Re: [D] KVMHAMonitor getting initialized without host ha enabled [cloudstack]

GitHub user sbrueseke added a comment to the discussion: KVMHAMonitor getting initialized without host ha enabled @weizhouapache I would suggest to take another look into that and change it default. In my opinion a host should not automatically reboot at all if no settings are configured.

Re: [D] KVMHAMonitor getting initialized without host ha enabled [cloudstack]

GitHub user andrijapanicsb added a comment to the discussion: KVMHAMonitor getting initialized without host ha enabled afaik, this has 0 things to do with host HA, VM HA or anything else. This scrip (kvmspheartbeat.sh) has been there for last 12 years (that I'm aware of) - and it only checks

Re: [D] KVMHAMonitor getting initialized without host ha enabled [cloudstack]

GitHub user weizhouapache added a comment to the discussion: KVMHAMonitor getting initialized without host ha enabled > > > @DaanHoogland now I am confused! Why is KVMHAMonitor rebooting hosts when > > > the host is unable to write a heartbeat file to any storage when any HA > > > setting is

Re: [D] KVMHAMonitor getting initialized without host ha enabled [cloudstack]

GitHub user dseralathan added a comment to the discussion: KVMHAMonitor getting initialized without host ha enabled heartbeat[13962]: kvmheartbeat.sh will reboot system because it was unable to write the heartbeat to the storage. I received the same error when my Primary NFS Storage was in

Re: [D] KVMHAMonitor getting initialized without host ha enabled [cloudstack]

GitHub user sbrueseke added a comment to the discussion: KVMHAMonitor getting initialized without host ha enabled > > @DaanHoogland now I am confused! Why is KVMHAMonitor rebooting hosts when > > the host is unable to write a heartbeat file to any storage when any HA > > setting is disabled

Re: [D] KVMHAMonitor getting initialized without host ha enabled [cloudstack]

GitHub user sbrueseke added a comment to the discussion: KVMHAMonitor getting initialized without host ha enabled @DaanHoogland now I am confused! Why is KVMHAMonitor rebooting hosts when the host is unable to write a heartbeat file to any storage when any HA setting is disabled in the UI?

Re: [D] KVMHAMonitor getting initialized without host ha enabled [cloudstack]

GitHub user sbrueseke added a comment to the discussion: KVMHAMonitor getting initialized without host ha enabled > @sbrueseke are you addressing (designing/implementing a solution to) this bug? I'm not deep enough into the topic to suggest a solution. We noticed the bug because we were

Re: [D] KVMHAMonitor getting initialized without host ha enabled [cloudstack]

GitHub user DaanHoogland added a comment to the discussion: KVMHAMonitor getting initialized without host ha enabled Hey @sbrueseke , I finally got a chance to look at this again.If you are using NFS this is how it is supposed to work , I think. If you are using LinStor, see the merged PR

Re: [D] KVMHAMonitor getting initialized without host ha enabled [cloudstack]

GitHub user DaanHoogland added a comment to the discussion: KVMHAMonitor getting initialized without host ha enabled @sbrueseke are you addressing (designing/implementing a solution to) this bug? GitHub link: https://github.com/apache/cloudstack/discussions/8953#discussioncomment-9174417

Re: RVR's in master/master state

thanks Gary, good te hear On Fri, Apr 19, 2024 at 6:20 PM Gary Dixon wrote: > Hi Daan > > Sorry - I forgot to post back what the issue turned out to be. > > We had a power outage in our building where our Dev environment is racked. > After doing some tcp dumps on some vxlan interfaces I was

Monitoring Cloudstack

Hello all. What ways do you guys monitor your Cloudstack servers? SNMP, API, etc?..

Re: CloudStack managing KVM Hypervisors on multiple architectures?

