Can anyone recommend a plugin I can use to control my SB3 from a HP
iPaq pda running windows mobile 5 ( I think)?
Just use the handheld webUI skin. http://server:9000/Handheld
___
plugins mailing list
plugins@lists.slimdevices.com
I have configured my morning alarm to play Sugercube as a Dynamic Playlist.
It works really well, except that it always seems to stop after a few songs
(around 6 tracks).
I can make a MusicIP playlist from the last track played from the Sugercube
dynamic playlist, and get 50 songs.
I have
Philip Meyer;397776 Wrote:
How do I debug this to see why it stops adding songs after a few
tracks?
Enable debug logging on Dynamic Playlist and SugarCube and post the log
after it stopped adding tracks. I think you will see the error in the
SugarCube log entries.
Dynamic Playlist asks
V1.2.3 should work except for similar artist radio stations.
I can't promise a date for a full fix for the issues, I've been a bit busy
recently!
James
--
NOTICE: If received in error, please destroy and notify sender.
Hi,
Or maybe even better the nokia skin.
http://server:9000/nokia770.
(altough it depends on the resolution of the smartphone. Just try it
out)
werner
--
transporter
transporter's Profile:
How i can install an aac+ Plugin on my SB Classic via the Squeeze
Network. i dont use a Slimserver.
Regards obraendl
--
obraendl
obraendl's Profile: http://forums.slimdevices.com/member.php?userid=23404
View this thread:
You can't - Squeezenetwork does not support plugins for transcoding.
--
bpa
bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806
View this thread: http://forums.slimdevices.com/showthread.php?t=36034
I've run SoftSqueeze on and off for some time without any issues, but
now I cannot get it to run at all: the simulated squeezebox display
reads Connection failed. Please check server settings. I've had a
look at the server settings in SlimServer but can't see anything to
change. Moreover both of
erland;397633 Wrote:
Could you try to run it with Custom Scan debug logging enabled and see
if you can see which steps that are executed at the end when mysqld
uses most CPU?
Sure, Ill do. But might have to wait until tonight, some other things
still on my list to do first
erland;397633
First of all: Thank you for this plugin. I am using the Shutdown to
SqueezeNetwork command. I have a SB3 and a Boom (always synchronized),
using SC on a Vista PC.
When I use above command with RC on either of both devices, that one
switches correctly to SN. Yet the other one states Shutdown to
hedgamahog;397844 Wrote:
When I use above command with RC on either of both devices, that one
switches correctly to SN. Yet the other one states Shutdown to
Squeezenetwork during the whole shutdown process of the PC.
Afterwards, it looses connection without connecting to SN.
Last time I
This is a great shame as it means you can no longer use the BBC streams
through AlienBBC as an alarm - which was the perfect use! :-(
Anybody know if the UK only mp3 streams suffer from the same problem?
--
lignumaqua
Ok, I had some time, so I cleared and rescanned my »real« library with
CustomScan. Here are the overall results:
- Scanning artist: CPU Load: Perl 80%, mysqld 5%
- Scanning album: CPU Load: Perl 80%, mysqld 5%
- Scanning track: CPU Load: Perl 50-80%, mysqld 0-15%
The whole scan took
You could try using the links that beebotron generate. I'm not sure
where they are found but they may suit. see
http://beebotron.org/public2/radio2.html
For example - the following seems to be Terry wogan on a Thursday.
rtsp://rmv8.bbc.net.uk/radio2coyopa/radio_2_-_thursday_0730.ra
--
bpa
bpa;397915 Wrote:
You could try using the links that beebotron generate. I'm not sure
where they are found but they may suit. see
http://beebotron.org/public2/radio2.html
For example - the following seems to be Terry wogan on a Thursday.
Same thing has happened here a couple of times, and I've resolved it by
reinstalling SoftSqueeze (using the link at the left bottom of
SqueezeCenter Home).
/Mats
--
MatsLarsson
MatsLarsson's Profile:
I was looking at another thread here...
http://forums.slimdevices.com/showthread.php?t=36034
and noticed one of bpa's checklist items was to ensure that AAC+
decoded stream is sent to SB3 as Flac or WAV.
I took a look at Settings/Advanced/File Types in my SC 7.2.1. It's not
clear to me how
SB cannot play AACplus so it has to be transcoded into a format that can
be played by the SB which is either Flac, MP3 or WAV.
The aacpmplayer.sh routine invokes mplayer using input from stdin. The
shell script is needed because mplayer cannot use stdin as a source and
also at the time of
Thanks James,
I know we all appreciate your efforts.
Do you know why it breaks every time Logitech releases a dot release of
Squeezecenter? Are they doing something strange in their minor updates?
Let us know and we can help express our concern. :)
I look forward to the Similar Artist fix.
dip;396870 Wrote:
In contrast, when I browse the created CustomBrowse album menu the
compilations are mixed within the regular albums.I just recognized that
this problem does not only exist on the
controller but also when browsing on a regular squeezebox.
Further, I noticed that each of the
In version 2.2 of the CustomBrowse plugin, I see the following added
feature:
Added possibility to play all tracks on an album in Controller
interface
Does anyone know what this means? I was looking for a feature where
hitting play on a song would add that song and the rest of the album to
the
Take a look at the Basic Settings for your player in the Web UI. There
is an option to Play Other Songs In Album. Maybe that is what you are
looking for.
