Mike
mryan...@tampabay.rr.com
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Gmail - Kevin,
Natalia, Stacey & Rochelle
Sent: Thursday, June 24, 2010 7:26 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Doug Hall Voter - W
Hi Guys,
I am wondering what one would pay for a single Doug Hall voter module in
good working condition?
Be happy to get your replies directly.
Regards
Kevin.
ng if someone would like to oblige me
with a location. :)
Cheers,
--- In Repeater-Builder@yahoogroups.com, "Gmail - Kevin, Natalia, Stacey &
Rochelle" wrote:
Hi Guys,
The manuals including the service manual (from memory) and the software is
available from the Taits NZ web site if you need it.
Kevin, ZL1KFM.
- Original Message -
From: Chris
To: Repeater-Builder@yahoogroups.com
Sent: Monday, May 10, 2010 11:58 AM
Subject: Re: Re:
Hi All,
I am in a situation that I need some advice on implimenting an access DTMF tone
for you repeater.
So far.
We have installed a CTCSS tone on the RX of our repeater, and have been asked
"How does one access it if they don't have CTCSS onboard?"
Should mentioned the repeater is open, the
You can TX on both bands at the same time through a diplexer. It does not
matter as long as you don't go over the rated Max power for the two.
I have run 50watts on both bands through a diamond diplexer without any
problems (was using two single band radios)
This was then fed into a dual-band dia
Hi Guys,
I am in the process of building a telementry logger for our repeater, using a
POCSAG encoder into a GM300.
I have gotten the connections coming in from the rear 16 pin socket. Radio is a
8 Ch, but will most likely only be programmed with 1 Ch. Still got to program
the Telementry freq i
Hi All,
Sorry for asking this group, but I know there is a heap of knowledgible people
on this group.
Right I have a GP328 standard H/H (not the plus model, which is smaller)
The front case got damaged and I got a replacement front to make the radio
usable again.
I have been able to remove the
So, am I correct in understanding that this Batlabs circuit uses the mic socket
to the audio transfer?
I thought there was one that used the connector in the back of the radio?
However if this works I have a few radios to try it out on.
Regards
Kevin.
- Original Message -
From: Stev
Hi All,
I am having a clean out of my shack and found a "Xperteck Electronics" Computer
based DVR card, mainly for the ACC range of controllers. Don't know but could
be used with other controllers.
I have the card, software in 5 1/4 discs and the manual. I might be able to
convert the software
Hi All,
Update, I have sold the TM-441 UHF radio, thanks to those who were interested.
I still have the TM-241 (VHF) available. Suitable to connect to a DHE RBI-1
remote interface for repeater/remote linking.
See below for discription if you are interested.
Still US$175.00 including shipping to t
Hi All,
Hope you don't mind this For Sale message.
I had a Remote interface using a DHE RBI-1 connected to our Link-Comm RLC-3
controller.
We decided not to continue with the install and pulled it from operation. Never
actually opened it to the users.
I have recently parted with the RBI-1 inter
Ed and Others
Thanks for your ideas and thoughts.
The solar cells have a small regulator in line to the batteries, then batteries
to repeater system.
We do have mains to the site but this is only for requirements when there is
heavy usage and the voltage gets down. The controller will switch to
: rahwayflynn
To: Repeater-Builder@yahoogroups.com
Sent: Friday, April 03, 2009 12:31 AM
Subject: [Repeater-Builder] Re: Anyone got a Amp-meter Circuit to Repeater
Controller for Telementry Readback?
--- In Repeater-Builder@yahoogroups.com, "Gmail - Kevin, Natalia, Stacey &
Hi All,
I am in need of a circuit to read amps to my controller.
Want to be able to read the current being used at the repeater site as well as
the charging current to the batteries.
I am using a RLC-3 controller.
I have a current meter in-line at the site, but a reference from the repeater
wo
Hi All,
I have 4 spare GM-300's, 8ch model which I have modified to 16ch's on 430Mhz.
They have the 16 pin connector in the back.
I would like to try and use them with a Doug Hall Voter and see how they work.
At this stage I only want to test it in the shack, to see how it works before I
look at
ers in
the air otherwise unsealed with no sign of weather issues after 2.5 years
(obviously nothing in radio years, but.)
