Peter B. West wrote:
Bill,
This is getting a bit confused. You say you have just installed a new
disk, yet you also say you want to reduce a 60Gb /var partition. If you
are installing a new disk, you can decide at the outset how big a /var
partition you want. I would go back to the
Bill,
This is getting a bit confused. You say you have just installed a new
disk, yet you also say you want to reduce a 60Gb /var partition. If you
are installing a new disk, you can decide at the outset how big a /var
partition you want. I would go back to the beginning, decide how big I
At 08:16 10/22/2003, you wrote:
# cp -prx /var/* /user
FYI, I do this with "rsync -av /var/* /user/"
Note the trailing slash on user, so it puts all those things _inside_ the
directory. The "-a" for archive on rsync does a lot, including preserve
ownership and permissions.
--
Rodolfo J. Paiz
[E
mv /var /var.old
>> mv /user /var
>> mv /var.old /user
>>
>> Chris
>>
>>
>>
>
> I also tried used parted to copy the filesystem, but parted didn't work.
> I'm guessing it was expecting an ext2 filesystem, when it was actually
> an ext3
Chris Purcell wrote:
Bill Tangren said:
Hello all,
I know this has been addressed on this list before, but I can't seem to
find it in the archives. If someone can point it out, I would be very
appreciative.
My /var partition is nearly full. I installed a new hard disk, used
fdisk to partiti
Rename the folders using mv like below. You should (optionally) also
change the labels using the command you mentioned above. Your /etc/fstab
file can contain labels or the partition numbers, either will work fine.
>> mv /var /var.old
>> mv /user /var
>> mv /var.old /user
Chris
On Wed, 2003-10-22 at 10:16, Bill Tangren wrote:
> Hello all,
>
> I know this has been addressed on this list before, but I can't seem to
> find it in the archives. If someone can point it out, I would be very
> appreciative.
>
> My /var partition is nearly full. I
Chris Purcell wrote:
I would boot into rescue (or single user) mode and use find/cpio to copy
/var/ to /user/.
find /var -xdev | cpio -pmduv /user
I'll use this, thanks.
...and then just rename them and modify your fstab file.
This is the part I don't understand. Is this done simply by changing t
Bill Tangren said:
> Hello all,
>
> I know this has been addressed on this list before, but I can't seem to
> find it in the archives. If someone can point it out, I would be very
> appreciative.
>
> My /var partition is nearly full. I installed a new hard disk, used
Hello all,
I know this has been addressed on this list before, but I can't seem to
find it in the archives. If someone can point it out, I would be very
appreciative.
My /var partition is nearly full. I installed a new hard disk, used
fdisk to partition it. I then used mke2fs to make an
unable to access that drive. It
was never a problem before. As near as I can tell, the partition table has
been lost/destroyed - the data appears to be intact.
Now, purely as an exercise (I have backups), I want to try an recover the
disk and its data. So far I have only tried to rebuild the partition
unable to access that drive. It
was never a problem before. As near as I can tell, the partition table has
been lost/destroyed - the data appears to be intact.
Now, purely as an exercise (I have backups), I want to try an recover the
disk and its data. So far I have only tried to rebuild the partition
t: Tuesday, October 14, 2003 5:41 AM
Subject: Re: partition check error at boot time
On Mon, Oct 13, 2003 at 01:44:40PM +0800, Daniel Tan wrote:
> try installing kernels using -ivh instead of -Fvh next time
>
For us newbies, why wouldn't you use -Uvh?
up2date seems to handle this stu
On Mon, Oct 13, 2003 at 01:44:40PM +0800, Daniel Tan wrote:
> try installing kernels using -ivh instead of -Fvh next time
>
For us newbies, why wouldn't you use -Uvh?
up2date seems to handle this stuff pretty gracefully, so I've not messed w/ just
changing the kernel.