Hi Rishi, There may be approaches you can consider; 1. Arch-specific cluster: CloudStack assumes clusters are homogenous; so you can start with arch-specific cluster - one cluster of x86 hosts and another one of arm64, within the same zone. You'll then need to decide which arch you want to

Re: Community Over Code North America 2024 - Talk submitting

Hello guys, I discussed with the responsibles and it was decided that the CloudStack talks will not be targeted to an individual track; however, the track "Cloud and runtime" was renamed to "CloudStack, Cloud, and Runtime", due to our expressiveness in it, and we will be co-chairing this

Re: Deployment of VNF appliance without VR

Hmm Interesting. Thanks Alex. Will try it out. Regards, Shiv (Sent from mobile device. Please excuse brevity and typos.) On Fri, 19 Apr 2024, 21:10 Alex Mattioli, wrote: > You can set your upstream router with a static ARP entry for the public > IP, this way if your user changes the IP they'll

RE: RVR's in master/master state

Hi Daan Sorry - I forgot to post back what the issue turned out to be. We had a power outage in our building where our Dev environment is racked. After doing some tcp dumps on some vxlan interfaces I was seeing lots of bad checksums. Our Network engineer swore that the switches we're all OK

Re: [D] logging standards in CloudStack [cloudstack]

GitHub user GutoVeronezi added a comment to the discussion: logging standards in CloudStack I believe that adding an error message in `ERROR` followed by the stack trace in `DEBUG` is not so interesting. For instance, if we have the `INFO` level enabled and an exception occurs, we would not

Re: CloudStack managing KVM Hypervisors on multiple architectures?

different clusters should be fine. maybe @Rohit Yadav can give some advice. -Wei On Fri, Apr 19, 2024 at 4:56 PM Daan Hoogland wrote: > > good point Rishi, > I think you would have to separate the hardware into different > clusters at least, but maybe even separate zones. I never heard of >

RE: Deployment of VNF appliance without VR

You can set your upstream router with a static ARP entry for the public IP, this way if your user changes the IP they'll simply lose their own connectivity. Should be quite easy to automate. -Original Message- From: K B Shiv Kumar Sent: Friday, April 19, 2024 4:30 PM To:

Re: Backup options

looks like you've been quite complete in your sumup Jimmy On Fri, Apr 12, 2024 at 3:41 AM Jimmy Huybrechts wrote: > > Hi, > > What are the current backup options that work with Cloudstack? > > - Veeam enterprise > - Networker > - Backroll > > The above I found, backroll seems to not be very

Re: ManageIQ + CloudStack

Piotr, sounds good. Are you willing to propose and mentor this effort? On Thu, Apr 11, 2024 at 11:26 AM Piotr Pisz wrote: > > Hi, > > > > I have an idea that could be implemented as part of GSOC 2024. > > > > We currently use vSphere+Automation Center for internal purposes, but we > plan to

Re: CloudStack managing KVM Hypervisors on multiple architectures?

good point Rishi, I think you would have to separate the hardware into different clusters at least, but maybe even separate zones. I never heard of anybody doing a setup like yours. On Wed, Apr 10, 2024 at 6:56 PM Rishi Misra wrote: > > Can a CloudStack instance running on x86 manage deployments

Re: Deployment of VNF appliance without VR

Hi Wei, The main concern with that solution is how do we prevent the user from going into the VNF and changing the public IP. That can cause an ARP clash and bring down someone else's system too. That's the only and very major drawback in that solution. Was wondering if there's any workaround for

Re: RVR's in master/master state

sorry no one could help you Gary, Have you gotten any further on this issue? On Fri, Apr 5, 2024 at 4:59 PM Gary Dixon wrote: > HI all > > > > ACS 4.15.2 > > Ubuntu 20.04 > > KVM > > Adv Zone no sec groups > > > > We recently had to move all of our dev ACS environment virtual management > and

Re: Deployment of VNF appliance without VR

Hi, You can deploy the VNF appliance on a shared network as the first network -Wei On Fri, Apr 19, 2024 at 3:38 PM Kaushik Bora wrote: > > Dear Community, > > > >We have been going through the VNF appliance deployment which is > available in release 4.19.0. We have successfully tested the

Deployment of VNF appliance without VR

Dear Community, We have been going through the VNF appliance deployment which is available in release 4.19.0. We have successfully tested the VNF deployment scenario with the Virtual Router. However, want to evaluate if the VNF appliance can be deployed without the Virtual Router as well,