JS
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Gmail - Kevin, Natalia,
Stacey & Rochelle
Sent: Sunday, March 01,
al Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Gmail - Kevin,
Natalia, Stacey & Rochelle
Sent: Sunday, March 01, 2009 8:29 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Coax Cable - Question
Hi
Hi Guys,
Sorry about addressing this question here, but I know it has been talked about
before and I know there is a lot of knowledge from experence hooking up
repeaters.
Okay, my question.
At my work they have been installing and upgrading our wireless Lan systems.
In the process of the instal
Thanks Guys for the info, no need to reply.
Kevin.
Get Skype and call me for free.
- Original Message -
From: Laryn Lohman
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, February 18, 2009 3:18 PM
Subject: [Repeater-Builder] Re: Somewhat OT - an interesting antenna d
Wow,
What an interesting artical. A lot of information on the early days of TV in
the US.
I was however interested in the Cone Dipole antenna they had display in a
couple of the photos. I did a quick search for cone dipole on google but came
back with no results. Would be interested in sourcing
...@yahoogroups.com] On Behalf Of Gmail - Kevin,
Natalia, Stacey & Rochelle
Sent: Sunday, February 15, 2009 1:27 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] New 10mtr Repeater Active from Auckland, NZ (ZL
Land) - Slightly OT
Hi All,
At long last the S
Hi All,
At long last the South Auckland Repeater Group, based in Auckland, NZ has
finally got it's 10mtr Repeater up and operational.
The freq is 29.640 with no CTCSS (we are not permitted to run CTCSS for access
in NZ, may have to look at it later if it requires it and we get approval).
It is c
Hi,
Is Matt Krick, KC7GSA a member of this group?
If so could he please advise if he has a board design for his SuperSquelch MK4.
I have a need for a couple of these and before I design one if there is one
already could a please request copy of it?
Thanks for the info, and all have a Merry Chri
Hi All,
Came across this web page of a guyed tower in Russia. One things for sure I
would never climb it.
Wife tells me it says it is just over 300mtrs (she's Russian). The heights are
of other towers in Russia, at 298mtrs Ekatenburg.
http://englishrussia.com/?p=2159#more-2159
Regards Kevin, ZL
Hi,
Is there a point inside the Mitrek that one can take the audio out to the
controller (in this case a Link-Comm RLC-2A)? A low band Mitrek (33Mhz)
I have downloaded the information from"Lou's Mitrek Repeater Conversion" and a
couple of others which mention a schematic for emphasis before going
Hi All,
I came across a web site that had a listing for a Tait T700 Mobile 70cm
Repeater.
It appears that they are using one T700 and turning it into a full duplex unit.
I have a few T700 UHF radios sitting on my shelf and was wondering about using
them as a portable/moble repeater.
Does anyone
HI All,
After 15 years of faithful service our Diamond X510 dual-band RX antenna has
failed.
We started getting some noise and poor signal input to the 2mtr repeater. We
had decided to check the 2x X510 antennas (1x TX and 1x RX).
A couple of weeks ago the TX was checked and found to still be in
: Repeater-Builder@yahoogroups.com
Sent: Monday, October 20, 2008 2:34 PM
Subject: Re: [Repeater-Builder] Commerical Grade Diplexer for 2mtrs and 70cm
- Are They Available?
TX RX Systems makes them for commercial users.
Chuck
WB2EDV
- Original Message -
From: Gmail - Kevin
Hi All,
I am interested in obtaining a commerical grade diplexer for 2mtrs and 70cm
over a ham grade one.
Question is, Are these available? And of course if they are what is the best
supplier?
I want to use one in a repeater installation off of 1x Diamond X510 dual-band
antenna.
(For those inte
Get Skype and call me for free.
Hi All,
We have been offered a Kenwood TS-430S as a radio for use in our repeater
system.
I have worked with using a TS-440S as a HF remote, using a SSB Smart Squelch
for the COS trigger.
I am however in the need of a trigger for when it is used as a FM receiv
That will be the series I as the series 2 can be drect programmed.
Kevin, ZL1KFM.
Get Skype and call me for free.
- Original Message -
From: anpap
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, August 31, 2008 9:51 AM
Subject: [Repeater-Builder] Re: Tait 800 - EPROMS,
If you want I can scan my manuals for the series 1 Taits for 2mtrs.
You will just have to give me some time, have to take the wife to a Russian
weekend this weekend.
Regards
Kevin, ZL1KFM.
Get Skype and call me for free.
- Original Message -
From: Ed Yoho
To: Repeater-Builder
Contact me directly.
Kevin.
Get Skype and call me for free.
