Just to update the thread.
A basic CLI test showed it's not an issue related to anything in the
LDAP helpers or settings.
The issue was IPV6 network level issue, there was a default gateway but
for some unknown reason there was no IPV6 connectivity.
The test host could be any host with both
Hey Nando,
Can you test something?
On 25/01/2016 17:52, nando mendonca wrote:
external_acl_type
ldap_group %LOGIN /usr/local/squid1/libexec/ext_ldap_group_acl
-R -b "ou=groups,dc=gcsldap,dc=corp,dc=domain,dc=com" -D
Hi All,
I'm running squid 3.5.12, i'm using ldap for authentication. When trying to
browse the internet from clients it takes up to 10 minutes for the website
to load. Can you please assist me in troubleshooting what the issue is?
Below is my squid.conf file.
cache_mem 1048 MB
cache_log
On 10/10/2015 8:16 a.m., nando mendonca wrote:
> Hi Amos,
>
> Below is my squid.conf configuration. I can login and browse any site
> entering my ldap username. This is working fine.
>
> Below i would like to use squid_ldap_group -R to allow certain ldap groups
> to browse only certain sites.
On 8/10/2015 8:18 a.m., nando mendonca wrote:
> Hi,
>
> I have squid 3.1 installed using ldap authentication. When i access a
> browser i enter my ldap credentials and it works fine. I’m able to browse
> all sites without any issues.
>
>
> Is there a way to use ldap groups to allow certain
Hi,
I have squid 3.1 installed using ldap authentication. When i access a
browser i enter my ldap credentials and it works fine. I’m able to browse
all sites without any issues.
Is there a way to use ldap groups to allow certain groups access to a few
sites on the internet and then pretty much
On 25/06/2015 6:49 p.m., YogiBearNL aka Ronald wrote:
Squid v2.7:
Jun 25 08:36:37 proxy SQUID[16271]:
192.168.2.85 - - [25/Jun/2015:08:36:37 +0200] GET
http://tpc.googlesyndication.com/safeframe/1-0-2/html/container.html
HTTP/1.1 200 2439 http://tweakers.net/; Mozilla/5.0 (Macintosh; Intel
Dear Squid users,
I have a problem with Squid 3.1 on Debian
Squeeze.
squid3 -v
Squid Cache: Version 3.1.6
When I use the syslog
Log module for access_log the syslog lines have a funky program name
called (squid) i.s.o. squid.
This is different from syslog lines of
Squid v2. ( Squid Cache:
On 17/06/2015 10:11 p.m., Horváth Szabolcs wrote:
Hello!
We're having serious problems with a squid proxy server.
The good news is the problem can be reproduced at any time in our production
squid system.
Environment:
- CentOS release 6.5 (Final) with Linux kernel
Hi,
I am working on setting up Squid 3.1 with Tproxy using WCCP on Cisco 3550.
Configs that I am using is below
Router and Proxy both are on Public IPs, traffic coming in from clients are
also Public IP
But for some reason the Router Identifier IP is showing as Local IP which is
being used to
Hello,
I have the reverse proxy config as:
cache_peer 175.6.1.216 parent 80 0 no-query originserver name=caiyuan
acl resdomain dstdomain www.52caiyuan.com www.52huayuan.cn
52caiyuan.com 52huayuan.cn huayuan.52caiyuan.com
cache_peer_access caiyuan allow resdomain
When accessing to the
On 28/04/2013 8:55 p.m., Doug wrote:
Hello,
I have the reverse proxy config as:
cache_peer 175.6.1.216 parent 80 0 no-query originserver name=caiyuan
acl resdomain dstdomain www.52caiyuan.com www.52huayuan.cn
52caiyuan.com 52huayuan.cn huayuan.52caiyuan.com
cache_peer_access caiyuan
Hello,
# squid3 -k parse
2013/04/29 10:10:15| Processing Configuration File:
/etc/squid3/squid.conf (depth 0)
This is the info it gives.