Thanx,
Earl
--
redhat-
try installing kernels using -ivh instead of -Fvh next time
- Original Message -
From: "Allen Wayne Best" <[EMAIL PROTECTED]>
To: "Red Hat Mailing List" <[EMAIL PROTECTED]>
Sent: Saturday, October 11, 2003 7:47 AM
Subject: partition check error at boot t
sense indicates medium not present
sda block size assumed to be 512 bytes, disk size 1GB
patition check: sda I/O error dev 08:00, sector 0
I/O error dev 08:00, sector 0
unable to read partition table
(other stuff unrelated)
kernel panic
i can boot up using the cdrom to get to "linux rescue; c
hich is ok if
it's your home box. Be careful with spaces!!
Re-boot and have fun.
Reven
- Original Message -
From: "Ashley Ratcliffe" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, October 03, 2003 3:00 PM
Subject: permissions of fat32 partition
Hello,
I have a problem which i can't solve and don't know how to.
I have the redhat linux 9 partition and a FAT32(F: in windows) partition, i
also have windows on a different partition(C:). There is only files and
folders on the F: drive.
THE PROBLEM
After mounting the F: . The p
On Thursday 25 September 2003 04:57 am, Volker Kroll wrote:
> On Wed, 2003-09-24 at 03:06, Alejandro Calbazana wrote:
> > Not sure if parted can resize ext3 partitions?! I don't think it does
> > (at least it didn't when I tried this some time ago).
>
> I used parted to resize ext3, so
on a
On Wed, 2003-09-24 at 03:06, Alejandro Calbazana wrote:
> Not sure if parted can resize ext3 partitions?! I don't think it does (at
> least it didn't when I tried this some time ago).
I used parted to resize ext3, so
HTH
Volker
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTE
al Message -
From: "Nurullah Akkaya" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, September 23, 2003 5:19 AM
Subject: Re: Low Partition Space
> both partion magic and gnu parted can resize the partions check them
> out...
> --
> Nurullah Akkaya
On Tue, Sep 23, 2003 at 03:57:38PM -0400, Richard Wigfall wrote:
> My RH 6.2 system is running low on space in the / partition, and my
> other RH7.3 system (upgraded from RH6.2) is running low on space in the
> /boot and /usr partitions. Is there any way to increase the size of
both partion magic and gnu parted can resize the partions check them
out...
--
Nurullah Akkaya
[EMAIL PROTECTED]
Registered Linux User #301438
What lies behind us and what lies before us are tiny
matters compared to what lies within us.
"If at first an idea is not absurd, there is no hope f
My RH 6.2 system is running low on space in the / partition, and my
other RH7.3 system (upgraded from RH6.2) is running low on space in the
/boot and /usr partitions. Is there any way to increase the size of
these partitions, as I have plenty of disk space available on other
partitons
Himanshu Arora wrote:
Hi Folks!
I want to append some hard-disk space to my linux partition. If this is
not possible then how can i create new partition with ext3 filesystem.
Thanks in advance
Himanshu Arora
IIIT - Hyderabad
India
Depending on what you want to do, another option is to
Read the info on 'parted'.
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:redhat-list-
> [EMAIL PROTECTED] On Behalf Of Himanshu Arora
> Sent: Wednesday, September 03, 2003 1:53 PM
> To: [EMAIL PROTECTED]
> Subject: any way to add more space on alread
Hi Folks!
I want to append some hard-disk space to my linux partition. If this is
not possible then how can i create new partition with ext3 filesystem.
Thanks in advance
Himanshu Arora
IIIT - Hyderabad
India
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https
o Windows in a very long
> > time, I would like to get rid of it and make use of the space.
> >
> > Is there any way I can do that without having to reinstall RH?
