Hi,
the openSUSE:Factory distro got an update and does use gcc 4.3 from now on as
default compiler.
This may have some effect when compiling your stuff inside or outside of the
build service.
bye
adrian
--
Adrian Schroeter
SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg)
Am Montag 12 November 2007 schrieb Rajko M.:
On Friday 26 October 2007 01:02:42 pm Rajko M. wrote:
Tried to update KDE4 to newest and got dependency problem that seems to
be software management problem (or KDE4 packaging):
Message 1 (there is another 2 about libkdefx.so.5()(64bit) )
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Adrian � escribió:
Hi,
the openSUSE:Factory distro got an update and does use gcc 4.3 from now on as
default compiler.
This may have some effect when compiling your stuff inside or outside of the
build service.
bye
adrian
Hi:
Problems
hi roger
I must say that VMware until version 6.0.2 does not support openSUSE
10.3 as host or guest. So to get it working, you will have to upgrade
to VMware 6.0.1 at least. It must be understood however that even the
version 6.0.2 and 6.0.1 have
only the EXPERIMENTAL support for openSUSE 10.3
I too had the same issue on openSUSE 10.2 and SLED. I too was unabloe
to sole the problem. I think that we do need an UPDATE or a PATCH for
that thing.
Thanks
On 11/12/07, Roger Oberholtzer [EMAIL PROTECTED] wrote:
I have a new issue with smart on opensuse 10.0: I cannot do an update,
install,
On Mon, 2007-11-12 at 13:37 +0530, Vaibhav Kaushal wrote:
hi roger
I must say that VMware until version 6.0.2 does not support openSUSE
10.3 as host or guest. So to get it working, you will have to upgrade
to VMware 6.0.1 at least. It must be understood however that even the
version 6.0.2
Ive checked the suse sites and did a bit of searching, but I cant get a
clean cut answer about the compatibility of the latest ATI driver and
the Radeon 9000 and TV-out.
I just need TV-out support - apparently the ati driver cant enable it.
You need the official ATI driver for it - but some report
BTW, openSUSE 10.3 comes with VirtualBOX and you can install it from
DVD it is also a good virtualizer.
But then you need a 10.3 install into which you can install more virtual
10.3's, right? And you need to run them on 10.3.
U no. You can install VirtualBox on all sorts of different
Hans van der Merwe wrote:
Ive checked the suse sites and did a bit of searching, but I cant get a
clean cut answer about the compatibility of the latest ATI driver and
the Radeon 9000 and TV-out.
I just need TV-out support - apparently the ati driver cant enable it.
You need the official ATI
Hey,
JJB wrote:
I set up bonding on our SUSE machines as described in a thread from a
few weeks ago. Instead of boosting network performance, the effect was
to degrade network performance significantly.. The setting was the rr
round robin setting.
How did you verified the performance loss
Frank Fiene wrote:
On Montag 12 November 2007, kernel.2k5 wrote:
hello All ,
I am having 2 different office with following info :
Office _1 : Open Suse 10.3 64 bit as Squid , Router , VOIP local Box
, and NFS ISO Server and SLP.
Office _ 2: Windows 2003 with FTP facility , connected
On Mon, 2007-11-12 at 10:01 +0100, Eberhard Roloff wrote:
Hans van der Merwe wrote:
I just need TV-out support - apparently the ati driver cant enable it.
You need the official ATI driver for it - but some report that the old
Radeon cards are not supported anymore? And the old driver wont
Roger Oberholtzer wrote:
On Mon, 2007-11-12 at 13:37 +0530, Vaibhav Kaushal wrote:
hi roger
I must say that VMware until version 6.0.2 does not support openSUSE
10.3 as host or guest. So to get it working, you will have to upgrade
to VMware 6.0.1 at least. It must be understood however that
Eberhard Roloff wrote:
BTW, openSUSE 10.3 comes with VirtualBOX and you can install it from
DVD it is also a good virtualizer.
But then you need a 10.3 install into which you can install more virtual
10.3's, right? And you need to run them on 10.3.
Did you try with the free -as in beer-
Hans van der Merwe wrote:
On Mon, 2007-11-12 at 10:01 +0100, Eberhard Roloff wrote:
Hans van der Merwe wrote:
I just need TV-out support - apparently the ati driver cant enable it.
