OK, done. I recompiled again with the same results and you can
access the log here:
http://www.reedelectronics.com/steve/qmail.log
Thanks.
>
> 3) Post /tmp/qmail.log to a website for further review, since
you're
>obviously not providing enough information here.
>
> --Adam
>
On Wed, Jun 27, 2001 at 01:09:17PM +1200, Steve Reed wrote:
> OK, done. I recompiled again with the same results and you can
> access the log here:
>
> http://www.reedelectronics.com/steve/qmail.log
Did you read Charles' mail? The last few lines of the log should've told
you exactly what went
I'm trying to head towards a setup with:
qmail/qmail-pop3/courier-imap/vmailmgr/ldap/squirrelmail
(1) I've been going over the life with qmail-ldap documentation and would
like to know if I am assuming correctly that this documentation assumes that
for the Linux 7.0 host:
1) openssl
looks like you haven't got the "nroff" program for extracting or something
the man files
take a look on your distribution CD's or try this source
http://sunsite.ics.forth.gr/sunsite/linux/sunsite_archive/utils/text/nroffsrc.tar.Z
[ found on the fast with google :) ]
At 23:09 28.06.2001, Steve
On Sun, 1 Jul 2001, Leonardo Quirini wrote:
>Hi everyone, i have a question: on my laptop i've installed qmail, and i
>want to configure it for this scenario: i can use a ppp connection (at
>home) and a ethernet connection (at the university). The mail servers
>are obiovously di
due to the 10 hours of downtime(or
it was just coincidence).
I have noticed that if I do a "qmail stop" and then a "qmail start", about
20 successful SMTP connections immediately come in, and then even though
qmail is still running, no more connections can get thru. If I leave i
Hello,
I am using the .qmail-file to forward messages to another email-address.
But I want to keep the mails in original Maildir also.
My .qmail-file:
[EMAIL PROTECTED]
./Maildir/
Postmaster receives following error:
Hi. This is the qmail-send program at mydomain.com
I'm afraid I wasn&#
On Tue, Jul 03, 2001 at 01:34:18PM -0500, Jared Hoskinson wrote:
> /service/qmail-send: up (pid 27094) 0 seconds
That's the problem, qmail-send isn't even running.
> > qmial-start ./Maildir/
> >alert: cannot start: unable to open mutex
Go back to your source dir a
Jared Hoskinson <[EMAIL PROTECTED]> wrote:
>
> I have installed qmail from source on a RH 7 box. I followed lwq which was
> very helpful.
Unfortunately, you appear to not have followed it very well.
> Here is my problem, qmail starts ok add allows connections on port 25
--
Hello all:
I followed LWQ's directions for setting up qmail-pop3d:
it wont start up and i get this in my messages log:
Jul 3 10:37:44 mckenna qmail: Starting qmail: done
Jul 3 10:37:44 mckenna qmail: qmail-pop3d service not running
Jul 3 10:37:44 mckenna qmail: /etc/rc3.d/S80
Leonardo Quirini <[EMAIL PROTECTED]> wrote:
> i have a problem: i want fetchmail to deliver my mail from a pop server to
> my computer. Obiovously i have installe Qmail here and my mail format is
> Maildir. I've read in an HOWTO to add this line to my .fetchmailrc:
>
>
Symptoms:
>
> Lag when sending and receiving mail
Possibly the mode/etc of the trigger is incorrect. Stop qmail, do "make setup
check" from the qmail source directory again.
> Mail sent from machine does not seem to arrive at destination, even though
> an 'accepted' m
GIC MLs <[EMAIL PROTECTED]> wrote:
> >
> > > GIC MLs <[EMAIL PROTECTED]> wrote:
> >
> > > > Symptoms:
> > > >
> > > > Lag when sending and receiving mail
> > >
> > > Possibly the mode/etc of the trigger is in
Hi!
I'm using bruce guenter's qmail RPM for some time now.