2013/4/29 Amos Jeffries squ...@treenet.co.nz:
On 28/04/2013 8:55 p.m., Doug wrote:
Hello,
I have the reverse proxy config as:
cache_peer 175.6.1.216
Hi everyone,
is it possible to have squid use the same Source Port to connect to the Web=
server as the client uses to connect to squid ?
My problem is the following setup:
Various Citrix Server
URL Filtering with Identity Awareness
Squid 3.1 as Cache Proxy
I had to
On 10/23/2012 8:55 PM, alexander@heidelberg.de wrote:
Any help is appreciated:)
Best Regards
Alex
Take a peek at TPROXY.
if you can share your squid.conf you can get better help.
(notice that your email looks bad with lots of spaces)
Regards,
Eliezer
--
Eliezer Croitoru
On 24.10.2012 07:55, Alexander.Eck wrote:
Hi everyone,
is it possible to have squid use the same Source Port to connect to
the Web=
server as the client uses to connect to squid ?
No. One gets errors when bind() is used on an already open port.
connect() and sendto() do not supply the OS
On 20/09/2012 11:46 p.m., Bambang Sumitra wrote:
On Sep 20, 2012 5:12 PM, Amos Jeffries squ...@treenet.co.nz
mailto:squ...@treenet.co.nz wrote:
On 20/09/2012 7:03 p.m., Bambang Sumitra wrote:
Hi All,
I'am using Squid Cache: Version 3.1.19 on ubuntu 12.04, and i have
problem accessing
Hi All,
I'am using Squid Cache: Version 3.1.19 on ubuntu 12.04, and i have
problem accessing vmware.com, its never complete load, always showing
white blank page, i have try with different browser also, firefox,
chrome and IE
here is my squid config
-- squid
On 20/09/2012 7:03 p.m., Bambang Sumitra wrote:
Hi All,
I'am using Squid Cache: Version 3.1.19 on ubuntu 12.04, and i have
problem accessing vmware.com, its never complete load, always showing
white blank page, i have try with different browser also, firefox,
chrome and IE
here is my squid
Hi there,
we use Kemp loadbalancer for balancing proxy (active-backup). All
users has set IP of kemp loadbalancer. But in the squid access_log is
IP of the loadbalancer, I want there an IP of the user that is
accessing the web pages (we use webalizer for analyzing top browsing
users).
On 20.06.2012 22:40, Josef Karliak wrote:
Hi there,
we use Kemp loadbalancer for balancing proxy (active-backup). All
users has set IP of kemp loadbalancer. But in the squid access_log is
IP of the loadbalancer, I want there an IP of the user that is
accessing the web pages (we use webalizer
On 03.06.2012 22:23, alextouch wrote:
Hi
this is my first post... last month I installed a linux ubuntu server
12.04
LTS machine with Squid3 in my organization. This machine works as a
proxy
(not transparent proxy) for the web access from clients.
Proxy is connected to a gateway for internet
Hi
this is my first post... last month I installed a linux ubuntu server 12.04
LTS machine with Squid3 in my organization. This machine works as a proxy
(not transparent proxy) for the web access from clients.
Proxy is connected to a gateway for internet connection.
Clients are configured so
Hi all,
I'm busy working on a tproxy setup with the latest squid on Ubuntu
12.04; tproxy is enabled, squid is compiled with tproxy support etc.
The difference with this setup is that traffic is being sent to the
host using route-map on a cisco as opposed to WCCP but it seems that
should work.
On 5/05/2012 7:58 p.m., Dave Blakey wrote:
Hi all,
I'm busy working on a tproxy setup with the latest squid on Ubuntu
12.04; tproxy is enabled, squid is compiled with tproxy support etc.
The difference with this setup is that traffic is being sent to the
host using route-map on a cisco as
Hi all,
I'm busy working on a tproxy setup with the latest squid on Ubuntu
12.04; tproxy is enabled, squid is compiled with tproxy support etc.