> >
> > Thanks,
> > James
> >
>
> Hi James,
>
> If you're currently booti
> Thanks,
> James
>
Hi James,
If you're currently booting with grub it shouldn't matter
that this this partition is marked as "boot". To verify
this _before_ reformatting the partition try the following:
Have a Redhat installation disk on hand and make sure you
kn
Hi. I have a system (RH8) that has the following:
(parted) print
Disk geometry for /dev/hda: 0.000-38166.679 megabytes
Disk label type: msdos
MinorStart End Type Filesystem Flags
1 0.031 20002.807 primary ntfsboot
2 20002.808 20104.782 primary ext3
On Tue, 2003-08-26 at 07:07, Stephen Kuhn wrote:
> On Tue, 2003-08-26 at 13:38, Brian Ashe wrote:
>
> > One, I don't know if you believe that a different partition layout will affect
> > the performance of the system or not, but other than a few rare
> >
- Original Message -
From: Marcos de Souza Trazzini <[EMAIL PROTECTED]>
Date: 25 Aug 2003 08:14:24 -0300
To: [EMAIL PROTECTED]
Subject: Re: help - boot problems possibly from partition magic
> On Mon, 2003-08-25 at 05:24, richard yuwono wrote:
> > hi,
> >
>
On Tue, 2003-08-26 at 13:38, Brian Ashe wrote:
> One, I don't know if you believe that a different partition layout will affect
> the performance of the system or not, but other than a few rare
> circumstances, it rarely does.
Sorry, but beg to differ - load balancing helps.
By
On Tue, 2003-08-26 at 12:22, Scot Huntsberry wrote:
> I am going to reinstall RH 9 tomorrow because my system has gotten so
> slow that it is ridiculous. I was wondering if I could get some
> suggestions oh how to best partition a 50gb hard drive to maximize the
> efficiency of th
Scot,
On Monday August 25, 2003 10:22, Scot Huntsberry wrote:
> I am going to reinstall RH 9 tomorrow because my system has gotten so
> slow that it is ridiculous. I was wondering if I could get some
> suggestions oh how to best partition a 50gb hard drive to maximize the
> effic
iculous. I was wondering if I
> could get some
> suggestions oh how to best partition a 50gb hard
> drive to maximize the
> efficiency of the system. I would really appreciate
> any suggestions the
> group could provide.
>
> Thanks,
>
> Scot
>
>
> --
&g
I am going to reinstall RH 9 tomorrow because my system has gotten so
slow that it is ridiculous. I was wondering if I could get some
suggestions oh how to best partition a 50gb hard drive to maximize the
efficiency of the system. I would really appreciate any suggestions the
group could provide
On Mon, 2003-08-25 at 05:24, richard yuwono wrote:
> hi,
>
> i had rh 9.0 and win2k running nicely on my box at home and recently i installed
> partition magic 8.0. after rebooting the grub splash screen no longer came up, but
> instead i got a grub prompt. i tried a boot disk
hi,
i had rh 9.0 and win2k running nicely on my box at home and recently i installed
partition magic 8.0. after rebooting the grub splash screen no longer came up, but
instead i got a grub prompt. i tried a boot disk which got a bit further but gave me
"kernel panic: no init found"
Well, first of all I don't see why it would be giving errors about ext3
partitions, but that's besides the point if you have copied the
partition. You need to reinstall GRUB to point to the new partition. On
sdb1 or sdb1. I don't remember the command it is something like
grub-in
I have read the MAN on parted, but I don't see how this could help. It just
states that it is a utility for copying/resizing a partition. I use parted
and receive errors because I am using EXT3 partitions. This does not seem to
be an option.
I have the data copied, I am just looking to boot
Hat64; Valhalla; RedHat
> Subject: Moving partition
>
> First off, I have a RAID array where I installed RedHat. I have the
> following partitions:
>
> /dev/sda2 as /
> /dev/sda1 as /boot
> /dev/sdb1 as /newRoot
>
> I have copied the / partition
First off, I have a RAID array where I installed RedHat. I have the
following partitions:
/dev/sda2 as /
/dev/sda1 as /boot
/dev/sdb1 as /newRoot
I have copied the / partition to /newRoot and want to mount /dev/sdb1 as /.
I have tried editing grub.conf to point
Hi,
>-Original Message-
>From: Sundeep Saini [mailto:[EMAIL PROTECTED]
>Sent: Monday, August 18, 2003 8:31 AM
>To: [EMAIL PROTECTED]
>Subject: How to format the linux partition
>
>
>Linux Gurus,
>I am a new user of linux. I am facing some problem.
