RE: Question about migrating local storage datadisks

migrate to a new host. > > > On Wednesday, July 6, 2016, Somesh Naidu wrote: > >> First off, for datadisks, you may not explicitly need to move them >> around. If you detach it from the existing VM and attach it to another VM >> (essentially the host running that VM)

RE: Question about migrating local storage datadisks

First off, for datadisks, you may not explicitly need to move them around. If you detach it from the existing VM and attach it to another VM (essentially the host running that VM) that does not have access to the storage where the datadisk currently resides, then cloudstack will copy the datadis

RE: [ANNOUNCE] Will Stevens as new Apache CloudStack VP

Congratulations Will! Regards, Somesh -Original Message- From: Tutkowski, Mike [mailto:mike.tutkow...@netapp.com] Sent: Monday, May 23, 2016 2:13 AM To: d...@cloudstack.apache.org Cc: users@cloudstack.apache.org; market...@cloudstack.apache.org Subject: Re: [ANNOUNCE] Will Stevens as new

RE: Calculating vm network usage

VM statistics are different from usage. These are runtime information stored in objects and never persisted. So yes this is the intended behavior. On the other hand, network usage/statistics are processed by ACS usage server and they are persisted in the DB (I forget the table names) so you shou

RE: (Re-)introduction

Good to see you back Kirk! Regards, Somesh -Original Message- From: Kirk Kosinski [mailto:kirk.kosin...@shapeblue.com] Sent: Tuesday, April 05, 2016 10:43 PM To: users@cloudstack.apache.org Subject: (Re-)introduction Importance: Low Hi, Apache CloudStack users. If you don't know me, I

RE: URGENT - CloudStack agent not able to connect to management server

> Eventually, we could only connect back the host after we rebooted it, which > means sacrificing all the VMs which were still up and running during the > disconnection. Instead of rebooting the KVM hosts, you may want try stopping the agent on all the hosts and then starting the agent service

RE: Cannot take snapshot ok KVM in 4.8

Rui, That global config is for volume snapshots not virtual machine snapshots. Verify and update the following in the DB: select vm_snapshot_enabled from hypervisor_capabilities where hypervisor_type='KVM'; Regards, Somesh -Original Message- From: Rui Mao [mailto:maoru...@163.com] Se

RE: Virtual router starting

Mohd, Did you get this fixed? If not, could you share entire logs relevant to this incident via pastebin or similar so we can ascertain the cause. In addition, please specify the version you are using (best is to share output of cloudstack-sccs). Regards, Somesh -Original Message- Fro

RE: Network Rate

One way to accomplish this would be to set rate limit on Network offering (in UI, the label for that parameter is “Network Rate (Mb/s)”) that would be used specifically to create network/s specific to that particular account. Regards, Somesh From: Yesid Mora [mailto:ym...@o4it.com] Sent: Friday

RE: overprovisioning of local storage

fc1ca/ 940622c32fb0326dd2b081304edb809b66d4c751). So the documentation needs an update. Regards, Somesh -Original Message- From: Somesh Naidu [mailto:somesh.na...@citrix.com] Sent: Monday, February 01, 2016 3:03 PM To: users@cloudstack.apache.org Subject: RE: overprovisioning of local storage As pe

RE: overprovisioning of local storage

As per 4.6 docs, storage overprovisioning is only supported with NFS when using XenServer, refer http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/4.6/choosing_deployment_architecture.html. I have not come across a feature request for implementing this feature for local stor

RE: CloudStack and VMware VM deploy issue

Can you check if SSVM is able to talk to the vCenter on port 80? Regards, Somesh -Original Message- From: Cristian Ciobanu [mailto:cristian.c@istream.today] Sent: Wednesday, January 27, 2016 4:32 PM To: users@cloudstack.apache.org Subject: Re: CloudStack and VMware VM deploy issue Hell

RE: Failed to create templatecreate ( CloudStack 4.5.2 VMware 5.5 )

VMware 5.5 ) Hi Somesh,    Please see the full log, i reproduced the error again.     1. Install Windows 2008 from iso     2. Create template from Windows 2008 ROOT VOLUME Please see the logs: http://pastebin.com/XfmqNeRa Thank you ! Regards, Cristian On 27.01.2016 01:02:15, Somesh Naidu w