The difference with this setup is that traffic is being sent to the
host using route-map on a cisco as opposed to WCCP but it seems that
should work.
Hi,
I'm experimenting with squid and a service I'm writing.
my service compute ETag and return it along with other Http headers:
Headers returned by a request to my service:
HTTP/1.1 200 OK
Content-Language: it
Cache-Control: public, max-age=60, s-maxage=60
ETag:
Dear
I have tested all log formats on my squid 3.1.19 and member information
still IP - -
eg: 192.168.1.212 - - [
Is it normal ?
I notice that using squid 3.2 log correctly members uid in access.log
Best regards
Hi.
I'm using squid 3.1.x on FreeBSD. Squid is built from ports.
Recently I was hit by a weird issue: my users cannot open HTTPS pages.
This is not something constant - if they hit the F5 button in browser,
the pages are loading, sometimes showing the message like 'Unable to
connect. Firefox
On 13.03.2012 22:10, Eugene M. Zheganin wrote:
Hi.
I'm using squid 3.1.x on FreeBSD. Squid is built from ports.
Recently I was hit by a weird issue: my users cannot open HTTPS
pages. This is not something constant - if they hit the F5 button in
browser, the pages are loading, sometimes showing
On 12/03/2012 6:53 p.m., kadvar wrote:
Hi,
I have searched for other posts with the same problem but the workarounds
that worked for them did'nt work for me. I am trying to configure a squid
reverse proxy with ssl support. I have squid on 192.168.124.41 with apache
on 127.0.0.1 on the same box.
Hi,
I have searched for other posts with the same problem but the workarounds
that worked for them did'nt work for me. I am trying to configure a squid
reverse proxy with ssl support. I have squid on 192.168.124.41 with apache
on 127.0.0.1 on the same box. I also have two other webservers (1
Good afternoon,
is it able to detect somehow (and disable) tunneling http regular
web thru proxy web sites ? For example porn web site thru
hidemyass.com. There are a lot of web proxies, couldn't locate
everyone and disable it :). How do you solve it ?
Thanks and best regards
J.K.
On 9/03/2012 1:01 a.m., Josef Karliak wrote:
Good afternoon,
is it able to detect somehow (and disable) tunneling http regular
web thru proxy web sites ? For example porn web site thru
hidemyass.com. There are a lot of web proxies, couldn't locate
everyone and disable it :). How do you
Hallo, Josef,
Du meintest am 08.03.12:
is it able to detect somehow (and disable) tunneling http regular
web thru proxy web sites ? For example porn web site thru
hidemyass.com. There are a lot of web proxies, couldn't locate
everyone and disable it :). How do you solve it ?
I use
Thanks Amos,
Currently, we use a VM ( vmware) to host a RHEL with squid running.
I change the back-end site with only an IIS test web site which is
hosted on the same IIS system.
And it's just a png image file. And it seem working.
On RHEL side, there is no limitations on outgoing on iptables
Jeffries
Cc: squid-users@squid-cache.org
Oggetto: Re: [squid-users] squid 3.1.x with IIS SharePoint as back-end.
Thanks Amos.
I did the lynx test on back-end web site on squid system like this:
sudo lynx http://wtestsm1.asiapacific.hpqcorp.net
First, it show the message:
Alert!: Invalid
On 11/01/2012 8:46 p.m., kimi ge(巍俊葛) wrote:
Thanks Amos.
I did the lynx test on back-end web site on squid system like this:
sudo lynx http://wtestsm1.asiapacific.hpqcorp.net
First, it show the message:
Alert!: Invalid header 'WWW-Authenticate: NTLM'
Then it show the following message.
Show
Hi Amos,
Really appreciate your help.
I did changes with your sugguestion.