[ANNOUNCEMENT] Apache CloudStack LTS Maintenance Release 4.18.2.0

The Apache CloudStack project is pleased to announce the release of CloudStack 4.18.2.0. The CloudStack 4.18.2.0 release is a maintenance release as part of its 4.18.x LTS branch and contains around 100 fixes and improvements since the CloudStack 4.18.1.0 release. Some of the highlights include:

Re: KVM instances get random data disk ids during creation

Hi everyone, To anyone that may face this issue, the problem is in terraform parallelism when executing *for_each*. As long as entities are listed manually the devices are attached as expected. Best regards, Jordan On Wed, Apr 17, 2024 at 2:22 PM jordan j wrote: > Hi everyone, > > We are

AW: AW: Storage solution for Cloudstack

We do not use any raid in front of the NVMe drives, because of possible performance bottlenecks. We are using LVMThin on top of the drives. -Ursprüngliche Nachricht- Von: David Sekne Gesendet: Freitag, 19. April 2024 11:04 An: users@cloudstack.apache.org Betreff: Re: AW: Storage

Re: AW: Storage solution for Cloudstack

Hi Swen, Since you need a pool to present to linstor on each node do you use any RAID (SW or HW) for the NVMe's (or you use ZFS / VG's)? Regards, David On 19. 04. 24 08:49, m...@swen.io wrote: Hi David, 1. Are you running linstor just as HCI or you also have a dis-aggregated cluster

Re: [DISCUSS] Define a release schedule for the project

nice to see this discussion being had again and sorry to be late in replying João, I see no replies have come forward yet. Let's add a new https://github.com/apache/cloudstack/discussions/new/choose for this as well. I still feel my proposal is good and should have been applied. but we can gather

AW: Storage solution for Cloudstack

Hi David, 1. Are you running linstor just as HCI or you also have a dis-aggregated cluster somewhere (and some recomendations regarding it)? > we run only HCI clusters, so I cannot tell you a lot about standalone > clusters. 2. Whats the resource usage of linstor (even better if you have data

Re: Storage solution for Cloudstack

Hello Swen, Bryan, We are just evaluating linstor at the moment as well (looks very promising). I would like to run a standalone cluster (not HCI) just for linbit (so we would use only diskless + nfs for secondary storage). I would have a couple of questions for both: 1. Are you running

Re: Migration status of instance

Hi, You can check the migration progress via "virsh domjobinfo" command on the source host of the vm. for example, the output of vm migration to another storage $ date;virsh domjobinfo i-2-1338-VM Thu Apr 18 19:19:06 UTC 2024 Job type: Unbounded Operation:Outgoing migration

Re: CentOS 7 ? kernel 3.10.0-1160.. really?

ok, that's good to know you can try advanced zones with vxlan. -Wei On Thu, Apr 18, 2024 at 5:22 PM Embedded wrote: > > > > > On Thursday 18 April 2024 09:28:42 PM (+07:00), Wei ZHOU wrote: > > > You can configure vxlan device in the kvm hosts, and test the connectivity. > > I doubt if your

Re: CentOS 7 ? kernel 3.10.0-1160.. really?

On Thursday 18 April 2024 09:28:42 PM (+07:00), Wei ZHOU wrote: > You can configure vxlan device in the kvm hosts, and test the connectivity. > I doubt if your switch ports have been configured to support vxlan. > vxlan worked fine across multiple xcp-ng hosts on same network previously.

Re: cloudstack-agent mismatch size

it works now, thanks so much :) On Thu, Apr 18, 2024 at 1:52 PM Rohit Yadav wrote: > Hi Francisco, all, > > We've in process of publishing the new 4.18.2.0 release, due to which the > repo metadata has been changed. > > The download.cloudstack.org repo is served by CDN77 (I've purged the >

Re: CentOS 7 ? kernel 3.10.0-1160.. really?

You can configure vxlan device in the kvm hosts, and test the connectivity. I doubt if your switch ports have been configured to support vxlan. -Wei On Thursday, April 18, 2024, Embedded wrote: > > > > On Thursday 18 April 2024 08:18:18 PM (+07:00), Wei ZHOU wrote: > > > > as my servers with

Re: CentOS 7 ? kernel 3.10.0-1160.. really?