You need the official ATI driver for it - but some report that the old
Radeon cards are not supported anymore?
On Mon, 2007-11-12 at 10:52 +0100, Eberhard Roloff wrote:
Did you try with the free -as in beer- vmware server?
Not the server.
I did not try 10.3 with it yet, but it is much more frequently updated
and therefore way fresher than your vmware workstation 5.5 installation.
I use the 5.5
I run vmware workstation 5.5.5-56455 as well on a SuSE 10.3 host. I had to
apply a patch (I'd have to look where I found it but it's named something
like vmware-any-any-patch and it doe work.
Thierry
On Monday 12 November 2007, Roger Oberholtzer wrote:
On Mon, 2007-11-12 at 10:52 +0100,
On Mon, 2007-11-12 at 11:11 +0100, Eberhard Roloff wrote:
Hans van der Merwe wrote:
Hopefully the fact that AMD is now on the open source bandwagon will
convince me to go back to ATI in the future.
Not for me, I prefer to buy where I am treated like a worthy customer.
Eberhard
On Sunday 11 November 2007 01:41, Chris Arnold wrote:
I have a bunch of html files that i need to do a couple of things to:
1.remove the html and head tags and replace them with other code
perl -p -i -e 's/oldtext/newtext/' *.html
2.rename the file to .php
mmv *.html #1.php
(you might have
Hello :-)
I have a new laptop with vista and installed easily 10.3.
May I use the vista partition from virtualbox (preferably) or vmware?
I fear to kill it trying :-(
thanks
jdd
--
http://www.dodin.net
On Mon, 2007-11-12 at 11:24 +0100, Thierry de Coulon wrote:
I run vmware workstation 5.5.5-56455 as well on a SuSE 10.3 host. I had to
apply a patch (I'd have to look where I found it but it's named something
like vmware-any-any-patch and it doe work.
When I eventually update to 10.3 I can
jdd wrote:
Hello :-)
I have a new laptop with vista and installed easily 10.3.
May I use the vista partition from virtualbox (preferably) or vmware?
I fear to kill it trying :-(
thanks
jdd
I do not know about virtualbox.
With vmware, you could have a chance.
I tried recently with
Thierry de Coulon wrote:
I run vmware workstation 5.5.5-56455 as well on a SuSE 10.3 host. I had to
apply a patch (I'd have to look where I found it but it's named something
like vmware-any-any-patch and it doe work.
Thierry
On Monday 12 November 2007, Roger Oberholtzer wrote:
On Mon,
Hello:
Wow. Things must be going _really_ well on your system if
you're down to trying to get the NVIDIA logo to display!
It's not that it is so important but it is strange that it does not
show. If something changes without my intervention I like to
know what the reason is.
I do indeed see
Hans van der Merwe wrote:
On Mon, 2007-11-12 at 11:11 +0100, Eberhard Roloff wrote:
Hans van der Merwe wrote:
Hopefully the fact that AMD is now on the open source bandwagon will
convince me to go back to ATI in the future.
Not for me, I prefer to buy where I am treated like a worthy
On Mon, 2007-11-12 at 12:29 +0100, Eberhard Roloff wrote:
Thierry de Coulon wrote:
I run vmware workstation 5.5.5-56455 as well on a SuSE 10.3 host. I had to
apply a patch (I'd have to look where I found it but it's named something
like vmware-any-any-patch and it doe work.
Thierry
Yep. That is the problem. At least for me. It seems odd that no one on
this list has tried to install 10.3 in vmware. I only recall a thread
about installing vmware itself on 10.3.
H strange. I have VMWare 6.something at home, running on an
openSUSE 10.2 host, and I installed 10.3 into
Roger Oberholtzer wrote:
I am running the latest 5.5.x vmware on OpenUSUE 10.0. I want to install
OpenSUSE 10.3 as a client. Every time I try, the 10.3 install takes me
to a character screen where I can set up partitions and all. Obviously
there is something missing in the vmware environment.
Thierry de Coulon wrote:
I run vmware workstation 5.5.5-56455 as well on a SuSE 10.3 host. I had
to
apply a patch (I'd have to look where I found it but it's named
something
like vmware-any-any-patch and it doe work.