Some debug logs are here:
2012/01/11 13:21:58.167| The request GET http://ids-ams.elabs.eds.com/
is ALLOWED, because it matched 'origin_servers'
2012/01/11 13:21:58.168| client_side_request.cc(547)
clientAccessCheck2:
On 12.01.2012 02:28, kimi ge wrote:
Hi Amos,
Really appreciate your help.
I did changes with your sugguestion.
Some debug logs are here:
2012/01/11 13:21:58.167| The request GET
http://ids-ams.elabs.eds.com/
is ALLOWED, because it matched 'origin_servers'
2012/01/11 13:21:58.168|
Hi,
I have an issue to make squid 3.1.x to work with IIS SharePoint as the
back-end.
The details are listed below.
1. squid 3.1.x is running as a reverse-proxy.
2. The back-end is IIS SharePoint Site with domain authentication required.
That means only the valid domain user could access this
On 11/01/2012 6:28 p.m., kimi ge(巍俊葛) wrote:
Hi,
I have an issue to make squid 3.1.x to work with IIS SharePoint as the
back-end.
The details are listed below.
1. squid 3.1.x is running as a reverse-proxy.
2. The back-end is IIS SharePoint Site with domain authentication required.
That
Thanks Amos.
I did the lynx test on back-end web site on squid system like this:
sudo lynx http://wtestsm1.asiapacific.hpqcorp.net
First, it show the message:
Alert!: Invalid header 'WWW-Authenticate: NTLM'
Then it show the following message.
Show the 401 message body? (y/n)
For the domain
Hi there,
We may plan to active authorization for users to the internet
against Windows AD, running on Windows server 2008R2. I'm running
squid on opensuse 11.4 64-bit. I've found some how-to, many of them
solve it by ntlm-auth (not in opensuse, but there is a similar named
On 19/12/2011 9:00 p.m., Josef Karliak wrote:
Hi there,
We may plan to active authorization for users to the internet
against Windows AD, running on Windows server 2008R2. I'm running
squid on opensuse 11.4 64-bit. I've found some how-to, many of them
solve it by ntlm-auth (not in
Hi,
I use 64-bit machine, HP DL380 G7. I thought that it should be
better to use tmpfs (part of the memory). After reboot it is clean and
empty, squid creates directories again automaticaly.
So you recommend use a few of disk capacity and set caching to memory only ?
Thanks
J.K.
On 2/12/2011 11:10 p.m., Josef Karliak wrote:
Hi,
I use 64-bit machine, HP DL380 G7. I thought that it should be
better to use tmpfs (part of the memory). After reboot it is clean and
empty, squid creates directories again automaticaly.
So you recommend use a few of disk capacity and set
Hi there,
I wanna use tmpfs for squid cache, is 8GB enough or too big ? We've
about 3000 computers behind squid, for OS is 16GB sufficient, that's
why I used 8GB for squid tmpfs.
Thanks for answers.
J.K.
--
Ma domena pouziva zabezpeceni a kontrolu SPF (www.openspf.org) a
On 01.12.11 15:05, Josef Karliak wrote:
I wanna use tmpfs for squid cache, is 8GB enough or too big ? We've
about 3000 computers behind squid, for OS is 16GB sufficient, that's
why I used 8GB for squid tmpfs.
what is the point of using tmpfs as squid cache? I think using only memory
cache
On 2/12/2011 5:13 a.m., Matus UHLAR - fantomas wrote:
On 01.12.11 15:05, Josef Karliak wrote:
I wanna use tmpfs for squid cache, is 8GB enough or too big ? We've
about 3000 computers behind squid, for OS is 16GB sufficient, that's
why I used 8GB for squid tmpfs.
what is the point of using
Hi,
our setup is:
Firefox 7.0.1, Squid 3.1.16 and Sharepoint Server on IIS.
In Firefox we've set already:
network.automatic-ntlm-auth.trusted-uris to the server address
network.automatic-ntlm-auth.allow-proxies = true (default)
in squid.conf, we've tried some combinations of the following
On 9/11/2011 1:11 a.m., Bartschies, Thomas wrote:
Hi,
our setup is:
Firefox 7.0.1, Squid 3.1.16 and Sharepoint Server on IIS.
