This is great news. Is Logitech likely to include the changes in the
Touch's firmware?
audiomuze's Profile: http://forums.slimdevices.com/member.php?userid=33613
View this thread:
It is exactly 4 hours off.
Time zone is correct, router time is correct. Reboot doesn't fix.
Any ideas?
Thanks
lunchmoney's Profile: http://forums.slimdevices.com/member.php?userid=50760
View this thread:
Your router shouldn't make a difference.
If you are using mysqueezebox com:
Logon on to mysqueezebox.com and check the time settings there.
If you have installed software on the pc to play music off your hard
disk, please go to that PC and make sure it's time zone settings are
correct.
Hi everyone,
After 3 years I have decided to sell out my Squeezebox Duet and I have
bough a Squeezebox Touch which is connected to a Little Dot DAC. I use
IPengHD on my iPad to control my system. I have got Squeezebox server
installed on my laptop and all my FLAC files are installed on 1TB USB
settings at mysqueezebox.com and on my pc are both correct
any other ideas?
lunchmoney's Profile: http://forums.slimdevices.com/member.php?userid=50760
View this thread:
thanks chaps.
ive been away and just come back now so trying again. unfortunately
neither address is working!! and neithers my old favourites link
either.
ive checked the connection, and its fine. itll also play my music
stored on laptop, so theyre talking to each other. but when i try any
1) Unless there is some serious issues with your Wi-Fi, like
interference that would cause drop-outs, then I don't see any reason why
it would sound different.
2) That's up to personal preference. If you've already got a PC then
you don't need to spend money for a NAS, unless you want the
See also 'Thread: Reasons to move player to wired ethernet?'
(http://forums.slimdevices.com/showthread.php?94634-Reasons-to-move-player-to-wired-ethernet)
Soulkeeper's Profile:
There are many here who like the Vortexbox. Just be careful of other
NAS devices. Not all,but many do not have sufficient power to run LMS
effectively.
dasmueller's Profile:
Describe your setup - model of player, wifi, server etc.
Are you using a local LMS ?
Is your player connected to the local LMS ?
Where (LMS or Mysb.com) have you stored the 6Music favorite ?
On your Touch - check Settings/Adanced/Diagnostics/Server Info - any
thing which does not have OK
If you have LMS on a computer on your network the Touch will get it's
time from that computer, as long as you are connected to the server on
that computer.
A time issue can occur depending on how the time on the computer is set.
There are two ways time can be set on a computer:
time of the
JohnSwenson wrote:
The Touch does support IR blaster through the headphone jack just like
the SB3. With the current firmware it's not as capable since it does not
support raw mode in the IR blaster plugin. If you already have the
correct information for your amp and use it with the SB3 IR
Hello!
I have a setup with a ReadyNAS Ultra with a fixed IP address, a SB
Touch connected with Ehternet to the NAS. I also use the Duet Controller
instead of the Touch remote.
When I connect new PCs to my network, they usually conflict with
each other or the SB addresses. That's why I moved the
Yes, cross-posting should be avoided. I answered in 'your other thread'
(http://forums.slimdevices.com/showthread.php?94924-Change-IP-address-of-the-Duet-Controller).
Soulkeeper's Profile:
The SB Controller (SBC) and Touch are different network devices, and
therefore must have different IP addresses. So if they have the same IP
address, that's a problem for sure.
Just to rule out a possible source of the problem, you are using only
one router, right?
If you have only one router
albertone74 wrote:
Many thanks for your kind responses. I am vey happy with my sistem and
it is working great without no drop-outs at all. I must admit that I was
tempted by the ethernet connection as I have read somewhere in this
forum that the wired connection 'sounds' better than the WIFI
albertone74 wrote:
I must admit that I was tempted by the ethernet connection as I have
read somewhere in this forum that the wired connection 'sounds' better
than the WIFI one as from a streaming perspective there are two wireless
hops: First data from the server/PC to the router (via the
Hi Triode,
Any plans for making 192K available on the I2S/analog side?
Thanks, Jack
JIJ3's Profile: http://forums.slimdevices.com/member.php?userid=36534
View this thread:
Soulkeeper wrote:
Try Settings - Advanced - Applet Installer.
Uncheck Recommended Applets Only.
See if you find something related to highlight colors. I can't check my
Touch right now, I only have SqueezePlay to play with, but IIRC there
should be something there ...
They are under the
ply3908 wrote:
They are under the Patch Installer. But available for SB Radio only,
not for SBT (wondering why.)
Most likely because the author did not have anything but a radio to test
on.
Mnyb's Profile:
If one turn of all dhcp and then try to setup it's networking, it will
then fail and then offer manual settings aka static ip .