I'd like to know if it's possible to chmod 750 the directories under
/etc/qmail so that no one can go in there and check my configuration files,
without disrupting qmail's functioning. Here are the directories a
Thanks for the help.
> > > > Possibly the mode/etc of the trigger is incorrect. Stop qmail, do
"make
> > > > setup check" from the qmail source directory again.
> > >
> > > Actually, I am glad you mentioned this, because I have been looking
; It looks like somehow a Maildir delivery instruction is being confused for
> > a forwarding directive -- I don't quite understand how this is happening.
> Ok, at least I'm not the only one then. :-)
> Again, this was all working "perfectly" until I hard-rebooted...
On Wed, Jul 04, 2001 at 02:38:18PM +0800, Brett Leeder wrote:
> I, as postmaster, get a LOT of these bounces and because of the
> formatting characters in the subject line etc (this is my assumption
> anyway), my mail client (Netscape), falls in a heap and is unable to
> process the received mail,
Chris Woods <[EMAIL PROTECTED]> wrote:
>
> I have finished my qmail install follow a HOWTO from Adam McKenna but I
> can't find any logs when testing.
This depends entirely on how you configured qmail. If you don't know how you
configured qmail to log, do:
find /var
And if that didn't return anything
Chris.
On Wed, Jul 04, 2001 at 05:41:59PM -0600, Charles Cazabon wrote:
> Chris Woods <[EMAIL PROTECTED]> wrote:
> >
> > I have finished my qmail install follow a HOWTO from Adam McKenna but I
> > can't find any
harles Cazabon wrote:
> > Chris Woods <[EMAIL PROTECTED]> wrote:
> > >
> > > I have finished my qmail install follow a HOWTO from Adam McKenna but I
> > > can't find any logs when testing.
> >
> > This depends entirely on how you
Hello again,
- Original Message -
From: "Charles Cazabon" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, July 05, 2001 4:00 AM
Subject: Re: qmail-remote
> > > Post an exact copy of the script you use to start qmail -- the one
that
> > &
- Original Message -
From: "Charles Cazabon" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, July 05, 2001 4:00 AM
Subject: Re: qmail-remote
> > > Post an exact copy of the script you use to start qmail -- the one
that
> > > actually
lists <[EMAIL PROTECTED]> wrote:
> chicken# cat /var/qmail/control/defaultdelivery
> ./Maildir/
Okay, that looks fine.
> Last night I had messed up my queue by removing messages without bringing
> down qmail-send and qmail-smtpd first (DOH!!). I fixed the queue with
> qu
phase wrote:
>
> I currently have qmail logging via syslog to maillog. I would like to
> change the log files to log to the /var/log/qmail dir.
>
> This is my rc file.
>
> #!/bin/sh
> exec env - PATH="/var/qmail/bin:$PATH" \
> qmail-start ./Mailbox spl
phase <[EMAIL PROTECTED]> wrote:
> I currently have qmail logging via syslog to maillog. I would like to
> change the log files to log to the /var/log/qmail dir.
[...]
> I've found one example but it uses cyclog which I can't find in the
> latest daemontools whe
Do I need to install
a popper inorder to pop mail from a windows machine on/outside the local
network? If so is qpopper a good one?
Thanks.
Chris
me) and all the other qmail-remotes were enclosed in
> brackets [qmail-remote]. Not knowing what this was, I did a 'killall
> -HUP qmail-remote'. The 'unclogged' the remote process and it started
> delivering the messages that were on hold. Can anyone tell me what
Me again...
Now we're getting this in the log files:
@40003b44845219ec0e14 status: local 0/10 remote 3/20 exitasap
@40003b44845219ec73a4 delivery 760867: deferral: qmail-remote_crashed./
@40003b44845219ece8d4 status: local 0/10 remote 2/20 exitasap
@40003b44845219ed524c del
I'have installed qmail on my system, but I don't know if
is necesary to create a .qmail-default file, because I
don't clearly understand the meaning of this file.
Should I create it? and what should I write there?