In Firefox we've set already:
network.automatic-ntlm-auth.trusted-uris to the server address
network.automatic-ntlm-auth.allow-proxies = true (default)
in squid.conf,
forwarded_for off
pipeline_prefetch off
ignore_expect_100 on
Regards, Thomas
-Ursprüngliche Nachricht-
Von: Amos Jeffries [mailto:squ...@treenet.co.nz]
Gesendet: Dienstag, 8. November 2011 13:45
An: squid-users@squid-cache.org
Betreff: Re: [squid-users] Squid 3.1 NTLM Passthrough (SSO) to IIS
ignore_expect_100 on
Regards, Thomas
-Ursprüngliche Nachricht-
Von: Amos Jeffries [mailto:squ...@treenet.co.nz]
Gesendet: Dienstag, 8. November 2011 13:45
An: squid-users@squid-cache.org
Betreff: Re: [squid-users] Squid 3.1 NTLM Passthrough (SSO) to IIS with
Firefox
On 9/11/2011 1:11 a.m
I am doing extended testing of a CentOS v6 TPROXY/SQUID3/WCCP setup and
I noticing higher than usual TCP_MISS/502 codes. I am also seeing some
206 codes, but it is the 502s that are much higher than normal. I think
it is transport related inside the TPROXY/SQUID side of things but I am
not sure.
[mailto:nicholas.rit...@americantv.com]
Sent: Friday, July 22, 2011 11:16 AM
To: squid-users@squid-cache.org
Subject: [squid-users] squid 3.1 (w/ TPROXY/WCCP) and increased 502 and
206 codes
I am doing extended testing of a CentOS v6 TPROXY/SQUID3/WCCP setup and
I noticing higher than usual TCP_MISS
Hello!
We use Squid 3.1.12 on a couple of servers with IPv4 and IPv6.
The servers are FreeBSD 8.1. Squid is installed from ports.
This works fine, except for this web: www.informator.se
www.informator.se has an address, but it doesn't seem to
listen to it. Eventually the browser times out
On 23/06/11 01:44, Peter Olsson wrote:
Hello!
We use Squid 3.1.12 on a couple of servers with IPv4 and IPv6.
The servers are FreeBSD 8.1. Squid is installed from ports.
This works fine, except for this web: www.informator.se
www.informator.se has an address, but it doesn't seem to
listen
On 11/06/11 05:39, Shenavandeh wrote:
Hi,
I have a squid installation that crashes twice a day under the load of
7 Mbps bandwidth with the following message in squid.out with no
specific traces in cache.log
Startup: Fri Jun 10 15:46:20
dying from an unhandled exception: !theConsumer
terminate
Hi Amos,
Thanks for your time and nice comments on the config file
It is impossible for me to use debug_options ALL,6 under such load.
log file grows wildly and easily eats the whole hard disk !
Any other solutions to capture the log?
Yours Faithfully,
---
Amir H Shenavandeh
On 11 June
On 12/06/11 06:28, Shenavandeh wrote:
Hi Amos,
Thanks for your time and nice comments on the config file
It is impossible for me to use debug_options ALL,6 under such load.
log file grows wildly and easily eats the whole hard disk !
Any other solutions to capture the log?
There are two
Hi,
I have a squid installation that crashes twice a day under the load of
7 Mbps bandwidth with the following message in squid.out with no
specific traces in cache.log
Startup: Fri Jun 10 15:46:20
dying from an unhandled exception: !theConsumer
terminate called after throwing an instance of
Hi,
I'm using Squid 3.1.12.1 (Amos ppa-maverick) and i got some weird problem.
Users with Android2 can't get 'ebuddy' to work, but for iPhone users,
it works. (?)
I've made an exception on firewall (for 38.99.73.0/24) to ebuddy
connections skip squid, now it works for both.