- Original Message -
From: cisfuk
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, August 28, 2008 11:35 AM
Subject: [Repeater-Builder] Tait 800 - EPROMS, Manuals, Software
hi, can i use 27c256 eproms? and
Good Morning All,
Would someone on the list have a working 10mtr Mitrek they would be willing to
sell?
If so could you please contact me off the list, my email address will be in the
header.
I have a couple and can not get them anywhere near the specs for a good RX, the
best I can get is 1.8-2m
Hi All,
I am looking to see if the Tait T346, or come to that any of the Tait T300
series TX modules can be remotely switched between high and low power as
required?
Like if the mains goes off, and are on battery back-up, it will switch to the
low power setting, and then switch back to high pow
Hi All,
This request is slightly OT but still for Amateur and possible Repeater use.
I read an artical about using a PC power supply as a 12 and 5 volt/ high amp
atable power supply for the bench.
Looking over the specs it looks good for 12v at 19A and 5v at over 30A. Was
interested and due to t
on freq when it was one of the variable
type and it worked fine after the adjustment, so I know it is reasonably
accurate.
73 - Jim W5ZIT
--- On Sat, 7/19/08, Gmail - Kevin, Natalia, Stacey & Rochelle <[EMAIL
PROTECTED]> wrote:
From: Gmail - Kevin, Natal
Hi All,
I have a Optoelectronics Handi-Counter Model 2300. I brought it at Dayton in
1995. A great piece of equipment, and I use it alot. Still works fine, except I
pulled the NICADs out a few year back, not holding there charge, and never got
around to replacing them, works fine from 12v.
Howe
: [Repeater-Builder] Re: NBC Dateline story on Tower Climbers
--- In Repeater-Builder@yahoogroups.com, "Gmail - Kevin, Natalia,
Stacey & Rochelle" <[EMAIL PROTECTED]> wrote:
>
> Just a shame some of us won't be able to see this interesting doco,
not in th
Just a shame some of us won't be able to see this interesting doco, not in the
cont USA. Unlikely our TV companies will show this any time soon, maybe ever.
Any change someone will record it and make it available via a torrent?
Heres hoping.
Kevin.
- Original Message -
From: Chri
Hi,
I have a need for switching AC and Battery power at our repeater site.
Current setup is mains 230v AC and 12v Battery charging via solar cells.
Due to the increasing chargers for mains (and still going up) we want to
utilise battery power more and use the mains for back-up and when the batter
Hi All,
I feel like a complete idiot, I was using my Kenwood TH-78A HH with the tone on
and wondering why I could not get a trigger from the ST-104 CTCSS board.
I then had a thought and used my TM-D700A and then it worked, triggered when
there was a valid CTCSS tone. I can now guess my HH does n
Laryn and Others,
First of all thank you for your information, I have used this to install the
modules.
BUT (yes there is a but) the things don't trigger. I do have the information
sheet already downloaded from Repeater-Builder.
I fitted a pull-up resister to the decode- line and have 8v on the
Mike,
The Link-Comm RLC-DVR can do what I think you are talking about.
I have one on our system and it is programmed to allow an operator to record
his callsign and name, and then replay it when he releases the PTT.
It worked okay. However I have to reinstall the programming, had a power cut
and
To Mike and Others,
First of all thanks for your information in getting my 10Mtr Mitrek
running.
I followed all the information, especially from Mikes excellent write up.
I have since been up to install the TX radio at the repeater site and
checked everything was working.
It all appeared to
Bob,
Just got your message, I will have a look at the RLC-3 and see what it has.
Thanks for the info, and of course to all the others that supplied information.
Kevin. ZL1KFM.
Get Skype and call me for free.
- Original Message -
From: [EMAIL PROTECTED]
To: Repeater-Builder@ya
iginal Message -----
From: Kevin & Natalia
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, December 06, 2007 9:57 PM
Subject: [Repeater-Builder] Transistor Switch
Hi All,
I know this is a silly question, but my brain is dead and I can not
remember how I did the
Hi All,
I know this is a silly question, but my brain is dead and I can not remember
how I did the other ones.
I am in need of a simple transistor switch to ground. I am using a control line
in my repeater controller to switch on some cooling fans, the controller will
only accept a sink to grou
Hi All,
I am looking for a simple circuit that I could use to connect either 2x RX's or
2x TX's onto 1 port of my controller.
Reason, I am dealing with a split site repeater. So I don't want to waste a
port for half a system, that I could use for another use.