>I want
Linux Gurus,
I am a new user of linux. I am facing some problem.
I want to format one of my exsisting partition.I try to unmount one
patrition
/dev/hdb7 -- /mypartition 1GB
I try to unmount it , then i got the warning error that this partition is in
use so it cant be unmount.
Then i
2003 7:56 PM
> To: [EMAIL PROTECTED]
> Subject: Re: Moving root partition
>
> On Mon, 18 Aug 2003 18:03:49 -0600
> "Christian Fredrickson" <[EMAIL PROTECTED]> wrote:
>
> > I have a disk drive that required a new driver be compiled on RedHat
> 9 in
> &g
pth -print | cpio -padumV /newRoot to copy / to
> the new drive.
>
> I edit fstab to mount old root to /newRoot and mount the new drive as /. I
> reboot and get an error in e2fsck while the partitions are being checked.
> Are there any steps that I am missing in order to move this p
new drive as /. I
reboot and get an error in e2fsck while the partitions are being checked.
Are there any steps that I am missing in order to move this partition?
Chris
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 16 Aug 2003 17:42:02 -0600, Earl Eiland wrote:
> On Fri, 2003-08-15 at 07:45, Jason Dixon wrote:
> > On Fri, 2003-08-15 at 09:26, Earl wrote:
> > > I'm using RH9 with ext3 partitions. I want to add another ext3
> &g
On Sat, 2003-08-16 at 19:42, Earl Eiland wrote:
> So where do I find tunefs? It doesn't appear to be included with the
> RH9 distro, nor has a search online uncovered anyplace to download it...
Sorry, that should've been tune2fs (/sbin/tune2fs).
--
Jason Dixon, RHCE
DixonGroup Consulting
http:/
want to add another ext3
> > partition. How can I do this? Parted, for instance can edit ext3
> > partitions, but not create new ones.
>
> Ext3 is simply ext2 with a journal. Create your ext2 filesystem, then
> your journal with "tunefs -j /dev/hdXX".
>
>
Jason Dixon wrote:
On Fri, 2003-08-15 at 09:26, Earl wrote:
I'm using RH9 with ext3 partitions. I want to add another ext3
partition. How can I do this? Parted, for instance can edit ext3
partitions, but not create new ones.
If you have free space on the drive use fdisk. Rememb
On Fri, 2003-08-15 at 09:26, Earl wrote:
> I'm using RH9 with ext3 partitions. I want to add another ext3
> partition. How can I do this? Parted, for instance can edit ext3
> partitions, but not create new ones.
Ext3 is simply ext2 with a journal. Create your ext2 filesys
I'm using RH9 with ext3 partitions. I want to add another ext3
partition. How can I do this? Parted, for instance can edit ext3
partitions, but not create new ones.
Earl Eiland
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/r
Nick Lindsell wrote:
On Mon, 2003-08-04 at 13:08, bEEnHeX wrote:
FAT32 partition on physical disk 1 (other than that one with RH 9.0) is not
mounted by default also. Please, how to do that?
As root,
#> mkdir /windows
{ or /mnt/windows or wherever.. }
#> mount -t vfat /dev/h
you can obtain the modules and instructions
> > 3) search redhat.com for ntfs a person provides the modules.
> >
>
> Should be no need for any of the above, at least for NTFS - I can
> mount my NTFS partition RO using a default RH kernel with no
> tinkering, not sure if t
modules.
> >
>
> Should be no need for any of the above, at least for NTFS - I can
> mount my NTFS partition RO using a default RH kernel with no
> tinkering, not sure if the same applies to FAT32.
You can mount FAT32 partitions RW with the default install. I have a dual
boot
]
Subject: RE: NTFS partition mount problem
My kernel version on RH 9.0 is 2.4.20-8
Is it possible to mount FAT32 and NTFS instead of making any changes to
kernel or updating?
- Original Message -
From:"Otto Haliburton" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
On Mon, 2003-08-04 at 07:50, bEEnHeX wrote:
> My kernel version on RH 9.0 is 2.4.20-8
>
> Is it possible to mount FAT32 and NTFS instead of making any changes to
> kernel or updating?