~edu
The problem is:
I've a public Ip address that is the MX record
of my domain.
the port 25 of this public ip is natted to the port
25 of a private address (192.168.5.2), on this server I've qmail of
course.
After that I've a Microsoft Exchange Server
(192.168.5.4) that hol
hi , do you know if there are some HOW TO'S or similar for analog ???, the
man pages are difficult,
thanks
On Thu, Jul 12, 2001 at 06:01:10PM -0300, Renato Dobelin wrote:
> Olá for all,
> I looked for of some forms to prevent leaving the qmail with the opened Relay, used
>patch of the Mrs. Brisby's to legalize the together smtp with the RPM of the qmail of
>Bruce Guenter (obviousl
My logs are filling up with these errors:
starting delivery 14152: msg 582933 to remote [EMAIL PROTECTED]
status: local 0/10 remote 394/400
delivery 14150: deferral: qmail-spawn_unable_to_open_message._(#4.3.0)/
status: local 0/10 remote 393/400
starting delivery 14153: msg 582933 to remote
hi all
I'm quite new in the qmail mta and my question may be stupid or something
for what I excuse, but here my problem is:
I've just installed the qmail package on my linux (2.2.16) slackware 7.1
exactly following the instructions in the INSTALL file but the qmail-smtpd
daemon is not
At 13:57 16.07.2001 +0200, Webmaster Sports-wear.de wrote:
>I have running Qmail for 2 weeks without problems, but last Friday I get
>errors.
>Here is my Log.
>
><[EMAIL PROTECTED]>:
>62.157.196.171 does not like recipient.
>Remote host said: 550 relaying to <[E
On Mon, Jul 16, 2001 at 01:57:00PM +0200, Webmaster Sports-wear.de wrote:
> I have running Qmail for 2 weeks without problems, but last Friday I get
> errors.
> Here is my Log.
>
> <[EMAIL PROTECTED]>:
> 62.157.196.171 does not like recipient.
> Remote host sa
ter Sports-wear.de wrote:
>I have running Qmail for 2 weeks without problems, but last Friday I get
>errors.
>Here is my Log.
>
><[EMAIL PROTECTED]>:
>62.157.196.171 does not like recipient.
>Remote host said: 550 relaying to <[EMAIL PROTECTED]> prohibited by
You wrote:
> ><[EMAIL PROTECTED]>:
> >62.157.196.171 does not like recipient.
> >Remote host said: 550 relaying to <[EMAIL PROTECTED]> prohibited by
> >administrator Giving up on 62.157.196.171.
> [...] thing you can do,
> is try to send an email to [EMAIL PROTECTED], telling him about his
> prob
Hi All,
I was wondering, is there a way to make a reply to a
message sent from sqwebmail not show the username@FQDN but
rather username@domain
example: [EMAIL PROTECTED] is what comes up now in
response to a reply in a MUA, but I want it to be just
[EMAIL PROTECTED] (where bar.c
On Mon, Jul 16, 2001 at 04:48:37PM -0700, Hank Wethington wrote:
[ran tests on qmail, wants insight into the results]
> 1)The remote STMP server seems to allow remote users to
> send mail anonymously by providing a too long argument
> to the HELO command (more than 1024 chars).
>
&g
On Tuesday 17 July 2001 06:28, you wrote:
> On Mon, Jul 16, 2001 at 04:48:37PM -0700, Hank Wethington wrote:
> [ran tests on qmail, wants insight into the results]
>
> > 1)The remote STMP server seems to allow remote users to
> > send mail anonymously by providing a too lon
Thanks for the response back. I thought about the subject after I sent it
and thought to myself, "they're gonna think you're a troll." Oh well, I'm
glad someone looked at it.
Having control over a number of qmail installations, the scan results were a
little disconce
Hey all...
