rmac321 wrote:
>
> questions for the gurus:
> does it matter if the modprobe command is preceded by a sudo when in the
> /opt/bootlocal.sh file?
> I've done it both ways and both ways get the modules started.
> Is that the correct script to put them into so they get called in time?
> why does ls
paul- wrote:
> /opt/bootlocal.sh is ran as root, so it doesn't matter. I have no idea
> about spi, I don't use it.
Thanks Paul,
That was my guess re sudo in bootlocal.sh.
I appreciate all the help you've provided - especially considering it is
something you don't use! All of you guys working o
palmerx wrote:
> Yes its true in my case it would also be card 1 and this is missing. I'm
> sorry to ask but how do I edit asoud.conf? I was able to read it with
> WinSCP but the changes are lost after reboot.
> With Putty I could not edit it because of nano was not working...
>
> Thanks for the
hi palmerx,
The backup command is "sudo filetool.sh -b" not "sudo filetool.sh-b".
It's may be easier to use $pcp bu. Type $pcp for a list of common
commands.
When using winSCP you are usually logged in as "tc", so you will get
file permissions issues on certain files. You can step up access to
re: enc28j60 setup
I've made a bit more progress. The module does work in pCP. Using
ifconfig I can get the module on the LAN, but only in a limited fashion.
If I add "ifconfig eth0 up" to /opt/bootlocal.sh the link is reported
to be up in dmesg, but it still doesn't work. The startup reports "
By manually running udhcpd.
Take a look at the startup scripts. /etc/init.d/tc-config. Network
setup is near the end.
paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858
View this thread: http://foru
paul- wrote:
> By manually running udhcpd. Take a look at the startup scripts.
> /etc/init.d/tc-config. Network setup is near the end.
I'll dig into that today and see what I can figure out.
Is the best way to educate myself on the structure of pCP going to be
found on the tinycore website?
There is nothing in common between Raspbian and piCore, except they are
Linux based.
This is probably the best place to start
http://tinycorelinux.net/book.html
paul-'s Profile: http://forums.slimdevices.com/member.php
paul- wrote:
> There is nothing in common between Raspbian and piCore, except they are
> Linux based.
Paul,
Yes, I'm clearly finding out just how different it is. I've finally
gotten pretty comfortable living in a Debian world, so Raspbian has been
very friendly - learning wise. pCP and tin
I am running the latest version piCoreplayer on a Raspberry pi 3 with
jivelite. It is connected to my network through ethernet via a wi-fi
AC750 bridge. If I play an album proper it will play straight through
without any issues. If I play a playlist with songs (99% ALAC) from
different director
paul- wrote:
> Yes, you can do that. Setup pCP, but do not expand the file system to
> fill the whole card. Once it is setup, pull the card and create a 3rd
> partition on the card to use the rest of the space, and then add your
> music.
>
> Then restart your pi, and setup the mounting of the
paul- wrote:
> There is nothing in common between Raspbian and piCore, except they are
> Linux based.
>
> This is probably the best place to start
>
> http://tinycorelinux.net/book.html
rmac321, also if just interested in the boot process, try looking at the
boot diagnostics.
[Main] page i
wtnh wrote:
> BTW - it appears that when I create a new mount point on the 3rd
> partition (I called it "music") I am unable to write directories or
> files remotely via sftp - I get "permission denied". I recall a similar
> issue with USB drives formatted with FAT which was fixed in 3.2 I
> beli
stereoptic wrote:
> I am running the latest version piCoreplayer on a Raspberry pi 3 with
> jivelite. It is connected to my network through ethernet via a wi-fi
> AC750 bridge. If I play an album proper it will play straight through
> without any issues. If I play a playlist with songs (99% AL
Hi,
I just noticed that there is 3.22 update.
Trying to Update piCorePlayer without removing the SD card but getting
the following error:-
[ INFO ] You are downloading piCorePlayer3.22
[ INFO ] You are currently using piCorePlayer3.20
[ INFO ] Boot partition size required: 25650. Boot partition
Not sure if this is the pointer you wanted but
24161
Pcp Needs to be in at least "Advanced" mode
+---+
|Filename: 2017-12-07 22_23_24-pCP - Main Page.jpg |
|Download: http://forums.slimdevices.com/attachme
Greg Erskine wrote:
> rmac321, also if just interested in the boot process, try looking at the
> boot diagnostics.