On Thursday 18 April 2024 08:18:18 PM (+07:00), Wei ZHOU wrote: > > as my servers with kvm do have 2 nics, the managment server only has one. > > It is fine. > > > second to that i dont control the network infrastructure, its in a colo, > > therefore no vlans. > > That's the main problem.

Re: CentOS 7 ? kernel 3.10.0-1160.. really?

> as my servers with kvm do have 2 nics, the managment server only has one. It is fine. > second to that i dont control the network infrastructure, its in a colo, > therefore no vlans. That's the main problem. if you cannot use vlan, you cannot use the isolated networks. shared network is the

Re: CentOS 7 ? kernel 3.10.0-1160.. really?

On Thursday 18 April 2024 07:43:26 PM (+07:00), Wei ZHOU wrote: > Hi, > > I have seen your question regarding networking in another thread. > Based on your infrastructure (servers with only 1 nics and vlan is not > supported), the only option is Basic zone. > To use Advanced zone (or with

Re: CentOS 7 ? kernel 3.10.0-1160.. really?

Hi, I have seen your question regarding networking in another thread. Based on your infrastructure (servers with only 1 nics and vlan is not supported), the only option is Basic zone. To use Advanced zone (or with security groups), servers should have at least two nics and vlan should be

Re: CentOS 7 ? kernel 3.10.0-1160.. really?

On Thursday 18 April 2024 07:03:06 PM (+07:00), Wei ZHOU wrote: > sorry, the compatibility matrix of latest 4.19.0.1 > https://docs.cloudstack.apache.org/en/4.19.0.1/releasenotes/compat.html > Thanks, Ive become a pro at installing cs on Debian and Ubuntu, did it like 30 times over the

Re: CentOS 7 ? kernel 3.10.0-1160.. really?

sorry, the compatibility matrix of latest 4.19.0.1 https://docs.cloudstack.apache.org/en/4.19.0.1/releasenotes/compat.html -Wei On Thu, Apr 18, 2024 at 2:02 PM Wei ZHOU wrote: > > Please check the compatibility issue > https://docs.cloudstack.apache.org/en/4.19.0.0/releasenotes/compat.html > >

Re: CentOS 7 ? kernel 3.10.0-1160.. really?

Please check the compatibility issue https://docs.cloudstack.apache.org/en/4.19.0.0/releasenotes/compat.html -Wei On Thu, Apr 18, 2024 at 1:58 PM Embedded wrote: > > > wait, what... 4.19 install guide says use CentOS 7... which is like kernel > 3.10.0-1160, 2020-11-12, 2020-09-29... > > >

CentOS 7 ? kernel 3.10.0-1160.. really?

wait, what... 4.19 install guide says use CentOS 7... which is like kernel 3.10.0-1160, 2020-11-12, 2020-09-29... seriously? is there anything newer more modern recommended that is know to work? Rocky/Alma Centos8/9 ? -- Sent with Vivaldi Mail. Download Vivaldi for free at vivaldi.com

Re: cloudstack-agent mismatch size

Hi Francisco, all, We've in process of publishing the new 4.18.2.0 release, due to which the repo metadata has been changed. The download.cloudstack.org repo is served by CDN77 (I've purged the cache and changed caching timeout from 12hrs to 1hr) and can have caching issue around the time an

cloudstack-agent mismatch size

Good morning guys, I'm having this problem: Get:16 https://download.cloudstack.org/ubuntu jammy/4.18 all Packages [5.626 B] Err:16 https://download.cloudstack.org/ubuntu jammy/4.18 all Packages File has unexpected size (6832 != 5626). Mirror sync in progress? [IP: 185.76.11.112 443] Hashes

Monitoring Apache CloudStack

Hi all, We just launched a new White Paper at ShapeBlue, which you might find useful if you need to monitor Apache CloudStack. I thought I would share it here: The White Paper focuses on the utilization of Prometheus & Zabbix to get real-time insights into system performance, ensuring

public servers / networking question / topology

Ok, real quick, 3 servers on public ip space, 46.xxx.xxx.xxx/26 network 46.xxx.xxx.129 gateway server 1 46.xxx.xxx.132 server 2 46.xxx.xxx.133 server 3 46.xxx.xxx.134 how do i configure networking advance zones so 1) all vms are on private 192.xxx.10.xxx network 2) Virtual router is say

