Spadge wrote:
> Hi everyone.
>
> First up, some background:
>
> [EMAIL PROTECTED] uname -a
> FreeBSD tobermory.home 6.1-RELEASE FreeBSD 6.1-RELEASE #8: Tue May 9
> 21:04:02 BST 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/TOBERMORY
> i386
>
> [EMAIL PROTECTED] where pppoa
> pppoa-1.3.1,2 is
s try again, shall we?
>
>diff -ur speedtouch.orig/configure speedtouch/configure
>< the diff >
>
>
>
Hi Simon,
I am gona do a last check and merge it into the cvs !
Thanks a lot
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
Simon P Hawkins wrote:
>Hi Francois,
>
>This is what I have in my /etc/ppp/ppp.conf
>
>default:
> ident user-ppp VERSION (built COMPILATIONDATE)
> set log Phase Chat IPCP CCP tun command
>
>adsl:
> set authname [EMAIL PROTECTED]
> set authkey blahblahblah
> set device !"/usr/local/sbin/pppoa2 -vpi
#x27;' command fails due to an existing route, you can
overwrite the
existing route using:
PPP ON awfulhak> add! default HISADDR
I guess you can also cleanup the routing table in the ppp.linkdown, this
should work aswell.
Regards,
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
t
have much free time. So if someone is interested in taking over that job,
there is no problem. I can also give him some hints and help. Just let me
know !
Have Fun
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
Hi,
I commited a patch from Pawel Biernacki to support DragonFly BSD.
If anyone interested, it's in the CVS.
Have Fun,
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
is a problem with the current CVS and the latest
release. As far as the pppoa2 and modem_run compile properly you can
still use them.
I'll look into that.
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
>
> Jul 28 20:44:42 Minas_Tirith ppp[29748]: tun0: Phase: Parent: Child failed (errdead)
>
> ---
>
> Conclusion:
>
>
> Connection don't work...I don't have ideas...please help me :)
>
With the message you get, usually it's because pppoa2 doesn't stay in
background. It must exit for some reasons. The best would be configure
your syslogd to log pppoa2. So that you can see exactly what's going
on.
You should also remove the LQR stuff from the ppp.conf. It can create
some problems.
Regards,
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
as the mailing list
strips attachements.
If you wanna have fun with a dear windows user with a virus:
Received: from ml.free.fr (56.102-200-80.adsl.skynet.be [80.200.102.56])
by ml.free.fr (Postfix) with SMTP id 935E572E12
for <[EMAIL PROTECTED]>; Thu, 19 Feb 2004 06:59:38 +0100 (C
hould commit a patch soon (just the time to be back on a 5.2 and test
it).
best regards,
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
t in using the linux thread compatibility as a
thread library to link the project.
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
isn't supported with FreeBSD 4.8.
It only works with FreeBSD Current using the new lib KSE as a thread
library.
So you have to use pppoa2 and it should work. (If you really want
pppoa3 under 4.8, there might be a solution but not that easy).
regards,
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
erface: tun0
> Warning: Add route failed: 0.0.0.0/0: errno: No such process
> Child failed (errdead)
>
> Voilà :) Ca à le mérite de parraître simple comme erreur...
Salut,
Si tu pouvais sortir les logs de pppoa2, ca pourrait aider.
(grep pppoa2 sur /var/log ... devrait etre dans me
next time you could probably improve your communications skills and
seem a bit more involved when I ask you to test some patches that are
highly probable to break something.
Regards,
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
On Thu, Aug 28, 2003 at 06:59:15PM +0100, John Levon wrote:
>
> Missing closing braces.
>
> regards
> john
Thanks, forgot that one. Both are corrected (benoit already did on
pppoa2).
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire
ge rien au problème de
> Speedmgmt qui prend la main quand le modem se branche. Et
> j'ai essayé de lancer modem_run, il me dit qu'il ne peut
> pas accéder au modem car qqn est déjà dessus.
Pour desintaller le mieux c'est de reprendre la procedure d'install a
l&#x
essayer de donner une IP et tu veras bien.