RE: unable to create VPN connection for Site-To-Site VPN

Sonali, Try looking up logs for Seq 4-3491697086095716136 in the other management server log. Regards, Somesh -Original Message- From: Sonali Jadhav [mailto:son...@servercentralen.se] Sent: Monday, January 25, 2016 5:42 AM To: users@cloudstack.apache.org Subject: RE: unable to create

RE: Failed to create templatecreate ( CloudStack 4.5.2 VMware 5.5 )

Is there a defect filed for this? We will need more logs (at least the entire stack trace) to be able to understand what is happening. Regards, Somesh -Original Message- From: Cristian Ciobanu [mailto:cristian.c@istream.today] Sent: Tuesday, January 26, 2016 9:58 AM To: users@cloudsta

RE: CloudStack and VMware VM deploy issue

The problem seems to be pointed out by the below lines in the log: 2016-01-26 06:29:33,821 DEBUG [o.a.c.e.o.VolumeOrchestrator] (Work-Job-Executor-25:ctx-7bfca42f job-78/job-79 ctx-67168166) Unable to create Vol[15|vm=12|ROOT]:Failed to create a Vmware context, check the management server logs

RE: Quick note about $dayjob

Good luck and I hope the best for your new venture! Regards, Somesh -Original Message- From: Sebastien Goasguen [mailto:run...@gmail.com] Sent: Tuesday, January 26, 2016 9:31 AM To: d...@cloudstack.apache.org Cc: market...@cloudstack.apache.org; users@cloudstack.apache.org Subject: Quick

RE: Unable to add hosts

Jay, I missed asking earlier, what host are you working with, KVM? Regards, Somesh From: sayed jahed hussini [mailto:sjahed_hussini...@yahoo.com.INVALID] Sent: Tuesday, December 15, 2015 8:59 AM To: Paul Angus; users@cloudstack.apache.org; Somesh Naidu Subject: Re: Unable to add hosts I tried

RE: Unable to add hosts

See if updating nss package on your management server helps resolve this. (http://mail-archives.apache.org/mod_mbox/cloudstack-users/201511.mbox/%3c5a4fe8efa8c8584cbefeeacd9aa077ee61228...@sinpex01cl02.citrite.net%3E) Somesh CloudPlatform Escalations Citrix Systems, Inc. -Original Message---

RE: CloudStack fails to deploy SSVM

| 0 | NULL | +-+--+--+---+--++++---++--+---+--+-+-+-++---+-++-+---+ 1 row in set (0.00 sec) 2015-12-04 0:45 GMT+01:00 Somesh Naidu : > > So,

RE: Failed CloudStack 4.6 Upgrade

Justin, to add to what Daan suggested, before you re-run the upgrade, ensure that you have reverted the DB (using the DB dump collected just prior to the upgrade) to avoid errors due to duplicate entries/columns. Somesh CloudPlatform Escalations Citrix Systems, Inc. -Original Message- F

RE: CloudStack fails to deploy SSVM

er. So, I assume the missing pool is the secondary storage pool. do we have a chicken & egg problem: to deploy the SSVM I need the secondary storage and to access the secondary storage I need the SSVM Regards Bernhard 2015-12-02 23:28 GMT+01:00 Somesh Naidu : > The reason for SSVM and CPVM

RE: CloudStack fails to deploy SSVM

The reason for SSVM and CPVM not being deployed would quite likely be the same. Here are the errors relevant to SSVM start failure: 2015-12-02 18:19:27,314 INFO [c.c.s.s.SecondaryStorageManagerImpl] (secstorage-1:ctx-f86ee694) Found a stopped secondary storage vm, bring it up to running pool. s

RE: Restoring Cloudstack DB with Missing /etc/cloudstack/management/key

That should be possible. It is not perfectly clear which key is out of sync, but if you are looking to replace the mgmt secret key located in /etc/cloudstack/management/key then you only need to replace the new value for property " db.cloud.encrypt.secret" in /etc/cloudstack/management/db.proper

RE: CPBM

Venkatesh, As others have pointed out, while CPBM supports integration with Apache Cloudstack (ACS), this may not be the right forum for questions on CPBM. You should try posting your questions on CPBM here, http://discussions.citrix.com/forum/1182-cloudportal-business-manager-2x/ Also, the CP

RE: how to assign an instance to a different project ?