Migration status of instance

Hi, I was migration a pretty big VM between hosts (using local storage) and while in the end that works fine. Is there any way to see a kind of status? In the GUI I can see it starts and finishes which is nice but of little use in this case. I tried looking at some logs but now where does it

Re: [VOTE] Apache CloudStack 4.18.2.0 RC2

Hi all, +1 I did some upgrade tests from previous versions (with KVM and VMWare hypervisors) and some basic VM / network operations (start, stop, reinstall, reboot, migrate, resize, recover, restart with cleanup). I haven't found issues. Best wishes, Vladi João Jandre wrote: Hi All, I've

BGP EVPN VXLAN for KVM CloudStack

Hello CloudStack Community, I am attempting to establish full Layer 3 connectivity between the KVM hosts in my CloudStack deployment. I have found a few resources to assist in the process, including the modifyvxlan.sh script necessary to establish the appropriate network bridge configuration

Re: Handling KVM host failure

Thanks Swen! Is this occurring because the agent is only periodically being queried? When I perform no action, it took around 15 minutes to notice a host offline. When I did a force reconnect it detected the host was disconnected, as expected. Waiting 15 minutes just seems a bit excessive to

Re: [VOTE] Apache CloudStack 4.18.2.0 RC2

+1 (binding) I’ve upgraded from 4.18.2 to 4.19.0.1 and it was successful, we’re still waiting Vladi to conclude with some general upgrades from previous versions and let us know, but so far it looks good. Thanks, Bobby. From: Rohit Yadav Date: Wednesday, 17 April 2024 at 14:25 To:

New Case Studies for CloudStack

Hi all, I know we have some new users here on the main list, which are new to CloudStack and started to use the technology recently. As always I would like to continue presenting different success stories online. Will someone be interested to do a case study for your experience with CloudStack?

Re: Enable nested virtualization for instances?

Hey Gabriel, We figured it out but alas Xen core nested did not work well on our CPUs so we had to revert to KVM. Thank you for dropping a line! Regards, Jordan On Tue, Apr 2, 2024 at 9:28 PM Gabriel Santos < gabriel.san...@scclouds.com.br> wrote: > Hi, Jordan! > > I don't know if you've

Re: host tags issue

Hello Gary, In VM details you can find the current host and the compute offering ( in compute offering you have the host_tag ), so if your VM was placed on right host as per host_tag, you can check the host_id in vm_instance table on the database. On Wed, 17 Apr, 2024, 15:42 Gary Dixon,

KVM instances get random data disk ids during creation

Hi everyone, We are using Cloudstack 4.19.0.1 with Debian12 KVM host as hypervisor. When we try to create an instance (Debian12) with Terraform (version of provider module 0.4.0), the additional disks are not being created in the specific order we set: resource "cloudstack_disk" "this" {

Re: Interesting questions

Hi Wingrunt, 1. template can work alright without qemu-guest-agent on it but it is advisable to use it. 2. You need only one system VM template for the hypervisor used. As long as the console, ssvm and routers are started it means the deployment is fine. I notice on my kvm setup I also have 2,

Re: [VOTE] Apache CloudStack 4.18.2.0 RC2

+1 (binding) I've built and uploaded the 4.18.2.0 RC2 packages here for people's convenience - http://cloudstack.apt-get.eu/testing/4.18.2.0-rc2/ * Tested upgrade from 4.18.1.1 to 4.18.2.0 RC packages -ok * Rebuilt systemvms (ssvm and cpvm) - ok * Restart network - ok * New VM

host tags issue

ACS 4.15.2 KVM on Ubuntu 20.04 Adv Zone no secgroups Hi all I am just testing implementing host tags in our dev environment Where in the database can I check the Instance that has been deployed from an Offering that specifies a host tag to see the host tags have applied to the VM I do not see

Re: [VOTE] Apache CloudStack 4.18.2.0 RC2

+1 tested the usual VM, network, and storage operations. -Jithin From: João Jandre Date: Friday, 12 April 2024 at 5:07 PM To: d...@cloudstack.apache.org , users@cloudstack.apache.org Subject: [VOTE] Apache CloudStack 4.18.2.0 RC2 Hi All, I've created a 4.18.2.0 release (RC2), with the

Re: How to kcs cluster name with supplied name?