--
Mike Meyer
'My Last.fm Page' (http://www.last.fm/user/malmeyer)
'PGAScores' (http://forums.slimdevices.com/showthread.php?t=47480)
Hi,
My configuration is the following:
PC with XP Pro SP3 running SC 7.3.2 in French, MusicInfo 4.3.7 -
Transporter wired.
I tried to reproduce the bug with the following steps:
1)The screensaver is in default mode (Basic settings menu of SC)
2)The font size is set to standard (Display menu
As of 1:40pm EST (Philadelphia) on 2/18/09, AlienBBC Radio 3 Listen
Again reports no programs found.
The Alternative Listen Again for Radio 3 does still list all the
programs, however.
--
jdavies
jdavies's Profile:
The Alternative Listen Again uses a different source and the Radio 3
menu is workgin OK for me now.
I have seen this version of no programs problem (the schedule
version is different) and I think it is due to caching or timing
rather than the actual web pages content but I find it hard to
Yes I have set this to play other songs but it still doesn't do that
for CustomBrowse menus, only the original ones.
--
milowg
milowg's Profile: http://forums.slimdevices.com/member.php?userid=20625
View this thread:
Ah, gotcha. I'll defer to Erland then. :)
--
Mike Meyer
'My Last.fm Page' (http://www.last.fm/user/malmeyer)
'PGAScores' (http://forums.slimdevices.com/showthread.php?t=47480)
'CollegeHockey' (http://forums.slimdevices.com/showthread.php?t=55731)
(SuperDateTime Add-ons)
Hi
I installed iplayer tonight and its working fine (and its great!) for
most play again except for some streams it is silent. That is the
second count but there is no sound. I can press pause/play or back and
the second stop/start or go back to zero but still no sound.
Then I can choose other
Donwload the new version 1.2.3 of SqueezeScrobber
http://sourceforge.net/project/showfiles.php?group_id=105780package_id=247364
--
avour
*ma SB3 Classic*:
http://forums.slimdevices.com/showthread.php?p=254271#post254271
*blog perso de ma config*:
Glad to hear that you are interested in pursuing this. I gathered from
your last post that we may have reached a dead end, but obviously not.
Don't to worry about the pace! I would love to get this plugin working
on my kit. To that end, please find attached two zipped files
containing the info
I've uploaded a new v1.2.4 that should fix any stations still not
working.
Download from
https://sourceforge.net/project/showfiles.php?group_id=105780package_id=247364release_id=648496
or just check the Extension Downloader for the new version.
James
--
James
sugress;397647 Wrote:
btw. i get it to work just great in vista.
the message i get when i try to open scpowertool.exe in xp is:
This application has failed to start bacause the application
configuration is incorrect. Reinstalling the application may fix these
problems.
any idea?
hedgamahog;397844 Wrote:
First of all: Thank you for this plugin. I am using the Shutdown to
SqueezeNetwork command. I have a SB3 and a Boom (always synchronized),
using SC on a Vista PC.
When I use above command with RC on either of both devices, that one
switches correctly to SN. Yet
Need to check further but in the recent logs it looks like
dshow-amtuner-mode is set to 1 whereas in TunerPlay I set it to 2
according to VLC help
Code:
--dshow-amtuner-mode={0 (Default), 1 (TV), 2 (FM radio), 4 (AM radio), 8
(DSS)}
AM Tuner mode. Can be one of
The radio timeout setting is 5.
As for what I was doing before this happened, I was checking the
AlienBBC/Radio 3 - schedule listing -- and that said no programs
found and then when I returned to the regular AlienBBC/Radio 3
listing it then said no programs found. Before I checked the
The no programs when looking at a Schedule was due to a change in BBC
html. I am currently testing a new release to fix this bug.
The URL cache is kept in directory FileCache. Stop SC and delete the
directory FileCache in the SC Cache directory. Look in Webui
Settings/Information for location
OK -- I deleted the entire FileCache folder (and all subfolders) and
stopped and restarted SqueezeCenter -- and it worked! I now have all
the listings back that I had earlier this morning under AlienBBC/Radio
3. (The listings are still not complete; for example, there is only
one Breakfast
The breakfast issue is new to me. Itmaybe part of the no prgrams
problem. I'll check it out.
--
bpa
bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806
View this thread:
Changed all three instances of :dshow-amtuner-mode=2 to
:dshow-amtuner-mode=1 and still had no audio. I will leave them as
=1 unless instructed otherwise.
Please confirm if the next entry (dshow-audio-channels) after
:dshow-amtuner-mode equals 1 or 3.
Also, just a reminder to insure that our
Hi, I purchased iPeng v. 1.0.5 yesterday and it was working fine until
this evening when I used it to log onto Archive.org to hear some live
music. Now, iPeng crashes every time I try to launch it. I get the
opening splash screen, and then two blank screens in quick succession
and then I am
Please confirm if the next entry (dshow-audio-channels) after
:dshow-amtuner-mode equals 1 or 3.
Neither dshow-audio-channels should be 2 - it is number of audio
channels (i.e. Left and Right).
--
bpa
bpa's
This configuration leads to the display problems showed in the photos
attached.
I think what you're seeing is simply a misconfigured screensaver. This
might be due to bad defaults the plugin is using. I'll have to check this.
Please go to the MIS settings and re-configure that large line to
42 matches
Mail list logo