I believe this functionality does not exist yet. The only to achieve is to perform manual DB updates but this has not been tested. If you decide to go with the manual DB update approach, you should take care of network association for that VM. Regards, Somesh -Original Message- From: Y

RE: Volume migration not working in asynchronous way | Urgent help !

s time ? 2015-10-14 0:04 GMT+03:00 ilya : > Somesh, > > Not certain how that is going to help the problem with concurrent > tasks.. Please explain.. > > Thanks, > ilya > > On 10/13/15 1:58 PM, Somesh Naidu wrote: > > Can you check what value is set for global

RE: What is Size of a typical ACS production environment?

I have had experience with users (more than 1) having 1000+ hosts and of course, I am talking 1 ACS deployment. Regards, Somesh -Original Message- From: Rafael Weingärtner [mailto:rafaelweingart...@gmail.com] Sent: Wednesday, October 14, 2015 9:42 AM To: users@cloudstack.apache.org Subj

RE: Problem with VolumeMigration, stuck after first migration‏

Ilya, the operation SEQ is based on the host (also referred to as agent). So, this concurrency isn't at the object level but at the host/agent level. In this case, I believe it is SSVM. Have Emil verify this from host table querying for the ID in the SEQ. Regards, Somesh -Original Message

RE: Volume migration not working in asynchronous way | Urgent help !

Can you check what value is set for global configuration parameter "vmware.create.full.clone"? If false, try setting it to true and see if that works. Regards, Somesh -Original Message- From: Emil [mailto:emi...@gmail.com] Sent: Tuesday, October 13, 2015 3:08 PM To: users@cloudstack.ap

RE: table cloud.template_store_ref

Ext +57 (1) 423-5460 | Cel: 3124509565 Cr. 7 #74-56 | Oficina 202 | Bogotá, Colombia http://www.o4it.com | mailto:ym...@o4it.com -Original Message----- From: Somesh Naidu [mailto:somesh.na...@citrix.com] Sent: Thursday, October 01, 2015 11:23 AM To: users@cloudstack.apache.org Subject:

RE: table cloud.template_store_ref

Does not look like vSphere/vCenter 5.5 is supported with 4.3 (http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/4.3/hypervisor_installation.html#vmware-vsphere-installation-and-configuration). Did you correctly prepare the system VM template on the secondary storage? Also, ha

RE: unable to copy template to primary storage

/AADxPeI3Yh7VBFmzZp5mev57a?dl=0 Cordialmente, Yesid Mora | Orchestration Engineer | O4IT PBX: 251 Ext +57 (1) 423-5460 | Cel: 3124509565 Cr. 7 #74-56 | Oficina 202 | Bogotá, Colombia http://www.o4it.com | mailto:ym...@o4it.com -Original Message- From: Somesh Naidu [mailto:somesh.na

RE: unable to copy template to primary storage

al Message----- From: Somesh Naidu [mailto:somesh.na...@citrix.com] Sent: Wednesday, September 30, 2015 7:03 PM To: users@cloudstack.apache.org Subject: RE: unable to copy template to primary storage Yesid, the pictures can’t be attached to the emails to this DL so you’d have to upload it and shar

RE: unable to copy template to primary storage

t(s) and may contain confidential or proprietary information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, immediately contact the sender by reply e-mail and destroy all copies of the original message. -Original Messag

RE: unable to copy template to primary storage

.o4it.com | mailto:ym...@o4it.com -Original Message----- From: Somesh Naidu [mailto:somesh.na...@citrix.com] Sent: Wednesday, September 30, 2015 5:17 PM To: users@cloudstack.apache.org Subject: RE: unable to copy template to primary storage Yesid, please paste the complete exception stack. Al

RE: unable to copy template to primary storage

Yesid, please paste the complete exception stack. Alternately, you could always raise a support ticket with Citrix. Regards, Somesh From: Yesid Mora [mailto:ym...@o4it.com] Sent: Wednesday, September 30, 2015 6:12 PM To: users@cloudstack.apache.org Subject: unable to copy template to primary sto

RE: Dynamic Scalable Template issue

-cl CitrixXenStoreSession $a[0].getvalue("memory/target").value The value returned would represent “real” amount of memory (in KB) available to Windows guest. Regards, Somesh From: Todd Pigram [mailto:t...@toddpigram.com] Sent: Tuesday, September 15, 2015 4:26 PM To: Somesh Naidu Cc:

RE: Dynamic Scalable Template issue

. Somesh CloudPlatform Escalations Citrix Systems, Inc. From: Todd Pigram [mailto:t...@toddpigram.com] Sent: Tuesday, September 15, 2015 11:33 AM To: Somesh Naidu Cc: CloudStack Users Subject: Re: Dynamic Scalable Template issue Is this fixed in 4.5.1 as the issue is not listed in the release notes

RE: Dynamic Scalable Template issue

A similar issue is listed in CCP 4.5 release notes – look for “CS-27425/CS-21217”. Somesh CloudPlatform Escalations Citrix Systems, Inc. From: Todd Pigram [mailto:t...@toddpigram.com] Sent: Wednesday, September 09, 2015 11:22 AM To: CloudStack Users Subject: Re: Dynamic Scalable Template issue

RE: Unable to create a deployment for VM (Additional DATADISK - API-job)

HqqJkryJiRSKKYCDkRoq9l_U0mzBGDQhGkYQ_pHBrrkNY0dM8B8t5gceov6MA","id":"89","response":"json","ctxDetails":"{\"com.cloud.template.VirtualMachineTemplate\":\"e873ac1f-b95b-48be-863e-0d81c5307995\",\"com.cloud.vm.VirtualMachi

RE: listStoragePools does not exist or it is not available for user with id

I hope you realize that this API is only available to ROOT Admin users. Regards, Somesh -Original Message- From: Vadim Kimlaychuk [mailto:va...@kickcloud.net] Sent: Thursday, September 10, 2015 2:00 AM To: users@cloudstack.apache.org Cc: Cristian Ciobanu Subject: Re: listStoragePools do

RE: Unable to create a deployment for VM (Additional DATADISK - API-job)

5-09-10 19:07:19,930 DEBUG [o.a.c.f.j.i.AsyncJobManagerImpl] (API-Job-Executor-91:ctx-71d92d17 job-754) Complete async job-754, jobStatus: FAILED, resultCode: 530, result: org.apache.cloudstack.api.response.ExceptionResponse/null/{"uuidList":[],"errorcode":533,"errortex

RE: Unable to create a deployment for VM (Additional DATADISK - API-job)

Cristian, First off, I would recommend masking information such as apikey, signature, public IPs, etc. when posting on the list for security reasons. The reason for failure as per logs is "InsufficientServerCapacityException" however, from the logs snippets it is not possible to find the root c

RE: Usage Job failed

el Mallela From: Somesh Naidu Sent: ‎Saturday‎, ‎September‎ ‎5‎, ‎2015 ‎12‎:‎45‎ ‎AM To: users@cloudstack.apache.org Cc: d...@cloudstack.apache.org I wrote that article, it was for DB cleanup for 3.x version. I have updated it here for latest versions and added more tables - http://suppor

RE: CCP-4.5.0: Adding additional interfaces are not accepting on VMs if the VM has vm snapshots

Agree with Erik, open a support ticket with Citrix. Regards, Somesh -Original Message- From: Erik Weber [mailto:terbol...@gmail.com] Sent: Tuesday, September 08, 2015 6:15 AM To: users@cloudstack.apache.org Subject: Re: CCP-4.5.0: Adding additional interfaces are not accepting on VM

RE: Usage Job failed

I wrote that article, it was for DB cleanup for 3.x version. I have updated it here for latest versions and added more tables - http://support.citrix.com/article/CTX200918. I believe the error suggests that duplicate entries found when parsing records in table user_statistics for network usage.

RE: HAProxy Max Sessions

Looks like the fullconn parameter you reference. It is supposed to be 10% of maxconn. The maxconn looks like set to default 2000 in your case so what you are seeing seems correct. Check out this link for more details - http://comments.gmane.org/gmane.comp.web.haproxy/9715 There is a global conf

RE: How do I stop Status popup message box?

That is a defect, please file one here - https://issues.apache.org/jira/browse/CLOUDSTACK/ Regards, Somesh -Original Message- From: Yichi Lu [mailto:y...@zenoss.com] Sent: Thursday, August 27, 2015 2:43 PM To: users@cloudstack.apache.org Subject: Re: How do I stop Status popup message b

RE: The agent doesn't reconnect if there are stopped VMs

Original Message- From: Vladimir Melnik [mailto:v.mel...@uplink.ua] Sent: Sunday, August 23, 2015 2:45 AM To: users@cloudstack.apache.org Subject: Re: The agent doesn't reconnect if there are stopped VMs Hello, On Fri, Aug 21, 2015 at 04:41:42PM +, Somesh Naidu wrote: > > If y

RE: duplicate use of tips?

vba T: 09/225 82 91 www.openminds.be On 21 Aug 2015 at 19:08:59, Somesh Naidu (somesh.na...@citrix.com) wrote: Frank, > That’s not really true: This is from the “nics” table in the Database: What about the removed column? Also, did you check the table user_ip_address table for the IPs?

