele Belardi wrote:
Or bad disk.I've had two disks breaking up recently, behaviour is always
_very_ strange.
You could check partitions with
# e2fschk -f -c /dev/hda?
-f forces the check
-c performs bad block scan (I've never done this, don't know how
List,
I just started my machine after leaving it off while away from home. I
noticed that when I booted the machine, right over the third? column
where the devices are listed with there associated interrupts was a
rectangular section colored green with four greek letters shaped like
Es (I can't
On Mon, 2003-09-29 at 18:13, Mark Weaver wrote:
Terence J. Golightly wrote:
List,
I just started my machine after leaving it off while away from home. I
noticed that when I booted the machine, right over the third? column
where the devices are listed with there associated interrupts
On Mon, 2003-09-29 at 18:49, Glenn Wright wrote:
On Mon, 2003-09-29 at 17:13, Mark Weaver wrote:
snip
Mark;
I think he's referring to the series of steps in
http://www.mandrakeuser.org/docs/mdoc/ref/ts-system-freeze.html
snip
On Sun, 2003-09-21 at 22:54, Charlie M. wrote:
snip
Charlie,
Last question answered first. My public key is on the MIT keyserver
Just input the number
I tried to cut and paste a search on your key at the end of your
message, but got a keyserver error message code not found. I don't
think I
On Sat, 2003-09-20 at 23:13, Charlie M. wrote:
snip
- From the main plf page:
http://plf.zarb.org/
1.3) Keys
You can download the GPG keys of the project. Remember you have to import them
into your root's keyring, as RPM installation is done under this identity.
PLF trick of the
List members,
I am trying to install mplayer and the site knight.zarb.org has the
wrong version of the file on its ftp server. MCC and urpmi do not find
the file:
real-codecs-1.1-1plf.i586.rpm
instead it has the file:
real-codecs-1.2-1plf.i586.rpm
and the install fails. I am wondering if
On Sat, 2003-09-20 at 16:20, Björn Lundin wrote:
Bjorn
cut
cut
Do an ' urpmi.update -a' and try again. (it will force an update of
your local repository)
Yeah Thanks, I did just that and was able to get past the version problems.
However, I now get some bad signature messages (public key
Greetings list members,
Recently, I have been having problems with my system, evolution and
opera 7.11. It has caused me to recycle the machine several times
causing corrupted files that couldn't be repaired by me. So, I saved my
home directory and reinstalled the system according to a fellow
On Sun, 2003-06-22 at 06:42, Derek Jennings wrote:
Have you been doing your security updates? There is an updated urpmi available
which I think addresses this sort if issue. Assuming you have an update
source defined then
urpmi urpmi (in a root terminal)
did that got the update..
If
Greetings List,
I just started having a problem with my cdrom not finding any files on
my installation cds. I was getting listings before I started playing an
audio cd. I wanted to install lm_sensors using rpmdrake. It requested
that I place the
Medium Installation CD2 (x86) (cdrom2) on device
On Fri, 2003-06-20 at 10:15, [EMAIL PROTECTED] wrote:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Aron Smith
Sent: Thursday, June 19, 2003 11:58 PM
To: Newbie
Subject: Re: [newbie] Orrin Hatch: farging icehole!
Big Snip.
He's a RINO
On Sun, 2003-06-15 at 20:44, Stephen Kuhn wrote:
snip
Directly edit the ~/home/yournamehere/.gnome/Gnome file:
[URL Handlers]
default-show=opera %s
info-show=nautilus --no-desktop %s
man-show=nautilus --no-desktop %s
ghelp-show=nautilus --no-desktop %s
...is how yours should be
On Sun, 2003-03-09 at 21:18, Terence J. Golightly wrote:
List,
Sorry about that last post too much of everything. I'm hoping now someone can help me
fix
what I think is a sendmail problem. Please readon.
My system keeps dumping undeliverable system mail to a folder
/var/spool/clientmqueue
List,
My system keeps dumping undeliverable system mail to a folder
/var/spool/clientmqueue. It eventually fills up my /var partition and
brings my pc to a crawl. I was able to write a perl script to delete the
'lost' mail for now, but I would like to repair it permanently. I have
sendmail
Ignore just testing.