Anyone know
On 26/04/11 12:19, Gerson Barreiros wrote:
Hi,
I'm using Squid 3.1.12.1 (Amos ppa-maverick) and i got some weird problem.
Users with Android2 can't get 'ebuddy' to work, but for iPhone users,
it works. (?)
I've made an exception on firewall (for 38.99.73.0/24) to ebuddy
connections skip
Site looks okay from here.
http://redbot.org/?descend=Trueuri=http://itinerari.mondodelgusto.it/
Of course, there is no page content. Just a flash media object and a
stat counter.
So there could be something broken in the site code where the HTTP
tools can't identify.
Hi Amos,
thank
On 24/03/11 23:44, Francesco wrote:
Site looks okay from here.
http://redbot.org/?descend=Trueuri=http://itinerari.mondodelgusto.it/
Of course, there is no page content. Just a flash media object and a
stat counter.
So there could be something broken in the site code where the HTTP
* do they get an HTTP error message from squid loading the base page
HTML object?
* does the flash object get pulled in okay?
- we can look at these and see what is broken if either is a bad
transfer.
Hi Amos, and thank you again!
The answer is generated by squid and it is: Zero
Hello,
some website, perhaps not compliant with W3C standard?, are not accessible
by users with Squid proxy set into browser's connection.
For example, one of this is: http://itinerari.mondodelgusto.it
It waits for some seconds, and then the connections hangs...
Is there a workaroung, bugfix?
On Mon, 21 Mar 2011 13:42:47 +0100 (CET), Francesco wrote:
Hello,
some website, perhaps not compliant with W3C standard?, are not
accessible
by users with Squid proxy set into browser's connection.
For example, one of this is: http://itinerari.mondodelgusto.it
It waits for some seconds, and
Hi,
I'm trying squid 3.1.10 with ntlm and kerberos. The kinit, klist
process works good even net join is working. The problem im facing is
when trying to start winbind service and using wbinfo. Always the
service is not starting giving the error message
lib/util_sock.c:1771(create_pipe_sock)
Hello,
by activating SSL bump in Squid 3.1, is it possible to transparent proxy
https request?
I have read some documentation and posts, but i have not clear if it
possible, with browser warning, or not...
Any workaround/ideas?
Thank you!
Francesco
On Tue, 8 Mar 2011 17:10:43 +0100 (CET), Francesco wrote:
Hello,
by activating SSL bump in Squid 3.1, is it possible to transparent
proxy
https request?
No. It is not.
I have read some documentation and posts, but i have not clear if it
possible, with browser warning, or not...
Any
worked a treat with version 2.6, but 2.7,
3.0 and 3.1 all make the reverse proxy really slow.
Many thanks
Gordon
-Original Message-
From: Amos Jeffries
Sent: Monday, February 28, 2011 9:38 PM
To: squid-users@squid-cache.org
Subject: Re: [squid-users] Squid 3.1 reverse proxy to OWA on IIS7
.
Many thanks
Gordon
-Original Message-
From: Amos Jeffries
Sent: Monday, February 28, 2011 12:19 AM
To: squid-users@squid-cache.org
Subject: Re: [squid-users] Squid 3.1 reverse proxy to OWA on IIS7
On Sun, 27 Feb 2011 17:19:33 -, Gordon McKee wrote:
Hi
I had FreeBSD 6.3 and squid
On Mon, 28 Feb 2011 16:18:27 -, Gordon McKee wrote:
Hi
The GET / HTTP/1.1 returns:
GET / HTTP/1.1
Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, */*
Accept-Language: en-us
Accept-Encoding: gzip, deflate
User-Agent: Mozilla/4.0 (compatible; MSIE 5.5; Windows NT 5.0)
Host:
Hi
I had FreeBSD 6.3 and squid 2.6 running fine reverse proxying my OWA server.