> [Main] page in [Beta] mode > [Diagnostics] > [Boot]
Eureka!
Paul, The tiny core book is fascinating - which means you are now
responsible for me finding something new to steal tim
Jeff07971 wrote:
> Not sure if this is the pointer you wanted but
>
> 24161
>
> Pcp Needs to be in at least "Advanced" mode
Thanks Jeff,
I did look there,no option to resize boot partition size though :(
Note though that current file system size is practically entire sd
card,I get the
Greg Erskine wrote:
> hi stereoptic,
>
> I don't really have an answer, but I was wondering if it was an issue
> when the file is getting converted differently for the devices.
>
> Maybe ALAC is getting converted to FLAC on LMS for the Touch but not for
> pCP (squeezelite).
>
> regards
> Greg
Greg Erskine wrote:
> Hi wtnh,
>
> I don't know the windows way.
>
> Adding a new partition is a similar process to enlarging the second
> partition, just don't delete the second partition and use the
> appropriate sector values.
>
> Gerrelt describes it here and there is also a README on the
bolony wrote:
> Hi,
> I just noticed that there is 3.22 update.
>
> Trying to Update piCorePlayer without removing the SD card but getting
> the following error:-
>
> [ INFO ] You are downloading piCorePlayer3.22
> [ INFO ] You are currently using piCorePlayer3.20
> [ INFO ] Boot partition size
I've got a curious issue when using this through HDMI on my av amp
(Marantz SR7009). It will work perfectly fine but when I switch to
another device the ARC functionality appears broken, I don't know much
about HDMI but it seems like pcp is 'taking control' of the amp and
stopping the ARC function
Greg Erskine wrote:
> hi stereoptic,
>
> I don't really have an answer, but I was wondering if it was an issue
> when the file is getting converted differently for the devices.
>
> Maybe ALAC is getting converted to FLAC on LMS for the Touch but not for
> pCP (squeezelite).
>
> regards
> Greg
Greg Erskine wrote:
> hi bolony,
>
> Have a look at the 23 Sept 2017 - piCorePlayer 3.22 Notes, it explains
> what's happening:
>
> https://sites.google.com/site/picoreplayer/home/news
>
> regards
> Greg
Thats Greg,well that explained it!
Ive now spent the morning trying to get 3.22 up and ru
What is your mount and samba configuration.
paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858
View this thread: http://forums.slimdevices.com/showthread.php?t=107352
___
paul- wrote:
> What is your mount and samba configuration.
Thanks Paul,I removed and reinstalled samba and all working fine now :)
bolony's Profile: http://forums.slimdevices.com/member.php?userid=66139
View this thread:
Thought I would share this in case anyone else wants to build one of
these.
Hardware:
pi Zero W + 40-pin header + a good sized SD card - e.g. 128 GB for lots
of music storage - of course you could use a regular pi for this as
well
Allo Mini Boss DAC (for those not familiar - this is the only mast
Suggestion
The Clear Cache button on the LMS page could do with a conformation
dialogue along with some more text to explain the consequences.
I clicked it by mistake when trying to do LMS restart and therefore lost
all of my settings, favourites, configured plugins etc
Sent from my iPhone usi
Sorry about that Paul. Ive wondered if that option should have been
included. Ive used it during developing, but most users should have
no need for that.I thought it had a pop up confirmation, Ill check
it
paul-'s
wtnh wrote:
> I can verify that Minitool Partition Wizard on Windows 10 will do the
> job of creating the third partition - ext4 in my case; I was sidetracked
> by bad hardware on one computer.
>
> I was able to temporarily get around the permission issue by PuTTY'ing
> into piCorePlayer (which
paul- wrote:
> Confirmed: Added a confirmation popup for the next release.
Great. Thanks paul-
Paul Webster
http://dabdig.blogspot.com
Paul Webster's Profile: http://forums.slimdevices.com/member.php?userid=105
View thi
wtnh wrote:
> Just to circle back on this - doing a "sudo chmod o+w /mnt/music"
> permission change persists across reboots. Yay! ("music" is the mount
> point I created for my LMS music library).
>
> So anytime I want to copy more music over to pCP and LMS, I just use
> FileZilla to queue up tr
Hello
First sorry for my English -)
I need your help, please.
I have a problem with the LMS when I restart my raspberry where I
installed the picoreplayer 3.21 or 3.22
1/ I install the PiCorePlayer on the raspberry and I choose the audio
output. I restart and the Squeezelite is running
2/ Th
Greg Erskine wrote:
> hi palmerx,
>
> The backup command is "sudo filetool.sh -b" not "sudo filetool.sh-b".