RE: duplicate use of tips?

Frank, > That’s not really true: This is from the “nics” table in the Database: What about the removed column? Also, did you check the table user_ip_address table for the IPs? Are there multiple entries for those? If not then it should not be possible for mgmt server to assign one IP to two VMs

RE: The agent doesn't reconnect if there are stopped VMs

Friday, August 21, 2015 2:42 AM To: users@cloudstack.apache.org Subject: Re: The agent doesn't reconnect if there are stopped VMs I'll gladly send it, but where to find it? I don't have more information in the log-file :( On Thu, Aug 20, 2015 at 03:49:25PM +, Somesh Naidu wrote: >

RE: VM stuck in a failing Host

o.com.co/management-server.log?AWSAccessKeyId=0099c1623d6704f9f5d5&Expires=1440711480&Signature=CFYwowzsJ3x%2B7XXfpAHDLM%2F022A%3D&x-amz-pt=N2ZiYjcyOTk4MTQ0MDEwMzEwNTQ5MA We have a second manage server but it doesn't execute any task. Regards / Cordialmente, Jaime O. Roj

RE: VM stuck in a failing Host

l chain at the beginning. Cordialmente, Jaime Rojas Sent from my iPhone On 20/08/2015, at 1:37 p.m., Somesh Naidu mailto:somesh.na...@citrix.com>> wrote: We do not need to take a snapshot. Just extract the VHD from storage (you could use vdi-copy if it is on block storage) and then r

RE: VM stuck in a failing Host

ling Host We already did all of that and VM keeps trying to start on failed host. Template is not possible we tried to take a snapshot but it return an error. Cordialmente, Jaime Rojas > On 20/08/2015, at 12:19 p.m., Somesh Naidu wrote: > > I do not believe that should happen

RE: VM stuck in a failing Host

To: Subject: Re: VM stuck in a failing Host Yes we could , but I'm not sure if maybe I lost the VM because it is tied to that host. Cordialmente, Jaime Rojas > On 20/08/2015, at 11:47 a.m., Somesh Naidu wrote: > > Can you not remove the failed host from CCP and

RE: VM stuck in a failing Host

/ Cordialmente, Jaime O. Rojas S. Technology Manager jaime.ro...@kumo.com.co Mobile: +57 301-3382382 Office: +57-1-8766767 x215 -Mensaje original- De: Somesh Naidu [mailto:somesh.na...@citrix.com] Enviado el: jueves, 20 de agosto de 2015 11:00 a. m. Para: users@cloudstack.apache.org Asunto

RE: VM stuck in a failing Host

Quick question, what is the state/status of the failed host in CS? Also, look up the particular VM on XS pool (xe vm-list name-label= i-574-14584-VM), what does it say? Regards, Somesh -Original Message- From: Jaime Orlando Rojas Sanchez [mailto:jaime.ro...@kumo.com.co] Sent: Thursday

RE: The agent doesn't reconnect if there are stopped VMs

> 2015-08-18 06:24:46,542 DEBUG [c.c.c.CapacityManagerImpl] > (AgentConnectTaskPool-213:ctx-76903ef6) Found 1 VM, not running on host 27 > 2015-08-18 06:24:46,544 ERROR [c.c.a.m.AgentManagerImpl] > (AgentConnectTaskPool-213:ctx-76903ef6) Monitor ComputeCapacityListener says > there is an error i

RE: CS Manager down: all hypervisors reboot

19 Aug 2015 at 21:46:35, Somesh Naidu (somesh.na...@citrix.com) wrote: > how would this work if primary storage were eg iSCSI?  I believe we perform the heartbeat check and host fencing for NFS storage only.  > Is there no way to disable that, except for modifying kvmheartbeat.sh?  AFAIK, there isn't. 