I'm curious. If you have a postmaster-type account called virtuals and all messages
go there, then re-routed from
there using .qmail files how would you do something like this:
(in virtualdomains)
isp1.net:virtuals-isp1
(in /home/virtuals)
(.qmail-isp1-user1)
user1
(.qmail
Can there be, in the normal flow of qmail, multiple
instances of qmail-send running at the same time (?) because multithreaded
it's not, and I haven't seen any locking mechanisms for the ressources
qmail-send accesses directly.
Thanks,
Dan
Hello,
My qmail installation lies in /var/qmail
currently the permissions are --
rwxr-xr-xrootqmail/var/qmail
The moment i remove rx for others my pop stops working.
(for authentication i use checklocalpasswd with /etc/poppasswd).
I have tried a lot of permutations / combinations with
On Fri, Jul 20, 2001 at 10:47:08AM -0400, Steve wrote:
> Hi,
>
> I need to build a script that runs from a .qmail file and does a few
> side tasks but doesn't interfere with the normal mail delivery. This is
> to send an email or pager notification when mail arrives
are and what the output options are
Either you haven't looked hard enough, or you didn't get enough sleep
before you started. Two man pages included with qmail itself document
everything you need to know[*]: dot-qmail(5) & qmail-command(8).
[*] Except how to write scripts. 8-)
--
Hi Steve,
i am writing mail messages to a mysql database from .qmail files.
the file looks like this:
|/bin/cat $1 | myperlscript.pl $SENDER
$1 is the whole mail-message and $SENDER is, i guess you know.
regards,
philipp
Steve writes:
> Hi,
>
> I need to build a script
On Fri, Jul 20, 2001 at 03:46:07PM +, Philipp Steinkrüger wrote:
> |/bin/cat $1 | myperlscript.pl $SENDER
This is a Truly Useless Use Of cat (ISTR someone collecting these things
in one DJB-run list or another 8-). It's equivalent to:
|myperlscript.pl $SENDER
"man qmail-co
On Fri, Jul 20, 2001 at 03:46:07PM +, Philipp Steinkrüger wrote:
> |/bin/cat $1 | myperlscript.pl $SENDER
>
> $1 is the whole mail-message and $SENDER is, i guess you know.
Nonsense. The mail gets pumped in on STDIN, and fortunately for you cat
passes it to its STDOUT. $1 is empty. So your
On Sat, Jul 21, 2001 at 06:40:19PM +0700, Danar Prabandaru wrote:
> Does anyone know what each qmail loglevel does?
> I've tried loglevel 0 and loglevel 5 and know the different. But I can't
> see the different of loglevel 1-4.
Assuming you're talking about syslog prior
Hi,
I'm newbie using qmail and I have a question about qmail with maildrop.
Do I need to replace my original qmail-queue binary using qmail-filter
patch to use maildrop?
The user lookup will still to be done by qmail or that will be done by
maildrop?
Is
Hi Joy,
The new script can be found on this link;
Make sure that you add the -i flags on all grep commands
so that it will not miss uppercase characters.
http://www.ornl.gov/its/archives/mailing-lists/qmail/2001/03/msg01041.html
The script includes the instructions on how to use it. Please
I seem to be missing something. The docs say that I can use a line in inetd.conf like
this one:
qmail-popup myhost.net checkpoppasswd qmail-pop3d /var/qmail/maildir
But this syntax is invalid. It's missing componants that inetd needs, like
'wait/nowait'. Does anybody have som
Hello tveryone. last four months, i have a very strange problem with
qmail. every one/two week i look at server this situation:
---ps auxw--extract
root 8093 0.0 0.1 1056 280 ?SJul24 0:00
/var/qmail/bin/qmail-popup ratel.ru /home/vpop
mail/bin
what does the logs say..
>
> when i try to telnet:
> Trying 127.0.0.1...
> Connected to homer.rixtele.com.
> Escape character is '^]'.
> Connection closed by foreign host.
--
Dushyanth Harinath
Archean Infotech Limited
Ph No:091-040-3228666,6570704,3228674
http://www.archeanit.com
---
Hi
They does'nt say anything, /var/log/qmail/qmail-pop3d/current is empty...