Thierry
On Monday 12 November 2007, Roger Oberholtzer wrote:
On Mon,
On Mon, 2007-11-12 at 13:30 +0100, Leen de Braal wrote:
Thierry de Coulon wrote:
I run vmware workstation 5.5.5-56455 as well on a SuSE 10.3 host. I had
to
apply a patch (I'd have to look where I found it but it's named
something
like vmware-any-any-patch and it doe work.
Thierry
Hi,
same here i got the same problem, may be more simple than yours
till now i cant connect to host samba sharing wonder how? i've read
the manual but still don't understand. any tutorial esp on host only
i think vmware conf more simple than VB but it takes much resource
than VB
Eberhard Roloff a écrit :
jdd wrote:
Hello :-)
I have a new laptop with vista and installed easily 10.3.
May I use the vista partition from virtualbox (preferably) or vmware?
I fear to kill it trying :-(
thanks
jdd
I do not know about virtualbox.
With vmware, you could have a
On Mon, 2007-11-12 at 13:30 +0100, Leen de Braal wrote:
Thierry de Coulon wrote:
I run vmware workstation 5.5.5-56455 as well on a SuSE 10.3 host. I
had
to
apply a patch (I'd have to look where I found it but it's named
something
like vmware-any-any-patch and it doe work.
Hi
Gnome System Monitor is added by right clicking the taskbar, add to
panel, System Monitor (On my pc it's somewhere 3/4 th down), Add.
There are a lot of cool tools in system monitor. I have Processor use,
memory use, Network use, Swap space and total system load.
In add to panel there are a
Catimimi wrote:
If it happens to work since hardwares are different, Vista will detect
that it is installed on a new machine and
will no longer be activated on your laptop!!
good idea I had to ask... thanks
jdd
--
http://www.dodin.net
Richard Creighton wrote:
Roger Oberholtzer wrote:
I am running the latest 5.5.x vmware on OpenUSUE 10.0. I want to install
OpenSUSE 10.3 as a client. Every time I try, the 10.3 install takes me
to a character screen where I can set up partitions and all. Obviously
there is something missing
Hi,
Am Sonntag, 11. November 2007 03:08:18 schrieb James Knott:
Does KNetworkManager actually work with OpenVPN. I've installed the
OpenVPN part of KnetworkManager and trying everything I can think of, I
cannot get it to connect. I get an error message:
VPN Connect Failure
Could not start
Roger Oberholtzer wrote:
[...]
Do you remember which one that was? My java 1.6 no longer works. It did
for a bit and I could run, say, eclipse. But something messed it up and
I do not think the java itself is installed correct.
On my computer, I had to reset all the java related links
Whenever I turn-on my computer, my newly installed OpenSuSE 10.3 is
prompting me to login (black and white screen) instead of the green
coloured KDE login screen. The only way I can do is to login with root
account and then key-in the command kdm, then the system will show me
the KDE login
You should check to see if you are supposed to be starting in graphical mode
or command line mode. Look in the inittab to see if you are going to run
level 3 or 5
grep id: /etc/inittab
If you see
id:5:initdefault:
Then you need to figure out what is wrong with gdm or kdm.
If you see id:3:
On Mon, 2007-11-12 at 13:57 +0100, Leen de Braal wrote:
On Mon, 2007-11-12 at 13:30 +0100, Leen de Braal wrote:
Thierry de Coulon wrote:
I run vmware workstation 5.5.5-56455 as well on a SuSE 10.3 host. I
had
to
apply a patch (I'd have to look where I found it but it's named
Problem: /tmp is growing unlimited. Most of the files taken the space
are img.out.XX (XX= numbers). There is also audio.pcm of 1.6 GB but it
is only one. /temp is now 22 GB. The system is almost unusable.
Ref: opensuse 10.3 64b / compiz-fusion /amd fx-55 /nvidia 8800. I run
all the updates as
On Sunday 11 November 2007 16:26, Myrosia Dzikovska wrote:
I might, but the point is: it all worked in 9.3 and 10.0. So it's not
as if there is no working Linux driver - but there is backwards
incompatibility, which I always thought was one of the worst Windows
traits.