I was then thinking about using the
Hi,
I don't have too much to do with any of the Tait offices outside NZ, but having
only dealt with the head office here in Christchurch NZ I have received
excellent help with the Tait repeater modules our repeater group uses.
I include their phone number if you wish to contact them. The free nu
Hi All,
I need some information on the adjustment for a low band (10m), to lower the
power to around 50w?
I do have a manual, however it is still packed away from our recent house move.
Thanks in advance for any help.
Regards
Kevin, ZL1KFM.
Get Skype and call me for free.
sparc_nz
Des
Hi Dave,
Can't for some reason get into your web-page, Explorer 7 keeps stopping
"ActiveX" from installing. I have even allowed you as a safe site, it does
appear to install, as the boxes come up saying to install, but still keeps the
menu from loading.
Don't know what's wrong, maybe a bug in I
Hi All,
I have the above PL board in a Mitrek Low-VHF model radio I am
modifying.
I want to be able to use the onboard PL, and feed an output to my
controller.
I do not have any information on how to reprogram the PL to anything
different, and also where to tap a switching voltage to the
ere..
> http://65.173.252.47/Miktrek_Info.htm
>
> 73
> Mike
> K5JMP
> www.k5jmp.us
>
>
> -Original Message-
> From: Repeater-Builder@yahoogroups.com
> [mailto:[EMAIL PROTECTED] Behalf Of Kevin & Natalia
> Mitchell
> Sent: Saturday, April 29, 2006 1:38 AM
>
HELP,
I have just tried to open my newly aquired 6mtr mitrek, with the key that I
had for my 10mtr mitreks. This key opens all 6 radios I have, brought at
different times, from different sources across the State.
I found that it would not open. The cut is the same and fits in okay
Are there diff
Hi All,
I have a Mitrek for 50Mhz, I want to convert it for use as a 6mtr repeater.
Question is, is it possible to make it as a repeater from a single unit, or
do I need two radios?
I have all the information on converting, as I built units for a 10mtr
repeater, and a 2mtr unit.
If I can not use
Good idea, did not think about this option. This will serve our situation
well.
And will be an easy fix.
Regards
Kev.
>
> As has been pointed out, there are some problems with
> running two different PL tones at the same time, both
> on the TX and at the RX sites. It can be done, but it
> also c
Hi All,
I am wanting to use one TX from our repeater site, to link to two link
RX's, these are on opposite sides of the repeater.
I was thinking about having two different CTCSS tones, one for each, and
then having the TX generate the two tones together. This way I can use one
freq., but
Thanks everyone, I fully understand what is possibly happening here.
Regards
Kev.
- Original Message -
From: "Jim B." <[EMAIL PROTECTED]>
To:
Sent: Saturday, March 18, 2006 3:03 AM
Subject: Re: [Repeater-Builder] Yahoo Groups Question for Messages to
Repeater Builde
Hi Guys,
Sorry for the bandwidth, but I have a small problem when sending messages
to the group. It does happen on the other groups I belong to.
I used to be able to see any message I sent to the group, however other the
past 6 months when I send a message, I do not get a forward message f
Hi All,
I have a Doug Hall 4RV/2 voter.
I am in the process of connecting the unit up, but I can not find my manual
to wire and set it up.
I have connected up 3x receivers to the inputs, and toggled the switches to
operate, but the voter does not trigger any of the lines. So I need to check
the
a ten amp continuous load.
As mentioned in an earlier post, the true load will play a
factor.
Doug
- Original Message -----
From:
Kevin &
Natalia
To: Repeater-Builder@yahoogroups.com
Sent: Monday, February 13, 2006 12:07
AM
G'Day All,
I am about to install a set of back-up batteries for our repeater. Designed
for back-up use.
These are 2volt cells, 460amp/hr over 10hrs. What is written on them
So we have 6 cells connected together to give 12volts.
We are pulling , when everything is running, no more then 10amps.
For 2mtr Use
- Original Message -
From: "Kevin & Natalia" <[EMAIL PROTECTED]>
To:
Sent: Friday, November 25, 2005 12:37 PM
Subject: [Repeater-Builder] What Low Powered Portable Motorola Radio,
Suitable for Portable Repeater
> Hi All,
>
> What is a
Hi All,
What is a sutiable Motorola radio, for conversion to a portable repeater,
with low power operation of around 10 watts.(running off batteries)?
Regards
Kevin.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> T
g
> speaker module.