Use the RPMs from the Linux-NTFS project:
http://linux-ntfs.sourceforge.net/
--
Jason Dixon, RHCE
DixonGroup
OK, guys, I'll try it ... thanx.
bEEnHeX
- Original Message -
From:"Nick Lindsell" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Sent:04 Aug 2003 13:26:22 +0100
Subject: RE: NTFS partition mount problem
> On Mon, 2003-08-04 at 13:08, bEEnHeX wrote
On Mon, 2003-08-04 at 13:08, bEEnHeX wrote:
> FAT32 partition on physical disk 1 (other than that one with RH 9.0) is not
> mounted by default also. Please, how to do that?
As root,
#> mkdir /windows
{ or /mnt/windows or wherever.. }
#> mount -t vfat /dev/hd(x)
To: [EMAIL PROTECTED]
> Subject: RE: NTFS partition mount problem
>
> FAT32 partition on physical disk 1 (other than that one with RH 9.0)
> is not
> mounted by default also. Please, how to do that?
>
> Disk manager displays only floppy, cdrom and linux partitions. My
>
FAT32 partition on physical disk 1 (other than that one with RH 9.0) is not
mounted by default also. Please, how to do that?
Disk manager displays only floppy, cdrom and linux partitions. My Windows
C: disk is missing in any form. Any help?
I repeat, I did not any changes to RH 9.0 after the
need to do.
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:redhat-list-
> [EMAIL PROTECTED] On Behalf Of bEEnHeX
> Sent: Monday, August 04, 2003 6:50 AM
> To: [EMAIL PROTECTED]
> Subject: RE: NTFS partition mount problem
>
> My kernel version on RH 9.0 is 2.4
ubject: RE: NTFS partition mount problem
> You can what kernel do you have you are one of the only ones since
> redhat doesn't support ntfs.
>
> > -Original Message-
> > From: [EMAIL PROTECTED] [mailto:redhat-list-
> > [EMAIL PROTECTED] On Behalf Of James
"Otto Haliburton" wrote:
> You can what kernel do you have you are one of the only ones since
> redhat doesn't support ntfs.
>
Hmmm ..
[EMAIL PROTECTED] jg]# mount | grep win
/dev/hda1 on /windows type vfat (rw)
OK, my mistake - I thought it was NTFS! I've definitely had
NTFS RO before on my
ECTED]
> Subject: Re: NTFS partition mount problem
>
>
> "Otto Haliburton" wrote:
> > Yes, there are several possibilities they are
> > 1) rebuild your kernel enabling ntfs readonly access
> > 2) www.rhil.net where you can obtain the modules and instruct
be no need for any of the above, at least for NTFS - I can
mount my NTFS partition RO using a default RH kernel with no
tinkering, not sure if the same applies to FAT32.
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
redhat-list-
> [EMAIL PROTECTED] On Behalf Of bEEnHeX
> Sent: Monday, August 04, 2003 4:46 AM
> To: [EMAIL PROTECTED]
> Subject: NTFS partition mount problem
>
> I have installed RH on my physical disk number 2 along with other NTFS
> partition which was not mounted by default
I have installed RH on my physical disk number 2 along with other NTFS
partition which was not mounted by default after login. Is it possible to
mount and then view the contents of NTFS and FAT32 partitions. If so,
please point me where can I find more info about that.
Disk manager show all
try parted!!
On Fri, 2003-08-01 at 16:12, Distribution Lists wrote:
> How would I expand a partition ?
> /dev/sda9 1035660859568123484 88% /
>
> I'm not using LVM.
>
> Thanks
>
>
> --
> http://www.e-securenetworks.net
&g
How would I expand a partition ?
/dev/sda9 1035660859568123484 88% /
I'm not using LVM.