>
> It's may be easier to use $pcp bu. Type $pcp for a list of common
> commands.
>
> When using winSCP you are usually logged in as "tc", so you will get
> file permissions issues on ce
Greg Erskine wrote:
> Hi wtnh,
>
> Thanks for spending your time doing the write up and confirmation posts.
> :D
>
> Just a note: I use winSCP sync function to sync my library from my
> Windows 10 ripping PC to my LMS (RPi with USB drive) and also backup pCP
> (with USB drive). I haven't used F
palmerx wrote:
> Hi Greg
>
> I did with "sudo filetool.sh -b" and also with "pcp bu" but had no
> sucsess, always after reoot this stupid 1 is missing in the asound.conf.
>
> Will this initalisations isue be solved by the next release? If yes I'll
> bether wait for that becuase it looks like I
christofer_44 wrote:
>
>
> 3/ Then I enable the LMS AUTOSTART (OK) and I start the LMS and the LMS
> is running (OK)
>
> 4) After when I shutdown the Raspberry the picoplayer restart but the
> LMS doesn' t work and when I start the LMS,
> it doesn't work
>
Christofer,
When you install LMS t
stereoptic wrote:
> I am running the latest version piCoreplayer on a Raspberry pi 3 with
> jivelite. It is connected to my network through ethernet via a wi-fi
> AC750 bridge. If I play an album proper it will play straight through
> without any issues. If I play a playlist with songs (99% AL
ralphy wrote:
> You don't provide a log from squeezelite but it's likely that you need
> to move the metadata atoms to the beginning of the alac file.
>
> See 'page 35'
> (http://forums.slimdevices.com/showthread.php?107352-Announce-piCorePlayer-3-20/page35)
> of this thread starting at post 344
Hi,
First of all, thanks a lot for the great job. I use piCorePlayer with a
Pi3 and an HiFiBerry Digi+ Pro and everything works fine.
Now I want to use the USB DAC, it works well except that I hear loud
clicks/pops between tracks only when the sample rate changes : for
example from 44.1 to 192 o
fpz wrote:
> Hi,
>
> First of all, thanks a lot for the great job. I use piCorePlayer with a
> Pi3 and an HiFiBerry Digi+ Pro and everything works fine.
>
> Now I want to use the USB DAC, it works well except that I hear loud
> clicks/pops between tracks only when the sample rate changes : for
paul- wrote:
> This is a DAC problem, we cannot deal with that in pCP or squeezelite.
> Some i2s Dac do the same thing you mention, others have internal muting
> functions that handle that.
>
> Your best bet is to resample everything to the same rate.
OK. Thanks for the information and your ad
stereoptic wrote:
> Thanks for that. I will look into it. I think that my issue is
> slightly different though. The files play fine when I play the album
> proper, but when they are mixed in a playlist the playlist will stop
> playing at that point. If I advance manually to the next track, th
ralphy wrote:
> You'll need to enable it on the Squeezelite Settings tab.
>
> Choose all=debug
>
> Log file is located at /var/log/pcp_squeezelite.log
Thanks for that! I really appreciate the followup!
However, I may wind up reformatting my SD card and re-installing
piCorePlayer.
This one is ac
ralphy wrote:
> You don't provide a log from squeezelite but it's likely that you need
> to move the metadata atoms to the beginning of the alac file.
>
> See 'page 35'
> (http://forums.slimdevices.com/showthread.php?107352-Announce-piCorePlayer-3-20/page35)
> of this thread starting at post 344
...hmm version 3.02 with Ralphy's basic Squeezelite and the issue has
gone away. Can't seem to upload jivelite tonight though -
> [ INFO ] Downloading Jivelite from Ralphy's repository...
>
> [ INFO ] Download will take a few minutes. Please wait...
>
> [ ERROR ] not available in repository, t
stereoptic wrote:
> ...hmm version 3.02 with Ralphy's basic Squeezelite and the issue has
> gone away. Can't seem to upload jivelite tonight though -
The basic version does not include wma and alac decoders so LMS is
transcoding them to flac.
My sourceforge website that hosts jivelite, shairpo
ralphy wrote:
> The basic version does not include wma and alac decoders so LMS is
> transcoding them to flac.