>
> 73
> Bernd
> DM5BM
>
>
> --- In Repeater-Builder@yahoogroups.com, "Kevin & Natalia"
> <[EMAIL PROTECTED]> wrote:
>>
>> Bernd,
>>
>> I have the Tait T-800 series 1 software here, and I can check and
> send y
Bernd,
I have the Tait T-800 series 1 software here, and I can check and send you a
file of your freq's required.
I have a T-800, which I reprogrammed a number of years ago, and did not have
any problems.
If there are any problems, I can always make a phone call to Tait, as there
are home based
feitures can be assessed for failure to comply.
>
> mark h.
>
> Kevin & Natalia wrote:
>
>>Hi All,
>>
>>We have run into a problem with some local interference getting into one
>>of
>>our link radios.
>>It is believed to be coming from one of th
Hi All,
We have run into a problem with some local interference getting into one of
our link radios.
It is believed to be coming from one of the TV home transmitters, that one
can buy from the local appliance shops.
It is producing a signal right on teh input of our link. I have put an extra
fi
and.
> The
> North American sales office can be reached at <[EMAIL PROTECTED]> The Rakon
> home
> page is at
>
> 73, Eric Lemmon WB6FLY
>
> Ronny Julian wrote:
>
>> I tried http://www.rakon.co.nz but it times out. Am I using the correct
>> URL?
>&
Hi Guys,
If you ever want crystals again, think about going off-shore, our crystal
company, Rakon, located in Auckland, New Zealand produces some of the best
crystals around. And they are not that expensive at all. Got a pair a couple
of months ago, and cost $29 each (about US$18). They do ship
Are you then saying that some of my cavities I have for 150Mhz, I can use
without any mods for around 450Mhz.
If this is correct, I would be very happy, as I can use them, instead of
them sitting around waiting to be used.
Kev.
- Original Message -
From: "skipp025" <[EMAIL PROTECTED]>
This is my third attempt, the first and second ones were sent, but did not
appear to be
returned by the forum :( Believe it may be a problem with the reply
function, a direct email worked.
Anyways try again.
To Mike and Others,
I am pleased to see someone put some information on a commercial di
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
This is my second attempt, first one was sent, but did not appear to be
returned by the forum :(
To Mike and Others,
I am pleased to see someone put some information on a commercial diplexer
for 2M and 70cm. I had a diamond diplexer, and work okay, but wanted better
performance.
I will look at t
To Mike and Others,
I am pleased to see someone put some information on a commercial diplexer
for 2M and 70cm. I had a diamond diplexer, and work okay, but wanted better
performance.
I will look at the TXRX wed-site, and see what they have, and of course
price.
You did mention about building on
either. Overall, wouldn't
> be *my* choice.
>
> Then, of course -- duplexers and frequency hopping creates
> another set of issues... not to say there aren't solutions;
> (separate antennas & LOTS of vertical separation...) much
> food for thought & experim
Hi Guys,and the Gals,
I am looking for a low power radio unit, to be used for a portable VHF, Ham
repeater.
Power out needs only be 10 watts max, RX and TX in the one unit, easy to
cahnge freq's when required, and ease of interfacing with a basic
controller.
I have seen and read informa
Simon,
Also join the FM828 group on Yahoo Groups, this can be of great help to you
also
[EMAIL PROTECTED]
Kevin, ZL1KFM.
www.qsl.net/zl1hk this has a link to mods for the FM828U to a repeater.
- Original Message -
From: "find_ya_own_id" <[EMAIL PROTECTED]>
To:
Sent: Wednesday, May 04,
Hi Guys,
As with the offer to myself in getting a "Gmail" account, I am opening up
some offers to those of you that would like a "Gmail" account.
Please contact me directly, and the 1st five emails received, I will send
you an invitation for joining.
Regards
Kevin, ZL1KFM
sparc(at)in
Hi All,
I recently acquired a Tait T-300 VHF repeater unit. Looking at using it in
one of our repeater installations.
Got everything working, and appeared to be putting out all the correct
levels, power etc.
However, after a few days, I was advised that the audio seemed to be low on
the o
Dean,
There is also a FM828 forum that you might like to join. It is helpful to
828 operators.
Kevin, ZL1KFM
- Original Message -
From: "Dean" <[EMAIL PROTECTED]>
To:
Sent: Friday, March 25, 2005 2:38 PM
Subject: [Repeater-Builder] Info on constructing a philips 828 repeater
require
Hi Dean,
Go to our web page www.qsl.net/zl1hk and follow the menu to information on
converting the 828 to a repeater.