Thanks
--
http://www.e-securenetworks.net
http://www.shopper-holic.com
http://www.planet247.net
http://www.auction-holic.com
--
redhat-list mailing list
unsubscribe mailto:[
On Wed, Jul 30, 2003 at 03:14:05PM +0200, Pablo Rodriguez Gonzalez wrote:
> Hi guys,
>
> I want to resize an ext3 partition, and I don't find how to do it.
>
> GNU Parted doesn't work. Yes, I know that for ext3 the start of the partition must
> stay fixed, but doe
Hi guys,
I want to resize an ext3 partition, and I don't find how to do it.
GNU Parted doesn't work. Yes, I know that for ext3 the start of the partition must
stay fixed, but doesn't work ;-)
Any other app?
Regards,
--
Pablo Rodriguez Gonzalez
Director General
[EMAIL PROTEC
Look at "/sbin/mkfs.vfat". It is provided by the dosfstools
package.
-Steve
-Original Message-
From: Andre Kirchner [mailto:[EMAIL PROTECTED]
Sent: Tuesday, July 29, 2003 2:35 PM
To: [EMAIL PROTECTED]
Subject: How to format a VFAT partition
Hi,
how can I format a VFAT part
Hi,
how can I format a VFAT partition with Linux? I don't wan't to use any Microsoft tool.
Thanks
Andre
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
Jason Dixon wrote:
On Sun, 2003-07-27 at 16:36, John Nichel wrote:
How can I view my partition table on RH 9 with /etc/fstab is screwed up,
and I can only boot into single user mode?
fdisk -l /dev/hd*
Jason Dixon, RHCE
DixonGroup Consulting
http://www.dixongroup.net
Thanks. I was trying that
John Nichel wrote:
> How can I view my partition table on RH 9 with /etc/fstab is screwed up,
> and I can only boot into single user mode?
/sbin/fdisk
at the Command (m for help): prompt, type 'p'
> By-Tor.com
> It's all about the Rush
> http://www.by-
On Sun, 2003-07-27 at 16:36, John Nichel wrote:
> How can I view my partition table on RH 9 with /etc/fstab is screwed up,
> and I can only boot into single user mode?
fdisk -l /dev/hd*
Jason Dixon, RHCE
DixonGroup Consulting
http://www.dixongroup.net
--
redhat-list mailing list
unsub
How can I view my partition table on RH 9 with /etc/fstab is screwed up,
and I can only boot into single user mode?
--
By-Tor.com
It's all about the Rush
http://www.by-tor.com
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
07/27/03
Hello All,
Question 1) Is there an archive of the messages to this list? If so,
where do I find it?
I now have a dual-boot machine: Windows NT 4.0 and redhat 9.0 Shrike
Question 2) I would like to have Shrike recognize the NT file
partition, done in FAT16. How to Do?
Question
Upon reboot, both swap areas will be used. First, the swap partition read
from /etc/fstab and afterwards the swapfile from the "swapon swapfile"
command issued from /etc/rc.d/rc.local. Run "top" and you'll see the total
of both swaps.
James
-Original Message-
Will it use the actual swap partition or only one
of them ?? just a question ??
or should it use both and the new swap would be more
or would it waste the swap partition ???
Hiten.
--- "James D. Parra" <[EMAIL PROTECTED]> wrote:
> Thanks. This worked out well.
>
>
Thanks. This worked out well.
I added "swapon swapfile" to /etc/rc.d/rc.local
James
-Original Message-
From: Leonard den Ottolander [mailto:[EMAIL PROTECTED]
Sent: Thursday, July 24, 2003 2:05 PM
To: [EMAIL PROTECTED]
Subject: Re: Help --need to increase swap partition o
Hi James,
> How can I increase the swap size on production system? We added more RAM
> and I need to increase the swap space.
You could run parted and resize the partition that way. You will need
to reboot/reinit the machine in that case. Another option is to create
a swapfile on a par
mb rule, and need not be followed strictly. Now if you really want to
increase swap space, the easiest path is to just add a second swap partition.
Linux will spread swap usage among all active swap areas.
Cheers,
--
Javier Gostling D.