>
> My sourceforge website that hosts jivelite, shairport, squeezelite
> updates and lirc for the older picoreplayer versions is still broken,
> even though SF closed my issues as resol
stereoptic wrote:
> OK thanks. By older do you mean <3.1 ?
Actually < 3.20
Ralphy
*1*-Touch, *5*-Classics, *3*-Booms, *1*-UE Radio
'Squeezebox client builds'
(https://sourceforge.net/projects/lmsclients/files/) 'donations'
(https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=LL5P6
Just in case you haven't loaded this on the [Main] page.
Code:
Install FFMpeg libraries for Squeezelite less>
This will download and install FFMpeg Libraries from the pCP repository.
Note:
Internet access is required.
The 7MB FFMpeg library adds playback of AL
ralphy wrote:
> Actually < 3.20
Greg Erskine wrote:
> Just in case you haven't loaded this on the [Main] page.
>
> >
Code:
> > Install FFMpeg libraries for Squeezelite less>
> This will download and install FFMpeg Libraries from the pCP repository.
> Note:
>
stereoptic wrote:
> I am not sure if I installed the FFMpeg libraries. Where do I look to
> verify?
The install button changes to "Remove" if you have it installed
paul-'s Profile: http://forums.slimdevices.com/member.
Hi stereoptic.
If the forth row on [Main] page says "[Install] Install FFMpeg libraries
for Squeezelite" then it has NOT been installed.
If it says "[Remove] Remove FFMpeg libraries for Squeezelite" then the
libraries have been installed.
regards
Greg
-
Thanks for the reply. I have not loaded the FFMpeg library and all is
good. I'll experiment with it and see if it has any effect. I can
always remove it.
stereoptic's Profile: http://forums.slimdevices.com/member.php?use
Hi all,
Is there any way I can get Pcp to send and email from a script ?
I believe that there are some utilities in Tinycore but cannot find the
extensions (Mail-utils) in Pcp
Anyone got any ideas ?
Jeff
*Players:* SliMP3,Squeezebox3 x3,Receiver,SqueezeLiteX,PiCorePlayer
x3,Wandboard
*Serve
I found this perl script http://www.logix.cz/michal/devel/smtp-cli/
which seem to be able to do exactly what I what but it requires Module
MIME::Lite which does not seem to be available.
Anyone know how to compile this module (I've tried) or if it is
available somewhere ?
Or any other ideas ?
J
You can install Perl modules from Cpan, but all of the compile utilities
add a lot to the system. Ill see if I can build it for you and pack
into a extension.
paul-'s Profile: http://forums.slimdevices.com/member.php?use
I found this perl script http://www.logix.cz/michal/devel/smtp-cli/
which seem to be able to do exactly what I what but it requires Module
MIME::Lite which does not seem to be available.
Anyone know how to compile this module (I've tried) or if it is
available somewhere ?
MIME::Lite IMHO is a p
Hi Paul-, Michael
Thanks very much for that
Paul- if you could package the the module as an extension that would be
great, I have looked into Michael's suggestion but am a bit out of my
depth on this one.
Can't even find the modules directory ! :(
Will keep trying !
Jeff
*Players:* SliMP3,
Hi Paul- , Michael
Thanks for your suggestions I did a little more research and found
another way http://caspian.dotconf.net/menu/Software/SendEmail/
It seems to work well without any extra prerequisites.
Thanks again
Jeff
*Players:* SliMP3,Squeezebox3 x3,Receiver,SqueezeLiteX,PiCorePlayer
Good, Adding perl modules lead to alot of extra dependencies.
paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858
View this thread: http://forums.slimdevices.com/showthread.php?t=107352
Can't even find the modules directory ! :(
You should be able to just drop it in to the folder where you store your
own script.
--
Michael
___
unix mailing list
unix@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/unix
Has the link to download squeezelite changed? How do I fix the link
address in the update script?
mcduman's Profile: http://forums.slimdevices.com/member.php?userid=66702
View this thread: http://forums.slimdevices.com/show
I wanted to clone a pCP SD card - both were 16GB and the original had
the FS expanded to full size.
The cloning did not complete because the target 16GB SD card was
slightly smaller than the source.
It probably would have worked fine ... but how about this as an idea
...
In the Resize FS part of p
mcduman wrote:
> Cannot update to squeezelite 1.8.7-1052
> Has the link to download squeezelite changed? How do I fix the link
> address in the update script?
This build has not been released for picoreplayer 3.2.