Au passage je me demande qui c'est ce provideur ?
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
erface tap ou tun. Et
ensuite suivre n'importe howto PPPoE (y compris pour l'IP fixe) en
utilisant l'interface cree comme etant celle d'un modem ethernet.
Que l'on me corrige si c'est pas ca. En tout cas ca marche comme ca sous
BSD.
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
choice. You should either update to 5.1 or install
a 4.8. (btw 4.8 must handle dual processor).
Be sure to read the early adopter's guide:
http://www.freebsd.org/releases/5.1R/early-adopter.html
Regards,
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
2:31 Balrog ppp[10080]: tun0: Command: adsl: set device !pppoa2
> -vpi 8 -vci 35 -v 1
[...]
You should try to put the whole path for pppoa2 in the ppp.conf
Should be like /usr/local/sbin/pppoa2
Regards,
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
Does this mean that we are about to have a new beta?
>
> Thanks very much for your excellent work,
>
> Nuno Teixeira
>
I just commited the patch, probably a new beta will be avaible soon and
then a release as soon as the docs are updated.
Regards,
--
Francois
on to try this
patch.
just copy the patch to src and do: `patch pppoa2.c pppoa2.c.diff'
And let me know if pppoa2 is still working.
If you test the pppoe bridge let me know if it's also working.
Regards,
--
Francois Rogler
-- Attached file included as plaintext by Listar --
the 2nd patch I posted ?
Cause if it's working I'll commit the changes in the CVS (both pppoa3
and the makefile to use KSE) ... have to check first if it doesnt break
anything under linux. I would also add a config file for pppoe in the
docs.
Then probably we could have a new beta soon.
Regar
pain in the ass.
So to avoid that, I started to backport most of pppoe code in pppoa2
(fork version). I hope to have a version to test later in the week.
I'll send it to you.
keep going,
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
(kldload if_tap), that was
one of my problem at the beginning.
Regards,
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
Nuno Teixeira
Hi
Well the pb is that u r gona have to change the ppp.conf using the same
config as other pppoe modems and say the network interface is tap0.
And before launching the connection u have to launch pppoa3 in bridge
mode (that will open the tap interface)
--
Francois Rogler
Modifed patch ... should be ok this one.
--
Francois Rogler
-- Attached file included as plaintext by Listar --
Index: pppoa3.c
===
RCS file: /cvsroot/speedtouch/speedtouch/src/pppoa3.c,v
retrieving revision 1.30
diff -r1.30
man tap).
I'll also have a look to backport the pppoe bridge code in pppoa2.
Waiting for you feedback.
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
lready use it you can change it
manually in the pppoa3.c
So then you should be able to launch any pppoe client on it and connect.
Any feedback is welcome.
--
Francois Rogler
-- Attached file included as plaintext by Listar --
Index
On Tue, Apr 01, 2003 at 10:28:17PM +0200, Nicolas Ecarnot wrote:
>
> Le Tue, Apr 01, 2003 ? 12:40:47AM +0200, Francois Rogler a ?crit :
>
> > This feature consist in being able to relaunch modem_run when the modem
> > is already initialized ... else modem_run is being s
memory when
you power it down, would be too easy).
And the fact of killing manually modem_run doesn't mean that you can
relaunch it again as the modem is still initialised (so you need to
reset the modem ... this famous missing feature).
--
Francois Rogler
Liste de diffusion modem ALCATEL
eset function that isn't implemented and usefull only when
you try to launch modem_run twice (if you try to use the adsl.sh script
to connect and disconnect).
About the original post, I don't know anything about the power
management in OpenBSD.
--
Francois Rogler
Liste de diffusion modem ALCATEL
he modem it's initialized and you can simply put ppp stuff in the
adsl.sh
So could you explain me again why this missing feature is bothering you
so much ?
Regards,
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
We can do this together if you want as now I don't have a DSL
connection anymore so that I can't test it myself.