I have now upgraded to FreeBSD 8 and squid 3.1 as the old software was
getting rather old. I have copied the config file off the old server on the
the new server. All is working except OWA. The images come down
On Sun, 27 Feb 2011 17:19:33 -, Gordon McKee wrote:
Hi
I had FreeBSD 6.3 and squid 2.6 running fine reverse proxying my OWA
server. I have now upgraded to FreeBSD 8 and squid 3.1 as the old
software was getting rather old. I have copied the config file off
the old server on the the new
I am running squid 3.1.9, and I would like to know if this version is
able to cache youtube content?
I did check the wiki
(http://wiki.squid-cache.org/ConfigExamples/DynamicContent/YouTube)
and I must say that it is not clear what bits applies to version 3.1.
Can somebody give me some pointers
Le mercredi 2 février 2011 09:49:23, Clemente Aguiar a écrit :
I am running squid 3.1.9, and I would like to know if this version is
able to cache youtube content?
I did check the wiki
(http://wiki.squid-cache.org/ConfigExamples/DynamicContent/YouTube)
and I must say that it is not clear
Qua, 2011-02-02 às 10:01 -0600, Luis Daniel Lucio Quiroz escreveu:
Le mercredi 2 février 2011 09:49:23, Clemente Aguiar a écrit :
I am running squid 3.1.9, and I would like to know if this version is
able to cache youtube content?
I did check the wiki
No need for ICAP , storeurl script should be enough.
The problem is that youtube internal links are changing from time to
time, so we need to update our scripts from time to time.
On Wed, Feb 2, 2011 at 8:23 PM, Clemente Aguiar
ca-li...@madeiratecnopolo.pt wrote:
Qua, 2011-02-02 às 10:01 -0600,
Le mercredi 2 février 2011 12:29:58, Hasanen AL-Bana a écrit :
No need for ICAP , storeurl script should be enough.
The problem is that youtube internal links are changing from time to
time, so we need to update our scripts from time to time.
On Wed, Feb 2, 2011 at 8:23 PM, Clemente Aguiar
-users] Squid 3.1 youtube caching
Le mercredi 2 février 2011 12:29:58, Hasanen AL-Bana a écrit :
No need for ICAP , storeurl script should be enough.
The problem is that youtube internal links are changing from time to
time, so we need to update our scripts from time to time.
On Wed, Feb 2, 2011
On Thu, 3 Feb 2011 10:03:03 +0530, Saurabh Agarwal
saurabh.agar...@citrix.com wrote:
Hi Luis
I have recently successfully cached youtube videos using
Squid-2.7.Stable7
and posted the solution on squid mailing list as well. I tested it
yesterday and youtube videos were still being cached.
Dear all,
I have a problem of installing of squid-3.1.8-1
when I installed 'squid' on Redhat 5.2, I had the erre message in
cache.log, Failed dependencies: per (DBI) is needed by
squid-3.1.8-1.el5.x86_64.
Please, let me know its reason.
best regards. J.
I think that you must just install the package Perl::DBI and you're done.
LeaL
Dear all,
I have a problem of installing of squid-3.1.8-1
when I installed 'squid' on Redhat 5.2, I had the erre message in
cache.log, Failed dependencies: per (DBI) is needed by
squid-3.1.8-1.el5.x86_64.
On Wed, Dec 01, 2010 at 11:40:52AM +, Graham Keeling wrote:
Hello,
I am convinced that this is a serious bug, so I have entered a proper bug
report.
It is bug 3113:
http://bugs.squid-cache.org/show_bug.cgi?id=3113
I have created a simple patch that seems to fix the problem for me
Hello,
I am convinced that this is a serious bug, so I have entered a proper bug
report.
It is bug 3113:
http://bugs.squid-cache.org/show_bug.cgi?id=3113
On 30/11/10 04:04, Oguz Yilmaz wrote:
Graham,
This is the best explanation I have seen about ongoing upload problem
in proxy chains where squid is one part of the chain.