Hi Jaejong You can login to the control node from the Cloudstack management server http://docs.cloudstack.apache.org/en/4.19.0.0/plugins/cloudstack-kubernetes-service.html#kubernetes-clusters Example ssh -i /var/cloudstack/management/.ssh/id_rsa -p 2223 cloud@

Re: confusing cloudstack networking

you do not need cloudstack virtual router to provide dhcp/dns service, right ? If you use an advanced zone, you can create a shared network without any service, then the VMs will get dhcp from your router, not cloudstack virtual router. -Wei On Wed, Apr 17, 2024 at 9:03 AM Embedded wrote: > >

ssh to vm built from CentOS 5.5(64-bit)

ok, almost there vms running k8s is up, ssh issue now whats the user to ssh to template vm in cloudstack? ssh to vm built from CentOS 5.5(64-bit) no GUI (KVM) is prompting me for a password ? but it has a ssh-key assigned -- Sent with Vivaldi Mail. Download Vivaldi for free at vivaldi.com

Re: confusing cloudstack networking

ok is there any way to tell vms just to get a dhcp ip off the local lan without the router in the mix?? everything in the lab lan is 192.168.10.xxx On Wednesday 17 April 2024 01:40:30 PM (+07:00), Wei ZHOU wrote: > Hi, > > cloud0 is the control network of virtual routers and system vms. >

Re: confusing cloudstack networking

Hi, cloud0 is the control network of virtual routers and system vms. The IP of cloud0 is configured as 169.254.0.1/16 by default. -Wei On Wed, Apr 17, 2024 at 7:41 AM Embedded wrote: > > cloudstack seems to be confusing networking on a lab install ... vms come > up but > the ip they have

confusing cloudstack networking

cloudstack seems to be confusing networking on a lab install ... vms come up but the ip they have appears to be on the other side instead of the router side, i noticed cloud0 is using a 169.xxx IP address, where this is a flat 192.168.10.xxx network root@cs:~# brctl show bridge name

Dynamic routing for routed mode IPv6 and IPv4 Isolated and VPC networks

Hi all, I'd like to brainstorm dynamic routing in ACS (yes, again... for the newcomers to this mailing list - this has been discussed multiple times in the past 10+ years) ACS 4.17 has introduced routed mode for IPv6 in Isolated networks and VPCs, we are currently working on extending that to

Re: How to kcs cluster name with supplied name?

Thank you Kiran Chavala. Now I changed cluster name. For users, I get Hint at kubernetes manual. using kubeadm kubeconfig user command But I can't find kubeadm command from acs control panel or kcs control vm. Where can I use the kubeadm? -Original Message- From: "Kiran Chavala" To:

How to force NFSv4 in ACS

Hi community! I would like to know if there is any way to force the global use of NFS v4 (for primary and second storage) on ACS. On my NFS server, I changed the settings so that it only accepts mounts from clients in version 4 above. The result is that now mount points are not being created by

RE: CloudStask Add Ldap Account Empty List

Hi, Team CloudStack Version: 4.19.0.1 OS Version: Ubuntu 22 Ldap Search can work with stable output for query:

Re: cloudstack on debian 10/11

ok quick update debian 11.9 as managemnt and host both work on 192.168.xxx.xxx address space as aio, cant seem to connect XCP-NG 8.2.0 though have to debug On Monday 15 April 2024 08:55:34 PM (+07:00), Embedded wrote: > > > > On Monday 15 April 2024 06:33:26 PM (+07:00), Wei ZHOU wrote: >

Re: AW: Manual fence KVM Host

Hello, Murilo NFSv3 has this behaviour, and it is a known issue, see this thread for reference[1]. This situation does not occur using version 4 of the protocol, as it changed the way lock works in this version. However, you mentioned you changed the storage to NFSv4, did you change the lock

Re: How to achieve VNF without VR

You may refer to https://www.shapeblue.com/vnf-appliance-integration-deep-dive/ On Monday, April 15, 2024, Gaurav Shrivastava wrote: > Hi Team, > > > Is there any way to achieve VNF without VR. If there are any steps or > documentation that I can follow please let me know. > > I am using