If you're using an older version, please consider upgrading. The
sourceforge si
Another (old) perl command line email client:
http://caspian.dotconf.net/menu/Software/SendEmail/
(I use this, but didn't try it in pCP)
Tony
SBTouch ♪ SBRadio ♬
Tony T's Profile: http://forums.slimdevices.com/member.ph
Hello, first of all, I have to thank you for this outstanding project.
I have now 2 piCorePlayers at home, both using raspberry pi zero and I2S
DAC, everything runs great.
I have until now 2 things that I haven't found anything about:
1. the Power GPIO works with player status. when music is play
paul- wrote:
> piCorePlayer is a stripped down OS, we don't run avahi or mdnsd
> advertising .local addressing.
Replying to old comment here because I wanted the .local name to appear
as well ... and while avahi is not included in the base pCP, it can be
installed.
I just did it and it seems to
Hi Paul,
Thanks for the feedback.
If you select "avahi.tcz" then press the [Info] button on the
[Extensions] page, scroll down and you will see all the dependencies
(about 15 :eek:).
regards
Greg
Greg Erskine's Profile:
True - but I think only about 5 installed during the process. I presume
the rest were already there.
I'm not suggesting including it as default but easy enough to do for
those that want it.
Paul Webster
http://dabdig.blogspot.com
-
Hi
Would installing avahi allow me to connect to the pCP web interface
using it's host name instead of it's IP address? I've done some Googling
but it's still not clear to me!
Currently I need to access the web interface using an address like this:
http://192.168.0.16/cgi-bin/main.cgi where i'd
Stoker wrote:
> Hi
>
> Would installing avahi allow me to connect to the pCP web interface
> using it's host name instead of it's IP address?
Yes - it would be the hostname you gave it with ".local" at the end.
If it does not work then you might need a avahi server in your network
which you can
How can I run this on piCore? Its important you guess.
https://www.audiophonics.fr/en/diy-dac/audiophonics-i-sabre-dac-es9028q2m-raspberry-pi-3-2-a-b-spdif-i2s-p-12105.html
Setting as a general dac might hinder its capacity but you guys know
best
---
Mair wrote:
> How can I run this on piCore? Its important you guess.
>
> https://www.audiophonics.fr/en/diy-dac/audiophonics-i-sabre-dac-es9028q2m-raspberry-pi-3-2-a-b-spdif-i2s-p-12105.html
>
> Setting as a general dac might hinder its capacity but you guys know
> best
The page that you linke
Paul Webster wrote:
> Replying to old comment here because I wanted the .local name to appear
> as well ... and while avahi is not included in the base pCP, it can be
> installed.
> I just did it and it seems to work.
> pCP web interface/ Advanced/Extensions/
> then go through the available exten
Paul Webster wrote:
> The page that you linked to has a link to a forum post (in French) for
> how to use this in pCP.
> http://forum.audiophonics.fr/viewtopic.php?f=4&t=1952&p=7956#p7956
Thanks. But it says how to use dsd64 in pCp.
Thus I asked a question there.
-
I'm looking for a solution where I can add a button that does the "same
job" as the on/off button in the LMS web GUI ( the one in the right
upper corner).
I tried to look around and I can see the following on the main page in
the picoreplayer GUI and "shutdown"
"This option is not really required
micknew wrote:
> I'm looking for a solution where I can add a button that does the "same
> job" as the on/off button in the LMS web GUI ( the one in the right
> upper corner).
> I tried to look around and I can see the following on the main page in
> the picoreplayer GUI and "shutdown"
> "This op
Jeff07971 wrote:
> Are you using the RPI touchscreen ?
The rpi has gpio. Wire up a button and send a command to the LMS
servers cli interface. You can use the command pcp that we supply to do
some of those commands. Or look at a program like squeezy
micknew wrote:
> I'm looking for a solution where I can add a button that does the "same
> job" as the on/off button in the LMS web GUI ( the one in the right
> upper corner).
> I tried to look around and I can see the following on the main page in
> the picoreplayer GUI and "shutdown"
> "This op
paul- wrote:
> The rpi has gpio. Wire up a button and send a command to the LMS
> servers cli interface. You can use the command pcp that we supply to do
> some of those commands. Or look at a program like squeezy
Thanks for the reply.
But I'm sad to say that I'm on thin ice when you say thi
I have connected a USB amplifier (Behringer UFO202) that can take as
input the low power signals from a turntable (RIAA Phono).