The way that backwards
Hans van der Merwe wrote:
On Mon, 2007-11-12 at 10:01 +0100, Eberhard Roloff wrote:
Hans van der Merwe wrote:
I just need TV-out support - apparently the ati driver cant enable it.
You need the official ATI driver for it - but some report that the old
Radeon cards are not supported
On Sun, 2007-11-11 at 22:55 -0500, Carl Luescher wrote:
On Sunday 11 November 2007 09:38, [EMAIL PROTECTED] wrote:
Hello All
The subject says it all. I have finally after much tinkering, googling got
Compiz (compiz-fusion) running under OSS 10.3 64 bit. However, now the
screen saver
On Monday 12 November 2007 16:02:33 Teruel de Campo MD wrote:
Problem: /tmp is growing unlimited. Most of the files taken the space
are img.out.XX (XX= numbers). There is also audio.pcm of 1.6 GB but it
is only one. /temp is now 22 GB. The system is almost unusable.
Ref: opensuse 10.3 64b /
On Mon, 2007-11-12 at 13:57 +0100, Leen de Braal wrote:
On Mon, 2007-11-12 at 13:30 +0100, Leen de Braal wrote:
Thierry de Coulon wrote:
I run vmware workstation 5.5.5-56455 as well on a SuSE 10.3 host.
I
had
to
apply a patch (I'd have to look where I found it but it's named
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
The Monday 2007-11-12 at 08:02 -0700, Teruel de Campo MD wrote:
Problem: /tmp is growing unlimited. Most of the files taken the space
are img.out.XX (XX= numbers). There is also audio.pcm of 1.6 GB but it
is only one. /temp is now 22 GB. The
Helmut Schaa wrote:
Hi,
Am Sonntag, 11. November 2007 03:08:18 schrieb James Knott:
Does KNetworkManager actually work with OpenVPN. I've installed the
OpenVPN part of KnetworkManager and trying everything I can think of, I
cannot get it to connect. I get an error message:
VPN
Eberhard Roloff wrote:
Richard Creighton wrote:
Roger Oberholtzer wrote:
I am running the latest 5.5.x vmware on OpenUSUE 10.0. I want to install
OpenSUSE 10.3 as a client. Every time I try, the 10.3 install takes me
to a character screen where I can set up partitions and all. Obviously
On Sat, 2007-11-10 at 12:08 +0100, Ortwin Ebhardt wrote:
Leo Eraly wrote:
On Sat, 2007-11-10 at 18:57 +0800, williamkow wrote:
williamkow wrote:
Could anybody highlight me 'some' of the major differences between
OpenSuSE 10.3and SUSE Linux Enterprise Desktop 10
On Mon, 2007-11-12 at 16:30 +0100, Leen de Braal wrote:
Did you have enough RAM configured for your VM? Mine is 256 now, and it
runs, but maybe you need to take some more for the install (512).
Give Leen a cigar. (A chocolate one, of course.)
The vmware default when I said it was a Linux/SUSE
Hi All,
On a clean fresh install of oS10.3 done just 3 days ago, I get a notice
this morning that I had run out of disk space. Both / and /home in the
same partition, a 65GB ext3, freshly formatted. For some reason
/home/user/.xsession-errors had grown to about 48GB in size. I don't
have a clue
Hi,
I'm running OpenSuse 10.3 64bit on AMD 64x2. I was examining my
/var/log/messages log file and noticed a LOT (like one ever few
seconds!!!) of messages of the following:
Nov 12 20:23:54 orm7700a acpid: received event processor CPU0 0080
Nov 12 20:23:54 orm7700a acpid:
Anders Johansson;1325003 Wrote:
Please don't spread such rumours. Of course all the modifications are
open
sourced, and they are actively submitted upstream to openoffice.org as
well
As far as I know, it is even included in opensuse
Doesn't the Novell edition of Openoffice.org
Whenever I turn-on my computer, my newly installed OpenSuSE 10.3 is
prompting me to login (black and white screen) instead of the green
coloured KDE login screen. The only way I can do is to login with root
account and then key-in the command kdm, then the system will show me
the KDE login
On Sun November 11 2007 18:12, James Knott wrote:
I also wrote my own script quite a while ago. One thing it does, is
check to see if it can find my WiFi router. If so, it uses one
configuration. If not, it assumes it's away from home and uses
another. I guess this is another feature of
On Mon, 2007-11-12 at 09:11 -0700, Marcel Cox wrote:
Anders Johansson;1325003 Wrote:
Please don't spread such rumours. Of course all the modifications are
open
sourced, and they are actively submitted upstream to openoffice.org as
well
As far as I know, it is even included in
Claude Fuhrer schrieb:
Roger Oberholtzer wrote:
[...]