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
exists in the /dev
You can also bypass the modem search (which is faster) by adding in
pppoa2 line (in ppp.conf) -d /dev/ugen0
regards,
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
On Wed, Jan 22, 2003 at 12:57:09PM +, LeBaBouk wrote:
> Why pppoa3 don't give me anything ?
because it's not supported on freebsd. The threads doesnt work
correctly.
Concerning the LQR, you don't need it at all. Just disable it.
Regards.
--
Francois Rogler
Liste
not working when lqr is disabled. I'll try with the
> new FreeBSD 5.0 soon. And I'll give you feedback.
You can't get the same disconnection log if you disactivated LQR
But be carreful if u use freebsd 5, the speedtouch doesnt work on it. We
don't support it yet.
Regards
is with the nes devfs, maybe you can try to disable this.
regards.
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
us a log of the disconnection with the error message in it, this
would be more helpful.
Cya
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
LQR disabled, give me the new error
from ppp, but I think it should work fine now.
Regards.
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
s.
The best would be to get the new modem_run.c from the cvs (or the whole
cvs) on retry what you did.
Regards.
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
was on holidays (they finish in 3days).
So for your problem, did you check in the ppp.log what is the reason of
the disconnection ? is it pppoa2 that crash, ppp that disconnect because
of LQR or ?
Regards,
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
s
> and /etc/ppp/ppp.conf).
I think you should try to read the FAQ. Specially, a well known issue is
that pppoa2 that you put in the ppp.conf isn't in the path. You you HAVE
TO specify it manually (like /usr/local/sbin/pppoa2)
Regards
--
Francois Rogler
Liste de diffusion modem ALCATE
576 kbit/s
> down | 288 kbit/s up)
> Nov 23 12:32:12 gateway ppp[29573]: tun0: Warning: Add route failed:
> 0.0.0.0/0: errno: No such process
Did you check the FAQ ?
specially that generally you have to specify the whole path of pppoa2 in
the ppp.conf
--
Francois Rogler
Liste de d
nday a snapshoot will be available i guess.
Regards,
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
-v 1
If you are in france (as i think), the vci isn't 25 but 35.
I can't remeber any place using a vci of 25.
I don't see anyother problem. If the value is really 25, put pppoa a
little bit more verbose and post again.
Good luck (bonne chance)
--
Francois Rogler
Liste de
fined (__OpenBSD__))
There is also the same problem with the lastest version of openbsd ... i
think we should do a new version.
Regards,
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:speedtouch-request@;ml.free.fr?subject=unsubscribe
network device that does
> ethernet ?
One way of doing that could be to use a tap pseudo-device. (man 4 tap)
But it only exists under FreeBSD.
So i think that tun interface would be better as it works on all 3.
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscr
On Thu, Oct 10, 2002 at 01:23:54PM +0200, Odin wrote:
> Bonjour,
>
> dans la doc "Install Guide "pour les *BSD
> traduction fran?aise :
>
> "5. Connection"
>
> hum hum
>
> connexion en fran?ais !!!
c'est note et corrige (dsl pour les a
quer le chemin complet : genre /usr/local/sbin/pppoa2
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
vated enough to port another kind of modem ?
Maybe if you provide the modem (and some specs ?), few people could be
interested.
> Anyway, thank you for those who ported the Speedtouch under FreeBSD, it's
> wokring fine.
That was a pleasure :)
regards,
--
Francois Rogler
Liste
yone else is of similar interest please
>email me.
No, it doesn t work. You don't have the same USB stack on solaris. I
wanted to look at that some time ago, but i don't have USB neither PCI
on my Ultra 1.
You can try to port it if you want :)
regards,
--
Francois Rogler
Liste d
#x27;ipv6. Dans ce cas la faudrait qu'on voit ca.
> ppp[196] : tun0 error:tun_configure : ioctl(SIOCSIFMTU) Invalid Argument
Ca m'a l'air etrange ce message, tu n'as pas besion de redefinir le MTU
normallement (pas de MTU 1492 comme avec le pppoe).