How to achieve VNF without VR

Hi Team, Is there any way to achieve VNF without VR. If there are any steps or documentation that I can follow please let me know. I am using CloudStack 4.19.0.1 Regards Gaurav -- This message is intended only for the use of the individual or entity to which it is addressed and may contain

Re: Null Pointer Exception on Kubernetes Deploy with CloudMonkey

Hi Pearl, In fact it was because the Network was created using the Cloudmonkey without ACL, once associated an ACL to it worked. Thanks for your prompt reply! BR, Ricardo Pertuz On 15 Apr 2024 at 1:16 PM -0500, users@cloudstack.apache.org, wrote: > > Pearl

Re: Null Pointer Exception on Kubernetes Deploy with CloudMonkey

Hi Ricardo, Was the network tier (of the VPC network) created without associating any ACL. Based on the NPE, it seems like it. This issue doesn't crop up when done via the UI, because creation of network tiers mandates associating an ACL. Regards, Pearl

Null Pointer Exception on Kubernetes Deploy with CloudMonkey

Hi Community, When using Cloudmonkey to create a Kubernetes Cluster we are getting a NullPointer Exception Env * ACS: 4.19.0.1 Hyp: KVM SO: Ubuntu 20 Logs * 2024-04-15 12:55:08,360 ERROR [c.c.a.ApiServer] (qtp931675031-20:ctx-b9ffa6f7 ctx-f16eb6b9 ctx-d99f7c6a) (logid:5accec2e)

Re: AW: Manual fence KVM Host

Complementing the case... I did a new test and found that the problem really lies in the lock generated in NFS. When the KVM host has a virtualized instance running (with NFS primary storage) and this host suddenly loses power, the HA scheme only works if before marking the host as degraded I

Re: AW: Manual fence KVM Host

Correct, the user instance and the computing offer have HA enabled. regards, Murilo Moura On Mon, Apr 15, 2024 at 4:00 AM wrote: > HI Murilo, > > just checking, the user instance you are talking about are using a service > offering with HA enabled, correct? > > Regards, > Swen > >

Re: cloudstack on debian 10/11

On Monday 15 April 2024 06:33:26 PM (+07:00), Wei ZHOU wrote: > Is eth0 added to cloudbr0 bridge ? > further to this once you add the same machine as a host from the gui, you end up with this, which is curious to me because its using inet 169.254.0.1/16 scope global cloud0 on cloud0

Re: cloudstack on debian 10/11

ip a 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever

Re: cloudstack on debian 10/11

Is eth0 added to cloudbr0 bridge ? -Wei On Mon, Apr 15, 2024 at 1:14 PM lists wrote: > > > > > I did in fact get a debian 11 install up and running pretty much as a > management server and almost good as a host. Have to figure out why the > cloidbr0 is on a 169.xxx adress and why no centos

Re: cloudstack on debian 10/11

I did in fact get a debian 11 install up and running pretty much as a management server and almost good as a host. Have to figure out why the cloidbr0 is on a 169.xxx adress and why no centos template was downloaded. Systemvms came up without a problem. > > On Apr

Re: cloudstack on debian 10/11

Found some notes on Debian here, there could be others.. https://gist.github.com/rohityadavcloud/fc401a0fe8e8ea16b4b3a4e3d149ce0c On 2024-04-15 09:54, Nux wrote: Not as yet, no formal support for Debian. That said, this could change in the future.. If you're a keen Debianista then it might be

Re: cloudstack on debian 10/11

Not as yet, no formal support for Debian. That said, this could change in the future.. If you're a keen Debianista then it might be worth having a go nevertheless, it might just work or with minimum changes. On 2024-04-13 10:49, Embedded wrote: the install guide states Preferred: CentOS/RHEL

Re: CentOS 5.5(64-bit) no GUI (KVM) Not Ready

You can restart the SSVM or the ‘cloud’ agent in SSVM to trigger downloading. -Jithin From: Embedded Date: Monday, 15 April 2024 at 10:16 AM To: users@cloudstack.apache.org Subject: Re: CentOS 5.5(64-bit) no GUI (KVM) Not Ready On Monday 15 April 2024 11:28:11 AM (+07:00), Jithin Raju

Re: How to kcs cluster name with supplied name?