On our systems, we use Squid 3.0.STABLE25. Before squid a
dansguardian(DG) proxy exist to filter. Results of my tests:
1-
On Tue, Nov 30, 2010 at 10:05 AM, Amos Jeffries squ...@treenet.co.nz wrote:
On 30/11/10 04:04, Oguz Yilmaz wrote:
Graham,
This is the best explanation I have seen about ongoing upload problem
in proxy chains where squid is one part of the chain.
On our systems, we use Squid 3.0.STABLE25.
On 30/11/10 21:23, Oguz Yilmaz wrote:
On Tue, Nov 30, 2010 at 10:05 AM, Amos Jeffriessqu...@treenet.co.nz wrote:
On 30/11/10 04:04, Oguz Yilmaz wrote:
Graham,
This is the best explanation I have seen about ongoing upload problem
in proxy chains where squid is one part of the chain.
On our
--
Oguz YILMAZ
On Tue, Nov 30, 2010 at 10:46 AM, Amos Jeffries squ...@treenet.co.nz wrote:
On 30/11/10 21:23, Oguz Yilmaz wrote:
On Tue, Nov 30, 2010 at 10:05 AM, Amos Jeffriessqu...@treenet.co.nz
wrote:
On 30/11/10 04:04, Oguz Yilmaz wrote:
Graham,
This is the best explanation I
On Tue, Nov 30, 2010 at 09:46:47PM +1300, Amos Jeffries wrote:
On 30/11/10 21:23, Oguz Yilmaz wrote:
On Tue, Nov 30, 2010 at 10:05 AM, Amos Jeffriessqu...@treenet.co.nz wrote:
On 30/11/10 04:04, Oguz Yilmaz wrote:
Graham,
This is the best explanation I have seen about ongoing upload
On Tue, Nov 30, 2010 at 11:31:45AM +, Graham Keeling wrote:
On Tue, Nov 30, 2010 at 09:46:47PM +1300, Amos Jeffries wrote:
On 30/11/10 21:23, Oguz Yilmaz wrote:
On Tue, Nov 30, 2010 at 10:05 AM, Amos Jeffriessqu...@treenet.co.nz
wrote:
On 30/11/10 04:04, Oguz Yilmaz wrote:
Graham,
This is the best explanation I have seen about ongoing upload problem
in proxy chains where squid is one part of the chain.
On our systems, we use Squid 3.0.STABLE25. Before squid a
dansguardian(DG) proxy exist to filter. Results of my tests:
1-
DG+Squid 2.6.STABLE12: No problem of
On Thu, Nov 25, 2010 at 04:36:49PM +, Graham Keeling wrote:
Hello,
I have upgraded to squid-3.1 recently, and found a change of behaviour.
I have been using dansguardian in front of squid.
It appears to be because squid now buffers uploaded POST data slightly
differently.
In versions
Hello,
I have upgraded to squid-3.1 recently, and found a change of behaviour.
I have been using dansguardian in front of squid.
It appears to be because squid now buffers uploaded POST data slightly
differently.
In versions 3.1, it would take some data, send it through to the website,
and then
Hi List,
At last I could get the MRTG running with squid 3.1.8, though it took
much time. Will be writing a howto soon regarding how to set up mrtg
on FreeBSD.
It was the SNMP_util.pm gave all the trouble as the port maintainers
did some changes of merging. Those who are breaking head with mrtg
It's well worth upgrading to 3.1.8. Many of the 3.1 betas had broken SNMP.
Also check that the squid.mib being loaded came from the 3.1 install.
We now have a full map of what the OID are and what versions they work
for. You may find this useful:
Hi List,
I am trying to get mrtg graphing of my squid box running freebsd 7.2
with squid 3.1.0.13, I was able to get the mrtg while running 2.6
version of squid, but once moved to 3.1 version, I am not able to get
the mrtg graph at all, I would greatly appreciate if any
suggestions/clues what
1 - 100 of 195 matches
Mail list logo