Do you remember which one that was? My java 1.6 no longer works. It did
for a bit and I could run, say, eclipse. But something messed it up and
I do not think the java itself is installed correct.
On my computer, I had to reset all
Jim Flanagan wrote:
For some reason /home/user/.xsession-errors had grown to about 48GB in size.
Maybe that was bug #338009, even though in this bug the file is not
_that_ big. See
https://bugzilla.novell.com/show_bug.cgi?id=338009 for more details.
Next time this happens, open a shell and
Thanks Masaru,
I would check this tonight from home and post results
Jose
Masaru Nomiya wrote:
Hello,
In the Message;
Subject: Re: [opensuse] x1600pro ATI and Suse10.3
Message-ID : [EMAIL PROTECTED]
Date Time: Sun, 11 Nov 2007 23:21:32 -0500
[Jose] == Jose [EMAIL
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Jim Flanagan wrote:
Hi All,
On a clean fresh install of oS10.3 done just 3 days ago, I get a notice
this morning that I had run out of disk space. Both / and /home in the
same partition, a 65GB ext3, freshly formatted. For some reason
Hi,
Yesterday I installed opensuse 10.3 w/KDE. I am loving it. I do have some
areas that I don't have configured correctly, and and hoping for some
direction. Today I am concentrating on the issue of
lirc.
I have a Phillips ehome remote, branded as the Media Center Edition
(mce_usb2). I have
On Mon November 12 2007 08:43, Carlos E. R. wrote:
Q3: Any direction where should I go?
Log-off your user, delete all files belonging to your user under
/tmp, then tell the system to delete /tmp files periodically or at
boottime or both (your choice).
To implement that the easiest is to go
This has probably been asked and answered numerous times, but the search
capability of the archives leaves MUCH to be desired. Why is it that the
DVD ISO on all of the mirrors only appears to be a small portion (105MB)
of the actual DVD?
Thanks,
--
kr
--
To unsubscribe, e-mail: [EMAIL
Markus Koßmann wrote:
Am Sonntag, 4. November 2007 schrieb Jim Flanagan:
Greetings,
Anyone know how to get an SMC 2862W-G USB wifi adapter working in
Opensuse 10.3? In yastnetwork devices it shows up as EZ Connect G
device (the name of the thing), but I can't get it to connect to my
router
List,
Version: 10.3
Sys: dual core, 4 GIG
I downloaded a few RPM's for a project I'm working on. Installed the
RPMs, all went okay, but when I went to preview the directories I
noticed some of the directories had no files in them, when they should
have. These directories were suppose to be
Jeff Mahoney wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Jim Flanagan wrote:
Hi All,
On a clean fresh install of oS10.3 done just 3 days ago, I get a notice
this morning that I had run out of disk space. Both / and /home in the
same partition, a 65GB ext3, freshly formatted. For
On Mon, 2007-11-12 at 16:30 +0100, Leen de Braal wrote:
Did you have enough RAM configured for your VM? Mine is 256 now, and it
runs, but maybe you need to take some more for the install (512).
Give Leen a cigar. (A chocolate one, of course.)
The vmware default when I said it was a
Mates,
This was probably answered before, but I couldn't find it on a quick
search. I have a dell optiplex GX280 and I just installed 4G of ram. The
Bios sees all 4G just fine, but when I look at the memory with free it
only shows 3G seen. Like:
[EMAIL PROTECTED]:~ free -tm
On Nov 12, 2007 3:33 PM, David C. Rankin [EMAIL PROTECTED] wrote:
Mates,
This was probably answered before, but I couldn't find it on a quick
search. I have a dell optiplex GX280 and I just installed 4G of ram. The
Bios sees all 4G just fine, but when I look at the memory with free it
On Monday 12 November 2007 10:33, David C. Rankin wrote:
Mates,
This was probably answered before, but I couldn't find it on a quick
search. I have a dell optiplex GX280 and I just installed 4G of ram.