--
Francois Rogler
lows it to compile correctly on NetBSD 1.6 and 1.5.
Commited, thanks David for contributing.
Best regards,
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
nterface");
return(-1);
}
(sorry i can't make a patch from here)
If someone can tell me if connection work with that, that would be fine.
I can test just modem_run (except sync) as i don't have anymore DSL
connection anymore.
If that's ok, i'll be add that to the cvs soo
y in uk) managed to
connect. I have no idea why we don't get anything coming from outside in
some case.
Maybe you can also try to use driver 1.0, if you can't compile, try to
replace the file pusb-bsd.c by the version of 1.1.
Feel free to give some feedback.
--
Francois Rogler
Lis
Hi,
did you add the syslog stuff to get pppoa2.log ?
you can also check that pppoa2 is in the path or specify the complete
path in ppp.conf
You MUST register the mail you use to send on the mailling list ... else
it get blocked.
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch
Hi
It seems that you have no traffic coming from the remote side. Maybe you
could try out with the microcode from the windows driver, some people in
uk couldn't get anyrhing from outside because of that. (so find and use
alcaudsl.sys instead of mgmt.o)
Regards,
--
Francois Rogler
Lis
adsl to work on bootup.
>
> If I allow the box to reboot fully, login as me, su to root and run the
>modem_run/ppp script everything works, but if I put the same call in
>/usr/local/etc/rc.d/adsl.sh, it doesn't work.
And if you launch the script manually ? does it work ?
--
nection, you can use ppp in ddial mode and it
works fine.
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
#x27;s
also better for your router as it will reconnect until you get a
connection.
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
e with it as it doesn't work. Anyway, he
didn't had to remove it so that the driver can compile.
> The BSD USB stuff I leave in the BSD hackers hands...
Thanks :-)
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
d.c and put it in speedtouch/src/pusb-bsd.c
Remember to be carefull with modem_run if you grab the whole CVS.
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
efault. Also the
> ugen devices are not created by default.
> (that's the feedback bit)
Yep thanks. Maybe i could include that in the default sample file.
(Under FreeBSD it works out of the box)
In fact i already included that some time ago in the FAQ.
--
Francois Rogler
Liste de diffusion
> but there were no pppoa2 messages, so I must have done something
> stupid!!
Try to specify the complete path to pppoa2 in your ppp.conf. That should
help.
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
or a release candidate, but i still need to
change some things on my side before a new release.
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
can do that today if you want.
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
: `make install' is also broken on BSD as you added some
SysV stuff ... and i don't need to tell you that SysV DOESN'T exsist
under BSD !! So the best would be to move that Linux specific stuff in
the Linux Makefile (the doc one). Moreover adsl.sh is in the doc.
--
Francois Rog
r. (j'ai
du moderer le message)
Ensuite, tu peux essayer de desactiver le LQR dans ta config de ppp.
Sinon je n'ai pas d'autre idée de l'origine de ce message.
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
tun0
Euh, ca risque d'etre genant ca ... mais reessaye d'abord de facon
"normale". Avec les bon fichiers de conf et sans lancer pppoa2 a la
main.
> Warning: No default entry found in config file.
> Apr 9 16:25:51 /netbsd: tun0: not multicast capable, IPv6 not enabled
>
face on my system?
I don't know PPPoE in openbsd, but don't imagine to try to connect using
directly the modem interface in /dev
I can't tell you more except trying to connect with PPPoA and hopefully
you will connect.
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
gt;
> Can anyone help me? Thank you,
You can now try to main part : connecting. (check that pppoa2 is in the
path, else specify the complete path to pppoa2 in ppp.conf)
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
a2 -vpi 8.35 -vci 8.35 -v 1 -d /dev/ugen0
il faut mettre : "-vpi 8 -vci 35" au lieu de "-vpi 8.35 -vci 8.35"
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
; have a look at the two files in /var/log. I didn't
> realise that pppoa2 and ppp use their own logs as
> well as the syslog stuff.
>
> Chris
which microcode do you use ?