Mnyb's Profile: http://forums.slimdevices.com/member.php?userid=4143
View this thread:
TechHome wrote:
Thanks John, the Touch now feeds an Audiosource power amp with signal
sensing on the input, but it's good to know this now works. Can you
please explain what raw mode is? I used the IR signal capture feature
of IR Balster to record the codes; will these codes work? BTW, in
Baronvonkarp wrote:
When I start a 24/192 song it starts correctly, after 5 to 10 seconds it
stops one second (no sound) and after that it continuous. When I listen
to the whole album everything goes fine (except for the first song). But
when I skip to the next song () then it happends
audiomuze wrote:
This is great news. Is Logitech likely to include the changes in the
Touch's firmware?
I have discussed with Logitech, but at present I don't think they see
sufficient marketing demand for these features and they represent too
big a change for me to sneak them in as there
Triode wrote:
I believe this is due to insufficient data being buffered before
playback starts - which suggests a combination of high bitrate and a
constrained network bandwidth. Is this on a wired or wireless network?
It is over wifi, I also think it has something to do with the bandwith,
JohnSwenson wrote:
The Touch has a large buffer which it fills over the network connection
from the server. When you first start playing a song, or skip to a new
song it has to start filling that buffer from scratch. If your server
has a slow disk or the network connection is slow it can
Baronvonkarp wrote:
thanks for the explanation. I use a WD usb drive on my server (hp i7 6
gb) i will try your suggestions. I also have a WD 2tb networkdrive. I
will try itfrom that disk also. Again thanks.
What OS is your server running on - you could try tweeking the minimum
output buffer
Triode wrote:
I need to try this again - according to the imx35 reference manual there
is a divider which should be able to be programmed to change the clock
rate, but when I tried it didn't appear to work. I don't have access to
test gear to look at the lock rates coming out of the imx35
hmmm seem to be having problems with the server on the laptop now. the
server isnt showing in the system tray. i right click the control panel
in start menu and runas administrator but it keeps saying i havent got
privileges etc etc much as before. says the server is running but i
cant see it.
Hello,
I connect the leema dac to squeezebox. The info of the dac on the screen
are:
Status : stop
Speed high
Connection direct
Type async
Format s32_le
Rate 32000 -192 khz
When i play a title nothing happends.
The dac tells me the status stop and the title does not play.
The dac works fine
skydl wrote:
Hello,
I connect the leema dac to squeezebox. The info of the dac on the screen
are:
Status : stop
Speed high
Connection direct
Type async
Format s32_le
Rate 32000 -192 khz
When i play a title nothing happends.
The dac tells me the status stop and the title does not
Baronvonkarp wrote:
When I start a 24/192 song it starts correctly, after 5 to 10 seconds it
stops one second (no sound) and after that it continuous. When I listen
to the whole album everything goes fine (except for the first song). But
when I skip to the next song () then it happends
Triode wrote:
Does this sac work with Linux desktops. Are you able to login to the
touch and see what dmesg says?
Leema says the followng:
The product operates in asynchronous mode and supports all sample rates
from 32kHz to 192kHz via a high-speed USB interface. A driver is
supplied for
SBGK wrote:
you could try a periodcount=4 and alsa buffer time of 10 us, this
means the frame size is 1/4 of the buffer size (1024/4096) instead of
1/2 (1024/2048) and also means the buffer refresh rate is .1s instead of
.02s or what ever buffer size you have, so you have a better chance
aubuti wrote:
Several good FLAC to MP3 converters will happily pick up a folder.jpg or
cover.jpg file from the FLAC folder and embed it in the MP3 file. I know
that dBpoweramp Batch Converter will do this, and I think the latest
version of Robin Bowes' flac2mp3.pl script will as well. I
I suppose when you embed ex post the operation takes a long time because
it is rewriting each and every file into which you are embedding album
art. With typical FLAC file sizes of 30-60MB that takes some time. And
if you're doing it over the network to the Vortexbox it takes even
longer.
JohnSwenson wrote:
I'm not an expert on IR Blaster, I've tested it to make sure it works
but that is as far as I've gotten. If my understanding is correct raw
mode is very low level information on how the IR beam is modulated. But
this is a large sequence of information for each button.
Hi Triode,
Thanks for the wonderful tweak which make playing high-res files much
more better without the limitation of 24/96 via coaxial.
I did try the USB connection to my Antelope Eclipse 384 DAC, I choose
High Speed USB 2.0 in the DAC, when the Touch reboot it can only reach
the Free Your
Hi,
I recently had a few troubles with TinyLMS. After tracking it down,
it was due to a corruption of the FAT filesystem. This confirm what I
said about backups in section (6), you can not fully trust those hard
drives.
1) Symptoms
-
The first thing I noticed is that I was not able
39 matches
Mail list logo