<[EMAIL PROTECTED]>
--
redhat-list mailing list
un
On Thu, 2003-07-24 at 13:32, James D. Parra wrote:
> Hello,
>
> How can I increase the swap size on production system? We added more RAM and
> I need to increase the swap space.
>
Unless you left space adjacent to the swap partition on the disk, you
cannot increase its size,
Hello,
How can I increase the swap size on production system? We added more RAM and
I need to increase the swap space.
Many thanks,
James D. Parra
[EMAIL PROTECTED]
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
Hai can you tell me how to mount the SCO Xenix 2.3.4 from redhat 9 kernel 2.4.20-8 ?
i'll really2 apreciate for this help
Best Regards,
DavidEric Wood <[EMAIL PROTECTED]> wrote:
Yeah, SCO stop giving out personal editions of OpenServer because it wascausing a decline in sales of their server pro
Yeah, SCO stop giving out personal editions of OpenServer because it was
causing a decline in sales of their server product. Yeah right. Meanwhile
SCO continued to steal Linux code and produce Skunkware offerings.
Take-Take-Take! All the while, SCO never offered to aid in their fs support
in Linu
r personal use.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Linux Tard
Sent: Tuesday, July 15, 2003 4:00 PM
To: [EMAIL PROTECTED]
Subject: Re: Viewing SCO Partition with RH 7.3
Pablo
you'll need to recompile your kernel to include both
FS type sup
On Tue, 15 Jul 2003, Keith Morse wrote:
> The caveat I think is to find linux support for SCO file system. I tried
> this 3-4 years ago and could not find any linux kernel support for their
> file system.
I don't know how many different file systems SCO has used, but
Unixware usually uses vxf
Pablo
you'll need to recompile your kernel to include both
FS type support as well as emulation if you want to
run binaries on that system, specifically;
CONFIG_SYSV_FS
is the FS TYPE you want to include as a module, sysv.o
If you get lost there is a paper www.crazytrain.com
under papers, kern
On Mon, 14 Jul 2003, Ray Abbitt wrote:
> On Mon, 14 Jul 2003, Joseph A Nagy Jr wrote:
>
> > On Monday 14 July 2003 22:59, Pablo L. Robles wrote this in an attempt
> > to be witty and informative:
> > > Hello Gang:
> > >
> > > I have some customer valuable data on a SCO HD. The HD has some bad
>
On Mon, 14 Jul 2003, Joseph A Nagy Jr wrote:
> On Monday 14 July 2003 22:59, Pablo L. Robles wrote this in an attempt
> to be witty and informative:
> > Hello Gang:
> >
> > I have some customer valuable data on a SCO HD. The HD has some bad
> > sectors the prevent it from booting. I have no acces
On Monday 14 July 2003 22:59, Pablo L. Robles wrote this in an attempt
to be witty and informative:
> Hello Gang:
>
> I have some customer valuable data on a SCO HD. The HD has some bad
> sectors the prevent it from booting. I have no access to other SCO
> machines. Looked all over the fdisk and f
Hello Gang:
I have some customer valuable data on a SCO HD. The HD has some bad
sectors the prevent it from booting. I have no access to other SCO
machines. Looked all over the fdisk and format man pages but still don't
know of a way to mount the SCO disk with RH 7.3, I even connected the
driv
Le 02/07/2003 15:31, « Bo Peng » <[EMAIL PROTECTED]> a écrit :
> Although its manual says 'windows OS required', redhat 9 can handle the
> controller and harddrive without problem.
*** Thanks.
> 1. transcode can not read (even 'ls' fail) files >2G fr
On Wednesday 09 July 2003 06:11 pm, Nicholas wrote:
> i read a documentation on howto remove grub from linux partition
> and reinstall it back with lilo, but the guy provided wrong info by
> telling the public to : use a win98 startup disk to run fdisk /mbr
>
> then when the time i
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thu, 10 Jul 2003 06:11:29 +0800, Nicholas wrote:
> i read a documentation on howto remove grub from linux partition
> and reinstall it back with lilo, but the guy provided wrong info by
> telling the public to : use a win98 startup di
1 - 100 of 797 matches
Mail list logo