Some people had problems under BSD with mgmt.o
You should better try with alcaudsl.sys (contact me if you
doublé avant recompilation et la compatibilité 386 et 486 supprimée )
>
> Je suis en train de faire récupèrer une version plus récente des sources
> d'openbsd pour voir si ces problèmes ont été résolus ou du moins minimisés,
> et je vous tiendrais au courant.
Envois plutot ca
;utilise personnellement depuis longtemps ddial
qui ne m'a jamais poser de problemes.
Si tu utilises le script que j'ai mis, tu n'auras pas de pb de
connections fantomes (sinon, penser a activer lqr).
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour s
b. Maybe you would have to put
PCI/USB card and plug a modem on each one.
As i remember, i managed to put a webcam and the modem on same onboard
usb. (webcam also use about 500ma). Everthing must depend on the usb
chipset ... don't need to say that VIA chipsets don't have a good
reputation
ai le fameux problème de reconnexion...
> > Tu penses que ca pourrais venir de là, que je devrais utiliser OHCI ?
Si t'es sous GNU/linux, c'est pas le probleme avec hdlc qu'il faut
patcher ?
Au fait nerVo, pour des réponses plus massives t'aurai du faire une
traduction en
hat the entries of the modem doesn't exists : you need to do
cd /dev && sh MAKEDEV ugen1
(Frequent problem)
> # modem_run -v 1 -m -d /dev/ugen0 -
> f /usr/local/libdata/mgmt.o -v 1 -m
Here you want to upload the microcode on your webcam ... no comment :)
--
Francois Rogler
L
On Thu, Dec 13, 2001 at 03:03:53PM +0100, nerVo wrote:
> Merci de repondre de maniere massive.
Moi j'ai utiliser une carte pci/usb 2ports (j'ai pu la boite) de chez
Xircom a base de puce Opti (OHCI). Ca marchait de facon tres stable,
avec néanmoins, un leger probleme sur les debits en cas d'upl
On Wed, Dec 12, 2001 at 01:32:52PM +0100, Jerome Rauch wrote:
> En réponse à Francois Rogler <[EMAIL PROTECTED]>:
> j'ai toujours le
> "Child failed (errdead)" !
>
> Voila le le /var/log/pppao2.log :
> -
(log correct)
> -
> Je
ant dans /etc/syslog.conf :
!pppoa2m
*.* /var/log/pppoa2.log
(le m a pppoa2m n'est pas une erreur)
puis : 'touch /var/log/pppoa2.log'
et enfin : killall -HUP syslogd
apres, tu te reconnectes et tu regardes quels sont les problemes
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
> > See topic
> > --
> > Edouard Gomez
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
reliable
> mobo.
If there is a VIA chipset ... then you have to be carefull. There is an
option in the bios that improve things with those chips (as people told
me) : Chip performance Optimal -> Normal
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
s from : few people don't manage to
receive data from the modem.
pppoa3 doesn't work at all under FreeBSD, i compile it just for tests.
> > > I used to use pppoa2 under 4.3-STABLE/4.4-RC and would
> > > experience occasional disconnection problems. (I have a DSL
>
ge in your bios
the system performance from optimal to normal.
When such a thing happen, to restart the connection without restarting
the computer, you can try (not tested) to : killall modem_run, then
modem_run ... then ppp. Or killall modem_run, unplug/plug the modem,
then start the connection as y
chipset and that linux stack resist better (eventhought bsd's
one is nicer :)
--
Francois Rogler
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
e
> child process running? Is that the intention?
Yes, that's the intention. We just keep reading it.
In fact we could read it in pppoa instead of modem_run. We had a long
talk with benoit about that and finally we decided to keep it in
modem_run. We except to improve modem_run so th
security issues fro incoming ppp connections.
That's it. There are also the files ppp.linkup and ppp.linkdown
You should try to launch pppoa2 adding the option : -d /dev/ugen0
You'll skip modem search with that, so maybe it could improve things.
--
Francois Rogler
Liste de diffusion mo
89 matches
Mail list logo