- Original Message -
From: "Dushyanth Harinath" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, July 26, 2001 11:05 AM
Subject: Re: qmail-pop3d
> what does the logs s
did u follow lifewithqmail.org ..there must be something wrong in the start
up script of qmail-pop3d
regards
dushyanth
> Hi
> They does'nt say anything, /var/log/qmail/qmail-pop3d/current is
> empty...
>
> - Original Message -
> From: "Dushyanth Harina
Hi,
It looks like you are trying to use the /var/qmail/supervise/qmail-smtpd/run script ?
tray this instead.
#!/bin/sh
exec /usr/local/bin/softlimit -m 200 \
/usr/local/bin/tcpserver -v -R -H -l 0 0 110 /var/qmail/bin/qmail-popup \
homer.rixtele.com /usr/local/vpopmail/bin/vchkpw
worked fine!
thanks alot!
Regards
Joel
- Original Message -
From: "Per-fredrik Pollnow (EPK)" <[EMAIL PROTECTED]>
To: "'Joel Aasma'" <[EMAIL PROTECTED]>
Cc: "Qmail Mailing list (E-mail)" <[EMAIL PROTECTED]>
Sent: Thursday, July
hi again
darn! it almost worked fine :/
The only thing is that when i do a /etc/init.d/qmail stop , pop3 is'nt
stopped.
here is my /etc/init.d/qmail script:
#!/bin/sh
# For Red Hat chkconfig
# chkconfig: - 30 80
# description: the qmail MTA
PATH=/var/qmail/bin:/bin:/usr/bin:/usr/local/bin
Hi all,
I am looking for some pointer to Qmail API and related documentation.
Any help will be highly appriciated.
thanks and regards,
Manoj Kumar Rana.
Dear Friend
First let me introduce my self i am sunil from india and
i am working as a trainee linux server administrator
I am working on suse 7.1
I installed qmail-1.3 with vpopmail and sqwebmail sucessfullyt
their are not 200 virtual domains on the mail server
i also installed the qmail
Hello,
I successfully installed qmail-1.03+patches-18 +
supervise-scripts + relay-ctrl + ucspi-tcp/unix +
vmailmgr from Bruce Guenter's RPM sources. And
also oMail-admin and oWebMail from Olivier
Mueller.
The purpose of the mail server is to host only
virtual domains mailboxes, fo
Hi,
I have been trying to use stunnel with qmail-smtp but I don't get it to work, maybe
someone have some suggestions how to do or where to find information about using
stunnel with smtpd..
I have been trying this in some desperate moments to get it to work(and some other
t
how can I setup a mailfilter (in & out) on my qmail server ?
I'd like my server to filter all mails by keyword.
thanx
Hi all,
my Qmail suddenly stopped working. I didn't change any of the conf files
recently.
The services are running, but whenever I try to access POP or SMTP, just
doing a Telnet to them it takes more than one minute to connect.
I've checked all the logs provided by supervise b
Does anyone have documentation on how to setup Qmail to work with SSH ???
I'm currently using Qmail+vpopmail
Any help would be appreciated..
Dave Lewis
Hi,
I just build and set up qmail for the first time (according to the
installation description in Life with qmail) on a Solaris 5.8 box.
I tried to start qmail by invoking
qmail-start ./Mailbox splogger qmail
and nothing at all did happen. No stderr/stdout no syslog, no processes
running
Hi there
1. can I set mail quota per user or is it accress the bord (the same for
all mailbox)
2. how do I set this up ? is there a how to ?
--
Thank You
Jonathan X Peers
--
Tel: 011 463-1937 Fax: 011 706-1084 Cell: 08
First of all, you posted this twice, after a seven minute wait. If
you're that impatient, hire a qmail consultant.
Jonathan X Peers <[EMAIL PROTECTED]> wrote:
>
> 1. can I set mail quota per user or is it accress the bord (the same for
> all mailbox)
For local users, use
for help with that. For virtual domains,
> your virtual domain manager (if using one) may have this feature.