Hi Jaejong The kuberneres/cks cluster created in Cloudstack are created via Kubeadm tool which always creates with the default name as kubernetes You can rename the cluster as per your requirement by following this article

AW: AW: Manual fence KVM Host

HI Murilo, just checking, the user instance you are talking about are using a service offering with HA enabled, correct? Regards, Swen -Ursprüngliche Nachricht- Von: Murilo Moura Gesendet: Sonntag, 14. April 2024 06:31 An: users@cloudstack.apache.org Betreff: Re: AW: Manual fence KVM

Re: CentOS 5.5(64-bit) no GUI (KVM) Not Ready

On Monday 15 April 2024 11:28:11 AM (+07:00), Jithin Raju wrote: > Hi, > > Can you check the progress it must be still downloading. > nope, dont see where its doing anything, is it possible to trigger somehow manually from cli ??? > -Jithin > > From: Embedded > Date: Monday, 15 April

Re: CentOS 5.5(64-bit) no GUI (KVM) Not Ready

Hi, Can you check the progress it must be still downloading. -Jithin From: Embedded Date: Monday, 15 April 2024 at 9:00 AM To: users@cloudstack.apache.org Subject: CentOS 5.5(64-bit) no GUI (KVM) Not Ready just deployed a fresh cs 4.19 got the host up, system vms are running, but template vm

CentOS 5.5(64-bit) no GUI (KVM) Not Ready

just deployed a fresh cs 4.19 got the host up, system vms are running, but template vm says CentOS 5.5(64-bit) no GUI (KVM) Not Ready ideas? did i miss something? -- Sent with Vivaldi Mail. Download Vivaldi for free at vivaldi.com

How to kcs cluster name with supplied name?

I create kcs community iso 1.28.4 on acs 4.19.0.1. I create two clusters. The cluster name is not populated to Config. In cluster kubeconfig, cluster name is kubernetes and user is kubernetes-admin. So I can not merge two into one. I remember it is possible in previous version. kubeconfig is

Re: AW: Manual fence KVM Host

Hello Guto! I carefully checked the instructions that you and Daniel left in this thread that I opened, but one point is not working and I would like to see if you have experienced something similar... By putting the host in the "Disconnected" state, I can trigger the API to mark the host as

AW: Handling KVM host failure

We are monitoring our hosts via Zabbix and take manual actions when a host fails. If a host is in state "Disconnected" or "Alert" you can declare a host as degraded via api (https://cloudstack.apache.org/api/apidocs-4.19/apis/declareHostAsDegraded.h tml) or UI (icon). Daniel Salvador

cloudstack on debian 10/11

the install guide states Preferred: CentOS/RHEL 7.2+ or Ubuntu 16.04(.2) or higher would this include say debian 10/11 as a manager / and host/kvm hypervisor ??? -- Sent with Vivaldi Mail. Download Vivaldi for free at vivaldi.com

Re: [VOTE] Apache CloudStack 4.18.2.0 RC2

+1 (binding) on basic VM/storage/network lifecycle ops. Thanks Joao On 2024-04-12 19:56, Bryan Lima wrote: +1 I manually tested some basic functionalities with the KVM hypervisor and Ubuntu 20.04 LTS: * VM deploy; * Cold and live migration with and without storage migration, NFS to

Re: [VOTE] Apache CloudStack 4.18.2.0 RC2

+1 I manually tested some basic functionalities with the KVM hypervisor and Ubuntu 20.04 LTS: * VM deploy; * Cold and live migration with and without storage migration, NFS to iSCSI (SharedMountPoint) and vice-versa; * Network management, firewall, egress/ingress rules, and operations

Handling KVM host failure

Hello All, How are folks handling KVM host failure in CloudStack? For example, when a host has a loss of power or hard power off, CloudStack takes nearly 15 minutes to detect that the host is offline. This creates a challenge as VMs are considered to be running in CloudStack during that time

<    4   5   6   7   8   9   10   11   12   13   >