RE: CS Manager down: all hypervisors reboot

ouwers [mailto:fr...@openminds.be] Sent: Wednesday, August 19, 2015 2:48 PM To: users@cloudstack.apache.org Subject: RE: CS Manager down: all hypervisors reboot On 19 Aug 2015 at 20:44:47, Somesh Naidu (somesh.na...@citrix.com) wrote: Management server down would not result in host being rebooted.

RE: CS Manager down: all hypervisors reboot

Management server down would not result in host being rebooted. Primary storage down will. As you mentioned, you have hosted your primary storage (NFS) on the management server node. So yes, taking it down will cause all host connected to it to reboot. It doesn’t matter how many VMs use that pa

RE: updatecloudtouseobjectstore options

so set to NULL in the database. Kind regards Christian > On 14 Aug 2015, at 19:36, Somesh Naidu wrote: > > Christian, can you try to find the following log message and paste it here, > "Trying to add a S3 store in data center" > > In addition, can you tell me what

RE: Register iso so slow.

1:33 AM To: users@cloudstack.apache.org Subject: Re: Register iso so slow. Hi I have this problem in cloudstack 4.5.1 but after changed this version to previous version the problem vanished. finally iso file registered but in cloudstack 4.4. Thank's On Fri, Aug 14, 2015 at 10:39 PM, Some

RE: Urgent Issue : Cloudstack VM HA not working

ll > fix this, but it would be better anyway. > > Regards, Remi > > > On 14 Aug 2015, at 23:36, Somesh Naidu wrote: > > >> in the cloudDB its running > > > > That would explain why HA did not trigger on the VM. > > > > Is the host ma

RE: KVM - convert vmdk to qcow2 - send volume to CS

> Does the Volumes uploaded always will be DATADISK type? Yes. Regards, Somesh -Original Message- From: Luciano Castro [mailto:luciano.cas...@gmail.com] Sent: Friday, August 14, 2015 11:04 AM To: users@cloudstack.apache.org Subject: Re: KVM - convert vmdk to qcow2 - send volume to CS

RE: Urgent Issue : Cloudstack VM HA not working

PM To: users@cloudstack.apache.org Cc: prapul cool Subject: Re: Urgent Issue : Cloudstack VM HA not working hi, On the xencenter its halted and in the cloudDB its running. The vmsync process is not getting any information about the VM. 2015-08-14 18:46 GMT+03:00 Somesh Naidu : > Fedi, > > I am assuming

RE: Register iso so slow.

.api.storage.DownloadAnswer":{"jobId":"83957b05-5dd7-4e47-9e65-b512f5bed735","downloadPct":0,"errorString":" ","downloadStatus":"NOT_DOWNLOADED","downloadPath":"/mnt/SecStorage/48148529-2b47-39ff-9476-b95d6a4f06ee/template/

RE: updatecloudtouseobjectstore options

Christian, can you try to find the following log message and paste it here, "Trying to add a S3 store in data center" In addition, can you tell me what values are being set in the DB for "scope", "role" and "image_provider_name"? Regards, Somesh -

RE: updatecloudtouseobjectstore options

gt; On 11 Aug 2015, at 22:43, Somesh Naidu wrote: > > I did some digging and think you need to add another key,value - > usehttps,useHttps in the details param to make it work. > > My reference has been following code snippets: > --- > String useHttps = details.get

RE: Deleting Compute Offering

That is correct, you should be able to delete a compute offering even if there are active VMs using it. I just performed a quick test for migrate and stop/start operations work fine. I even performed a Reinstall VM operation (that recreates a VM from template) and it worked fine. Regards, Somes

RE: Urgent Issue : Cloudstack VM HA not working

Fedi, I am assuming VM has HA flag set in its Compute Offering. When you stop the VM from XenCenter, what state is it in XenSever (halted or does it disappear) and in Cloud DB (Running or Stopped)? What does vmsync for that host do with this VM (look at management server logs for this)? Regard

RE: Register iso so slow.

loss >> >> >> round-trip min/avg/max/stddev = 670.263/709.927/749.591/39.664 ms >> >> >> Good: Can ping DNS server >> >> >> ==== >> >> >> Good: DNS resolves download.cloud.com >> >>

RE: Register iso so slow.

====== > Tests Complete. Look for ERROR or WARNING above. > > On Wed, Aug 12, 2015 at 7:32 PM, Somesh Naidu > wrote: > >> Hi Borhan, >> >> > i figure out when i try get iso >> > file on SSVM by wget command (wget http://192.

RE: Register iso so slow.