>
Qmail with LDAP also has integrated support for this but you have to put
all your users
into an LDAP database. WWW site for this is at http://www.nrg4u.com/
Qmail works very well for me
Hi my name is Andre, I'm using qmail for a long time in the
same machine, when I start using qmail, sometimes it seems to stop work, so
I run qmail-stop an qmail-start again and it delivery many messages that are
in it's message spool, nowadays, my qmail starts a q
[Don't remember if I've already posted this; sorry if it's a repeat.]
Trying to run qmail with Maildir on a Slackware with AFS. The AFS is
installed and runs properly. Users' home volumes and Maildir are on AFS.
Qmail is generating temporary delivery errors; the mail never g
Jonathan X Peers writes:
> I am tring to install qmail
> and I am here in the INSTALL doc ... as i run the following I get this
> error can some point me in the right direction . PLEASE
>
> ---
> 8. Copy /var/qmail/boot/home (or proc
Seby <[EMAIL PROTECTED]> wrote:
>
> How can i make this work fine, i don't want procmail to write
> there how can i disable this behavior...
>
> success: procmail:_Couldn't_create_"/var/spool/mail/linux"/did_0+0+1/
Try asking on a procmail list, or see the procmail documentation.
Charles
--
-
On Mon, Aug 06, 2001 at 12:00:43PM +0530, Himanshu Kulkarni wrote:
> Hi All
>
> I am getting qmail-spawn_unable_to_fork._ error on my qmail server
This looks like a ressource limit issue. man ulimit, upper -n and -p.
--
* Henning Brauer, [EMAIL PROTECTED], http://ww
Hi,
I'm running qmail with the daemontools and right now
qmail and tcpserver are logging through multilog.
But now I want them to log through splogger,
because I'm used to have everything, belonging to
mail in one logfile. With multilog it's not possible
to write to one logf
The message archives have periodically mentioned going to qmail.org to find
support for Delivery Status Notifications (various 189x RFCs), but I
haven't actually found anything there. Does such a patch (or patches)
exist, and if so, where can I find them? It's quite possible I'm
overlooking it a
that they start
to fill the queue up pretty fast. Now
this isn’t that big of a problem anymore since I raised our connection
limit way the hell up there. But I have
messages that are getting stuck in the queue sometimes for more than 3
weeks. I have /var/qmail/control/queuelifetime
set to 345600
16:55:10.613655500 status: local 0/100 remote 1/100
2001-08-09 16:55:10.618145500 delivery 7: deferral: qmail-remote_crashed./
2001-08-09 16:55:10.618697500 status: local 0/100 remote 0/100
I've patched qmail with a few patches, to have SMTP_AUTH, QMTP, Spamcontrol ...
and it compiled
Hey folks.
So, more questions. Always, eh.
I've got a script that uses the qmail-queue patch that scans and
logs/drops/saves/rejects mail based on content..
What I'm wondering is if there is a way I can change the "message" that
is sent when various exit codes are recieve
I'm having some problems sending e-mail from within a perl program
using qmail.
Can someone tell me how I can easily send and receive mails in perl
using qmail. I'm trying and trying but nothing works.
Qmail works perfectly.
It should be nice to have some perl-code which does thi
Hi There,
I am new in qmail and want to migrate qmail with security purposes
but I want to know how to deal with virus, worms, etc.
It is possible to configure qmail with some tools
which check the contents of mail, attached docs, etc.
All my server are Linux powered and all clients are Win2k
On Mon, Aug 13, 2001 at 11:42:25AM -0400, qmail wrote:
> After I test the qmail-smtpd and qmail-send is ok,it seems to me ok.
> I try to install qmail-pop3d and start this service.
> I add the run script in /var/qmail/supervise/qmail-pop3d
> I use the method to test the checkpasswd
Hello Guys,
I need to change the time of deferred messages in qmail. My server is =
very busy and I need retry to send every 15 minutes the messages.