I use the WaveInput plugin so that the turntable can be used as a source
to LMS - and it works well ... except for one thing.
The default input volume is low. I can compe
I am using PCP with the Allo DigiOne board. It works fine after a
reboot, but eventually I will start a track but get no output. The
player says that its playing (time is advancing). Restarting squeezelite
has no effect on the problem. A reboot always clears the problem. I
tried tweaking vario
Drivers are kernel specific, but kernel 4.9.50 contains the latest
driver. Ive tested the Digione without issue.
Is there anything in dmesg, after the card quits playing? What is the
audio source and parameters being used.
paul- wrote:
> Drivers are kernel specific, but kernel 4.9.50 contains the latest
> driver. Ive tested the Digione without issue.
>
> Is there anything in dmesg, after the card quits playing? What is the
> audio source and parameters being used.
You might not notice the problem with casual
paul- wrote:
> Drivers are kernel specific, but kernel 4.9.50 contains the latest
> driver. I’ve tested the Digione without issue.
The 4.9.56 kernel bring some bugfix to the Allo Piano as well.
diamonddust's Profile: htt
Yes, but that card is not his problem. We will not be releasing
another 4.9.y kernel. The next version will use 4.14.y
paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858
View this thread: http://forum
Minor one, but fyi
I have a 2tb USb drive attached to my rpi3 and use this for my music
library. I've set the drive to spin down if it's not in use. Playing
music from the drive is fine - it spins up no problem. The one quirk is
that if the drive is spn down when I reboot the rip for some
There is no timeout setting for the mount command. What is the error
message that you get when mounting (should be in the boot log)
Also, when is the drive detected? Look in dmesg.
paul-'s Profile: http://forums.slimdev
Thanks for the dmesg tip - should have looked there myself, but Linux
isn't my domain ... There were loads of "found new device" messages -
repeating every few seconds. So, addition of dwc_otg.speed=1 tweak and
all seems to have settled down now and mount on reboot's working now.
-
more rpi USB woes. great to hear that its working.
paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858
View this thread: http://forums.slimdevices.com/showthread.php?t=107352
___
I have a Raspberry pi 3 (on ethernet) connected via HDMI to a Marantz
receiver in my guest bedroom that I don't use all too often. It is
running piCoreplayer ver 3.22. with full update and ffmpg library
installed. Most of the time it plays flawlessly, but I am getting some
static and raspy disto
Which power supply do you use? I had very strange crackeling/distorsion
issues when using a step-down-converter (24 -> 5 Volts) as well as an
1,5 A USB adaptor. When I changed to a 2,5 A model, all sound issues
were gone.
Best regards
Martin
PCP (always latest version) on RasPi 3 with PhatDac (
streampunk wrote:
> Which power supply do you use? I had very strange crackling/distortion
> issues when using a step-down-converter (24 -> 5 Volts) as well as an
> 1,5 A USB adaptor. When I changed to a 2,5 A model, all sound issues
> were gone.
> Best regards
> Martin
I've tried the 2.0amp ver
I use similar ones. The ones you mention shouldn't cause the problems I
had.
PCP (always latest version) on RasPi 3 with PhatDac (player & server)
PCP on several RasPis 2 +3
2 Airplay speakers (Sony SA-NS510) integrated via Airplay Bridge Plugin
-
streampunk wrote:
> I use similar ones. The ones you mention shouldn't cause the problems I
> had.
thanks
stereoptic's Profile: http://forums.slimdevices.com/member.php?userid=53162
View this thread: http://forums.slimdevi
If one were to do the in-situ update of pCP, and LMS cache is saved on
the boot disk, would LMS info be wiped clean, effectively starting LMS
over from scratch?
maddymarc's Profile: http://forums.slimdevices.com/member.php?
The update process should not affect LMS.
paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858
View this thread: http://forums.slimdevices.com/showthread.php?t=107352
_
Thanks, Paul!
maddymarc's Profile: http://forums.slimdevices.com/member.php?userid=8233
View this thread: http://forums.slimdevices.com/showthread.php?t=107352
___
unix mailing l
I´ve just found out that I posted this in the wrong thread. I hope I am
right to repost it here. I´m not very familiar with posting in forums.
Normally I just need to read the forum to find a solution.
Hi. First of all: Thank you for your work . I use picoreplayer
everyday for some years now.
I
801 - 900 of 1078 matches
Mail list logo