The Bios sees all 4G just fine, but when I look at the memory with
free it only
Carlos F Lange wrote:
On Sun November 11 2007 18:12, James Knott wrote:
I also wrote my own script quite a while ago. One thing it does, is
check to see if it can find my WiFi router. If so, it uses one
configuration. If not, it assumes it's away from home and uses
another. I guess this
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
David C. Rankin wrote:
Mates,
This was probably answered before, but I couldn't find it on a quick
search. I have a dell optiplex GX280 and I just installed 4G of ram. The
Bios sees all 4G just fine, but when I look at the memory with free
On Sun, Nov 11, 2007 at 11:50:35AM -0700, Tom Patton wrote:
Since Sprint has published a set-up guide for LINUX, I'm considering
rewarding their simple acknowledgment of us by giving it a shot...gotta
be better than dial-up!
In the guide, they state that the maximum connection speed is
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
* Roger Oberholtzer [EMAIL PROTECTED] [11-12-07 03:01]:
I have a new issue with smart on opensuse 10.0: I cannot do an update,
install, or even a fix. It loads and updates the cache. But after it
prints Computing transaction..., the program hangs.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
* Mike.Friedrichs [EMAIL PROTECTED] [11-12-07 13:33]:
I downloaded a few RPM's for a project I'm working on. Installed the
RPMs, all went okay, but when I went to preview the directories I
noticed some of the directories had no files in them,
On Mon, 2007-11-12 at 12:04 -0600, Mike.Friedrichs wrote:
List,
Version: 10.3
Sys: dual core, 4 GIG
I downloaded a few RPM's for a project I'm working on. Installed the
RPMs, all went okay, but when I went to preview the directories I
noticed some of the directories had no files in
Hi Patrick,
It was purely subjective testing - engineers pulling CVS trees
complained of snail slow performance. We turned off bonding, and now we
have very fast performance. Not a scientific test, so I don't know if
posting a bug report is a helpful thing.
- Joel
Patrick Kirsch wrote:
I opened OOo-writer to prepare a document. To my surprise, my favorite
font (Arial, 12 point) was not in the font selection drop down box. I'm
(almost) positive that I installed the Microsoft core fonts during the
latest install. A search of the web turned up two web sites, each
offering a
I have a server that has SLES 9.3 installed on a Sunfire 4600. The
problem I'm having is that df is reporting incorrect results. Here is an
example:
/dev/sda6 10G -64Z 9.6G 101% /var
du -hs
372M.
Now, this has been going on for a while. Recently, syslog has been
stopping
On Monday 12 November 2007 19:04:11 Mike.Friedrichs wrote:
List,
Version: 10.3
Sys: dual core, 4 GIG
I downloaded a few RPM's for a project I'm working on. Installed the
RPMs, all went okay, but when I went to preview the directories I
noticed some of the directories had no files in them,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
[EMAIL PROTECTED] wrote:
I have a server that has SLES 9.3 installed on a Sunfire 4600. The
problem I'm having is that df is reporting incorrect results. Here is an
example:
/dev/sda6 10G -64Z 9.6G 101% /var
du -hs
372M.
Anders Johansson wrote:
On Monday 12 November 2007 19:18:10 K.R. Foley wrote:
This has probably been asked and answered numerous times, but the search
capability of the archives leaves MUCH to be desired. Why is it that the
DVD ISO on all of the mirrors only appears to be a small portion
On Monday 12 November 2007 20:48:15 [EMAIL PROTECTED] wrote:
I have a server that has SLES 9.3 installed on a Sunfire 4600. The
problem I'm having is that df is reporting incorrect results. Here is an
example:
/dev/sda6 10G -64Z 9.6G 101% /var
du -hs
372M.
Now, this
On Monday 12 November 2007 20:58:48 K.R. Foley wrote:
This is a new one on me. I am behind a firewall and going through a
proxy server. Using either the browser or wget, both report 110,876,672.