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
List
I just upgraded from mdk 8.1 to 8.2 kernel 2.4.18-6. I am using gnome
1.4.0.6. Every time I login my mouse reverts to right handed
orientation and the background to blue. When changing the mouse settings back to left
handed control the mouse config window displays left hand selected. When
List(s)
I just upgraded from mdk 8.1 to 8.2 kernel 2.4.18-6. I am using gnome
1.4.0.6. Every time I login my mouse reverts to right handed
orientation. I must go to settings | mouse to reapply left handed
settings. I say reapply because when the mouse settings window appears,
it shows left
Hello List,
I have two machines one is my workstation running 8.1 on an Athlon 2100
+ 256mb of ram and two maxtor hard disks a 40gm and a 12gb. My other
machine is a K6 300mhz box running 95 rel 2. I would like to netwok
these two where sharing a network connection 'might' be possible and the
I sent this message out on monday and I didn't see it posted. I apologize to the list
for the bandwidth.
List
I am currently unable to configure my visualization plugins in xmms
version 1.2.6. I get a stack constraint failed error. It happens when
the window opens the error message appears
List,
I am currently unable to configure my visualization plugins in xmms
version 1.2.6. I get a stack constraint failed error. It happens when
the window opens the error message appears and I am unable to access any
part of the window except the close window button at the top of the
window.
On Mon, 2002-07-01 at 18:28, Dennis Myers wrote:
On Monday 01 July 2002 05:25 pm, you wrote:
On Mon, 2002-07-01 at 10:10, tom brinkman wrote:
On Sunday 30 June 2002 03:37 pm, Terence J. Golightly wrote:
sensors -s gives a no sensors found message. I looked at the
sensors.conf
On Mon, 2002-07-01 at 21:55, tom brinkman wrote:
On Monday 01 July 2002 04:25 pm, Terence J. Golightly wrote:
scan ISA bus yes
bunch of error messages for chips that arn't on my board.
That's normal
Summary of probes just done:
press enter to continue. didn't print anything
List,
I just bought a Hardcano 3 Combo hd cooler cpu fan controller and temp
sensor. It has a digital display for the temp a fan and a switch for 3
speed settings. Has anybody set something like this up? I have a Soyo
K7VXA-2BA2 MoBo running an XP 2000 + chip. Most of the setup is from
there
On Mon, 2002-06-24 at 10:37, tom brinkman wrote:
I suspect he's got the FSB set to 100 rather than 133. On some
Soyo motherboards this can be set in bios, some require 2 jumper
settings on the mobo. Terry's got his XP runnin at 12.5x100, rather
than 12.5x133
--
Tom
Tom,
On Mon, 2002-06-24 at 20:25, tom brinkman wrote:
On Monday 24 June 2002 03:57 pm, Terence J. Golightly wrote:
On Mon, 2002-06-24 at 10:37, tom brinkman wrote:
I suspect he's got the FSB set to 100 rather than 133. On
some Soyo motherboards this can be set in bios, some
On Sat, 22 Apr 2000, Oder Santos wrote:
I don't know if this is a off topic question but I have no idea where can I
find alt.os.linuxmandrake in a public news server. Does anyone have any
information? Thanks in advance. Oder.
Oder,
try alt.os.linux.mandrake
terry
--
Hello,
This is a repost of a message to the list that went unreplied to, so
please excuse any faux pauxs that I may have commited. I have a problem
which I hope somebody else has encountered and remedied. I am presently
using Mandrake 6.0 with kernel 2.2.13. My modem is a U.S. Robotics 56k
Dear list,
Long time follower, first time poster. Help. I have a problem which
has been covered before I believe back in 12/99. I get the error
message that my kernel doesn't have ppp support built and to contact the
system administrator . I click the ok button and the CONNECT window
comes
test, test, test
James Richards wrote:
Hello,
I recently installed Mandrake-Linux 6.0. It installed fine and I was
[foolishly] playing with the
themes for KDE running as root [wasn't thinking on that one]. I was
switching through themes when suddenly my desktop blanked out and
locked. I was able to
51 matches
Mail list logo