If there are any questions you have about the conversion, drop me a line
direct. sparc(at)internet(dot)co(dot)nz.
Regards
Kevin, Zl1KFM
- Original Message -
From: "De
HI All,
I am setting up a Doug Hall Voter, with one main site, and 3 remotes.
Then I was thinking, how can one make it, so that when a signal report is
requested, it will give a reading from that remote.
Looked through the manual, and could not find anything.
So my question, is it possible
Hi All,
I need to link two RX's from one repeater site to two TX's at another
repeater site.
There is a UHF link between the 2, which was running the 2x 2m repeaters
together.
We would like to place the 10m TX at one of the sites, the RX at the
other.
I could put another UHF link up, but
Yahoo! Groups Links
To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an email to:[EMAIL PROTECTED]
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Would be interest please,
Regards
Kevin, ZL1KFM
- Original Message -
From: "DCFluX" <[EMAIL PROTECTED]>
To:
Sent: Thursday, December 23, 2004 10:23 AM
Subject: [Repeater-Builder] GMail Account
>
> I have 5 Gmail Invites avalible for first come first serve.
>
>
>
>
>
> Yahoo! G
uld also do but they are expensive these days
for anything that is quality
73 John VE3AMZ
- Original Message -----
From:
Kevin &
Natalia
To: Repeaters Users Group ; Repeater Builder Users
Group
Sent: Sunday, December 12, 2004 6:14
P
Hi All,
I need a simple interface for a 600 ohm output radio to a controller which
accepts 10k ohm.
This is a RX not TX.
I don't want to make a circuit board if I don't need to.
Any ideas?
Regards
Kevin.
Yahoo! Groups Links
To visit your group on the web, go to:http
Hi All,
I have a couple of wav files which I would like to try and use as a
courtesy tone.
Problem I have, is that the controller will only accept 1 or 2 tone
sequences
I would like to try and somehow get the tone pattern for the wav file, and
use them to program my controller.
Anyone g
Hi All,
I am after some information on the Tait T-377/PA/03 module.
This is fed by the Tait T-377/EX/02, via RF sense, and the main connections
coming in the back are 2 sets of power connectors, as well as a single white
wire.
The problem is I can not find any reference on what the white
Hi All,
I was wondering if anyone would have some information on the Tait T375 and
T377 modules.
The T375 is a VHF RX, and the T377 is 2 modules, VHF exciter and amp.
I am currently in the process of ording manuals for them, however I would
like to get the information now to get the units
Yahoo! Groups Links
To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an email to:[EMAIL PROTECTED]
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Kevin,
I downloaded the file from the location listed and checked the diagram out.
I have a question regarding the bottom of the 2 pictures.
1. If the level of either input is changed, will this alter the level of the
other input?
2. can one add extra inputs to the circuit, I want to use an cir
Hi,
Our repeater has had a dual-band (2/70) corner reflector sitting at our
repeater for about 9 years now. No real problems to report.
We are only at 1000ft, and the antenna is only about 20ft above group, but
the area does get hit with high winds. Have not had to do anything to it
over the time,
Hi All,
I have 2x GM-300 radios which I wish to use as a full duplex link at one of
our main repeater sites.
These radios are 8 ch ones, and I want to use the connector in the back of
the radio.
Could someone please advise of the correct way of wiring it up. Should
mention it will be going into a
Hi All,
Could someone please advise me on the lowest power setting a Mitrek 60watts
model can be?
I want to run one at around 10watts, but I have heard that some radios do
not like going down this. They become unstable.
I have 2m and 70cm units, 1 of each.
thanks in advance
Kevin.
Yahoo!
Do you know of any Computer based Spectrum analyser programs that would do
this job???
And Happy New Year to All, we are already 9 hrs gone.
Regards
Kevin, ZL1UDD
- Original Message -
From: "nj902" <[EMAIL PROTECTED]>
To:
Sent: Thursday, January 01, 2004 6:37 AM
Subject: [Repeater-Bui
This looks like it could be the result of a virus, I have received the same
message from 5 different sources so far.
Be careful, if it is genuine, sorry for the concern, but the same message,
sounds foul.
Kev.
- Original Message -
From: "Don" <[EMAIL PROTECTED]>
To:
Sent: Thursday, Decem
1 - 100 of 102 matches
Mail list logo