Using ftp it reports properly.
wget can definitely handle large files, so you should file a bug
Chris Arnold wrote:
We have a master DNS server that is running on windoze and it shuts down
at least once a day. We want to make one of our SLES10 SP1 servers a
backup/slave DNS so when the crappy primary DNS goes down, name
resolution still works using the SLES10 SP1 DNS. So, i go into
Aha! Thanks so much to David and Ben. Indeed I was unfolding (hence
the ribbon-like flattened viewports I kept seeing) the cube via
Ctrl-Alt-Down. Once I understood David's description about using
Ctrl-Alt-LeftMouse to initiate the rotation the cube by holding them
down continuously while grabbing
On Mon, 2007-11-12 at 21:05 +0100, Anders Johansson wrote:
On Monday 12 November 2007 20:58:48 K.R. Foley wrote:
This is a new one on me. I am behind a firewall and going through a
proxy server. Using either the browser or wget, both report 110,876,672.
Using ftp it reports properly.
Anders Johansson wrote:
On Monday 12 November 2007 19:04:11 Mike.Friedrichs wrote:
List,
Version: 10.3
Sys: dual core, 4 GIG
I downloaded a few RPM's for a project I'm working on. Installed the
RPMs, all went okay, but when I went to preview the directories I
noticed some of the
Sloan wrote:
Due to a legacy situation we have windows boxes as masters for simple
domains, and a sles server as the master for complex domains (e.g.
having different views), so we have a good combination of cases -
forward, slave, and master. But we've never used yast to set it up,
we've
On Monday 12 November 2007 21:35:59 Mike.Friedrichs wrote:
I am working on a RTEMS RTOS system. The rpms came from:
http://www.rtems.com/ftp/pub/rtems/linux/4.8/suse/10.3/i586/. The rpms
include the cross compiler, debugger, build tools for their RTOS
They have an example in there
Hello all,
I though I would ask here before I submit a bug report. Why after a log in
that my desktop starts in KDE and maybe an hour later, gnome is switched in
without my consect.
Is there a setting somewhere that I'm missing?
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
The Monday 2007-11-12 at 09:59 -0600, Jim Flanagan wrote:
Hi All,
On a clean fresh install of oS10.3 done just 3 days ago, I get a notice
this morning that I had run out of disk space. Both / and /home in the
same partition, a 65GB ext3, freshly
On Monday 12 November 2007 22:02:14 Keller, Damon A SPC MIL USA wrote:
Hello all,
I though I would ask here before I submit a bug report. Why after a log in
that my desktop starts in KDE and maybe an hour later, gnome is switched in
without my consect.
Is there a setting somewhere that I'm
Chris Arnold wrote:
Sloan wrote:
Due to a legacy situation we have windows boxes as masters for simple
domains, and a sles server as the master for complex domains (e.g.
having different views), so we have a good combination of cases -
forward, slave, and master. But we've never used yast
Anders Johansson wrote:
On Monday 12 November 2007 21:35:59 Mike.Friedrichs wrote:
I am working on a RTEMS RTOS system. The rpms came from:
http://www.rtems.com/ftp/pub/rtems/linux/4.8/suse/10.3/i586/. The rpms
include the cross compiler, debugger, build tools for their RTOS
They
Sloan wrote:
OK a quick example, with an imaginary domain called lexusespanol.com -
In named.conf add a stanza like this:
zone lexusespanol.com {
type slave;
file lexusespanol.com.db;
masters { 172.16.121.119; };
};
So we've specified the zone name
On Monday 12 November 2007 22:12:58 Mike.Friedrichs wrote:
Anders Johansson wrote:
On Monday 12 November 2007 21:35:59 Mike.Friedrichs wrote:
I am working on a RTEMS RTOS system. The rpms came from:
http://www.rtems.com/ftp/pub/rtems/linux/4.8/suse/10.3/i586/. The rpms
include the cross
Stefan Hundhammer wrote:
perl -p -i -e 's/oldtext/newtext/' *.html
/oldtext will be lines of html and /newtext will be lines of php. Will
perl still be able to do it and if so, do i need to escape some of the
code in oldtext and newtext? Example:
HTML the and
and
?php ;? does any of that
1 - 100 of 153 matches
Mail list logo