How and where I can change in the source code to make this?
Thankz a lot.
On 14 Aug 2001 02:47:18 +0200,
Craig Spiers <[EMAIL PROTECTED]> wrote:
> is there any way to make qmail-scanner leave an email it has been scanned
> allready?
You do not want to do this, because between two runs of the qmail-scanner
is one .qmail file, where it is very simple to
HELLO!
I have installed qmail and have launched the 'instcheck'
program.
'instcheck' printed the following messages:
[root@timsat-srv2 qmail]# ./bin/instcheck
instcheck: warning: /var/qmail/control has wrong owner
instcheck: warning: /var/qmail/users has wrong owner
inst
Can Qmail Works without inetd (in FreeBSD 3.5) and without others (such as
tcpserver, etc) ?
thx you
--sur--
We are currently using qmail 1.03 on a Sun E450 running Solaris 8. We
are having a problem with mail taking a very long time to be delivered
locally (sometimes in excess of 6 or 8 hours). The load on the box isn't
that bad at all, it just seems that qmail isn't sending out the mail i
Hello.
I have recently installed Qmail on an Alpha box for my boss. I got it to
send a simulated 100K message per hour through a dirty benchmark I wrote. My
boss wants more than that. I believe that the slow up is in qmail-inject. Is
there any way to make qmail-inject faster or bypass it totally
Does anyone know what specifically is meant by qmail-qread when it lists a
message as 'bouncing'? Does it mean that the actual message is a bounce
message? Or that one of the recipients bounced? Or something else
entirely?
Thanks,
Ben
--
The spectre of a polity controlled by th
I have the following line in /etc/inetd.conf:
smtp stream tcp nowait qmaild /usr/sbin/tcpd /var/qmail/bin/tcp-env
/usr/local/bin/rblsmtpd /var/qmail/bin/qmail-smtpd
I'm getting oodles of the following errors in my logs:
Jul 3 14:12:12 cyrix inetd[810]: pid 31351: exit status 1
Jul 3 14:
Hi,
Installed qmail based on instructions in Life With qmail, by Dave
Sill...
Upon starting qmail, I get a looping error as svscan attempts to
acquire these two directories, returning this error:
supervise: fatal: unable to acquire qmail-send/supervise/lock:
temporary failure
supervise
Dennis Robertson writes:
> Firstly as user when I open a term I get the message:
> env: qmail-start: Permission denied.
> I have followed both LWQ and the how-to and have checked permissions
> without finding what is wrong.
> Secondly, when I open a term I get a number like [1] 2
Dennis Robertson writes:
> Paul Jarc wrote:
> > /var/qmail/rc should be run as part of *system* startup, not user
> > login.
>
> Thanks. I'm going to uninstall qmail and try again. Where should
> the command be?
You probably don't need to reinstall. Just rem
Hi All,
I have Qmail installed in Red Hat 6.2 and it works fine, but we need to authenticate users with Oracle.
I have downloaded vpopmail package v4.8.4 but it does not seem to compile, because I think this
package has Oracle support. Does anybody know how to compile vpopmail and then
http://www.amazon.com/exec/obidos/ASIN/0672319454/qid%3D962246891/sr%3D1-2/0
02-4056617-0867210
anyone notice the above?
mike.
___
Why pay for something you could get for free?
NetZero provides FREE Internet Access and Email
http://www.netzero.net/dow
RedHat 6 box, I have /etc/rc.d/rc[235].d/S40qmail symlinked to
> ../init.d/qmail, which contains:
>
> paul
Paul,
Thanks. I remembered how I did it the first time (luckily, not all brain cells
are dead). I removed the offending .bashrc script and used tksysv to set up
qmail
in the app
Hi !
I installed newest qmail with rpm installation, and tried to send a mail
to me with pine, i didnt get that mail.. nothing in /Maildir and log
doesnt say anything, anybody can help me ?
-simo lakka
[EMAIL PROTECTED]
801 - 900 of 3624 matches
Mail list logo