Hi Borhan, > i figure out when i try get iso > file on SSVM by wget command (wget http://192.168.76.5/isoname.iso) > say cannot write to 'isoname > .iso' (No space left on device). This probably won't work if you were using SSVM's root

RE: XenServer is disconnected after CS hosts shutdown

> starting XS agent manually Either unmanage/manage cluster or perform a force reconnect to the host. Regards, Somesh -Original Message- From: tony_caot...@163.com [mailto:tony_caot...@163.com] Sent: Wednesday, August 12, 2015 5:14 AM To: users@cloudstack.apache.org Subject: Re: XenSer

RE: updatecloudtouseobjectstore options

3.storage details[4].key=protocol details[4].value=https provider=S3 Kind regards Christian > Am 11.08.2015 um 18:36 schrieb Somesh Naidu : > > Christian, > > I am not 100% as I haven’t tried this before but I was thinking the parameter > "URL" would affect this? >

RE: updatecloudtouseobjectstore options

Christian, I am not 100% as I haven’t tried this before but I was thinking the parameter "URL" would affect this? Regards, Somesh -Original Message- From: christian.kir...@zv.fraunhofer.de [mailto:christian.kir...@zv.fraunhofer.de] Sent: Tuesday, August 11, 2015 11:22 AM To: users@cl

RE: Insufficient address capacity (despite plenty of addresses left)

> Yes, all were taken. I changed the "description" field in the "vlan" > table, let's see if it helps. Or do I have to change something else? > > Ciao > > Martin > > -Ursprüngliche Nachricht- > Von: Somesh Naidu [mailto:somesh.na...@citrix.com]

RE: Removing a Secondary Storage Host from a Zone which has Two Secondary Storage Hosts

That procedure should work but for some tweaks like "template_host_ref" to "template_store_ref". Regards, Somesh -Original Message- From: Valerio Guaglianone [mailto:v.guaglian...@midhgard.it] Sent: Friday, August 07, 2015 11:45 AM To: users@cloudstack.apache.org Subject: Removing a Se

RE: Insufficient address capacity (despite plenty of addresses left)

about 10.13.0.2 to 10.13.0.149? I could not find an address range limit via the GUI, but there seems to be one (which I might even have configured myself some time ago)... Ciao Martin -Ursprüngliche Nachricht----- Von: Somesh Naidu [mailto:somesh.na...@citrix.com] Gesendet: Donnerstag, 6

RE: Unable to download a volume

Carlos, I agree the UI behavior is not intuitive. This should be considered as a valid enhancement request and I encourage you to file one. As for the volume download behavior, I can confirm that this is by-design, volume inherits the extractable flag from the template it is created from. Regar

RE: Insufficient address capacity (despite plenty of addresses left)

Martin, Can you check the user_ip_address table and see if the IPs in that network are marked as being used (though incorrectly). Regards, Somesh -Original Message- From: Martin Emrich [mailto:martin.emr...@empolis.com] Sent: Thursday, August 06, 2015 11:21 AM To: users@cloudstack.apa

Improving API reference pages

{should you be adding [DISCUSS] and/or [PROPOSAL] to the subject?} +1 Definitely required. Improvements in description/function required for both the API call itself and associated parameters. I am willing to help with the content. Regards, Somesh -Original Message- From: Dave Dunawa

RE: Cloudstack support

> Take Citrix, for instance. It offers specific version of Cloudstack together > with XenServer hypervisor. Don't know whether they offer CS over KVM, hyper-V > or VmWare, but I can hardly imagine any company can offer "whatever CS can > do". I can confirm that Citrix provides support for CS ac

RE: Virtual Router disks run full: How to fix?

Daan, I believe Martin has Xenserver as hypervisor (got this from another thread) so your solution might work for him. Martin - you should be able to SSH to virtual router on all hypervisors (XS/KVM/VMware). The procedure is mentioned at the below link (it is for SSVM but works for all system/r

RE: Remove nic error

frica > > > > Phone: +27 21 527 0091 | Mobile: +27 73 917 4111 > > glenn.wag...@shapeblue.com | www.shapeblue.com | Twitter:@shapeBlue > ShapeBlue SA (Pty) Ltd, 2nd Floor, Oudehuis Centre, 122 Main Rd, Somerset > West, Cape Town 7130 > > -Original Message- > From:

RE: Xen Host changed IP

That should work. You may not necessarily need to stop the mgmt server but it is safer to do so. Regards, Somesh -Original Message- From: Carlos Reategui [mailto:create...@gmail.com] Sent: Monday, July 27, 2015 5:16 PM To: users@cloudstack.apache.org Subject: Xen Host changed IP HI Al

RE: Deployment failed on XenServer due to capacity miscalculation

This is mostly due to incorrect calculation of XS memory overhead calculation by cloudstack. However, it is expected that the VMs launch is retried on other available host in cluster. Regards, Somesh -Original Message- From: Martin Emrich [mailto:martin.emr...@empolis.com] Sent: Monda

RE: Remove nic error

ticket https://issues.apache.org/jira/browse/CLOUDSTACK-8328 > @Daan: should I add ticket for overzealous exception handling ? > > /Sonali > > -Original Message- > From: Somesh Naidu [mailto:somesh.na...@citrix.com] > Sent: Tuesday, March 10, 2015 8:00 PM > To: users@cl

RE: Stop Instance on VMware hypervisor

Behavior on VMware is different than XS. The VMs are not removed/destroyed and remain accessible in vCenter. Regards, Somesh -Original Message- From: Gijsbert Janssen van Doorn [mailto:gijsb...@zerto.com] Sent: Monday, July 27, 2015 10:56 AM To: users@cloudstack.apache.org Subject: Stop

RE: Cloudstack support

Oh yeah! PSI cloud is a great option. Know that they have the oldest/first and most experienced support personnel to ever provide formal support for Cloudstack. Regards, Somesh -Original Message- From: Ahmad Emneina [mailto:aemne...@gmail.com] Sent: Friday, July 24, 2015 9:36 AM To: Cl

RE: Cloudstack support

Yes, Citrix, Shapeblue to name a few. Regards, Somesh -Original Message- From: Orlando Sánchez [mailto:tecnologia.8...@outlook.com] Sent: Thursday, July 23, 2015 1:38 PM To: users@cloudstack.apache.org Subject: Cloudstack support Hello Everybody, I am sorry for the off topic but I am

RE: Can´t take snapshot - CS 4.5.1

!! thanks On Wed, Jul 22, 2015 at 2:50 PM, Somesh Naidu wrote: > Luciano, > > Is this with KVM or Xenserver? > > Regards, > Somesh > > > -Original Message- > From: Luciano Castro [mailto:luciano.cas...@gmail.com] > Sent: Wednesday, July 22, 2015 12:54 PM

RE: Can´t take snapshot - CS 4.5.1

Luciano, Is this with KVM or Xenserver? Regards, Somesh -Original Message- From: Luciano Castro [mailto:luciano.cas...@gmail.com] Sent: Wednesday, July 22, 2015 12:54 PM To: users@cloudstack.apache.org Subject: Can´t take snapshot - CS 4.5.1 Hi ! I´m trying to do some snapshots, but

RE: Disaster Recovery

Cloudstack consists of multiple moving parts - cloud infra (as in MS/DB), hypervisor, storage, etc. Each of these parts entail an independent/separate approach from a DR perspective. VMs can be backed up and recovered via volume snapshots. Explore Volume Snapshots, creating Template from Snapsh

RE: HA feature - KVM - CloudStack 4.5.1

umpPath=/var/log/cloudstack/management/ -XX:PermSize=512M >>> -XX:MaxPermSize=800m >>> >>> -Djava.security.properties=/etc/cloudstack/management/java.security.ciphers >>> -classpath >>> >>> :::/etc/cloudstack/management:/usr/share/cloudstack-manag

RE: HA feature - KVM - CloudStack 4.5.1

54 PM To: users@cloudstack.apache.org Subject: Re: HA feature - KVM - CloudStack 4.5.1 On 17/07/2015 22:26, Somesh Naidu wrote: >> Perhaps, the management server don't reconize the host 3 totally down >> (ping alive? or some quorum don't ok) >> The only way to the mgt server to a

RE: HA feature - KVM - CloudStack 4.5.1

Milamber [mailto:milam...@apache.org] Sent: Friday, July 17, 2015 6:01 PM To: users@cloudstack.apache.org Subject: Re: HA feature - KVM - CloudStack 4.5.1 On 17/07/2015 21:23, Somesh Naidu wrote: > Ok, so here are my findings. > > 1. Host ID 3 was shutdown around 2015-07-16 12:19:09 at which po

  1   2   3   >