On Thu, Nov 19, 2015 at 10:21 PM, David Roberson wrote:
The counts for elements of that m value appear quite small when compared to
> the other elements. Also, why on earth would anyone use such an expensive
> element if a dirt cheap one can substitute? My suspicion is that this is a
> dead end
Electrical production has been done in the Papp engine. I go back to the
Papp engine that was self powered by recycling overunity electrons produced
by the LENR reaction.
Look at starting at 21:10 of the video below. Watch the motor driven by the
feedback current gathered by the thorium filled buc
Why does the Mills sun cell produce a ton of visible light?
https://qph.is.quoracdn.net/main-qimg-93a6d0d0564a0d9bbc0e35ec5e65c5b1?convert_to_webp=true
[image: Inline image 1]
Mills explodes copper and water in an high amperage low voltage arc. Like
gold and silver, copper reflect best at visib
First it must be determined that nickel based systems can not generate
electricity in the same general manner. So far we have not actually seen
proof that either metal works all that well. I remain skeptical until more
evidence becomes available in support of this concept.
I wonder what fra
We briefly discussed an idea similar to what you show Eric. It seems logical
to me that magnetic and electric forces should have been the major factors that
allowed for the building of bodies in the solar system. They are a zillion
times larger than puny gravity especially for very small bodie
It is fairly easy to underestimate the power of cavitation. I suppose that if
you consider symmetrical bubble collapse it is possible to imagine enormous
pressure generated due to the momentum of the collapsing liquid being
preserved. In a way this reminds me of the shaped charges that can rea
You are most welcome Jack. I am happy to hear that you have a system that is
holding up so well. Your experience should pay off soon if anyone can achieve
positive results. Let me know when you observe some more interesting results
similar to what you had a few months ago!
My computer model
The cost is cheap if the reactor can produce electricity directly.
On Thu, Nov 19, 2015 at 11:21 PM, David Roberson wrote:
> The counts for elements of that m value appear quite small when compared
> to the other elements. Also, why on earth would anyone use such an
> expensive element if a dir
The counts for elements of that m value appear quite small when compared to the
other elements. Also, why on earth would anyone use such an expensive element
if a dirt cheap one can substitute? My suspicion is that this is a dead end
idea if production costs are taken into consideration.
Dave
We have touched upon this subject in the past and I agree with your assessment.
But, another possible way to look at this apparent violation is to consider
the system as being larger than just the local liquid that is cooled. A heat
pump takes heat away from one region, leaving it cooler, whil
http://www.nist.gov/calibrations/upload/ao17-4.pdf
The Deuterium lamp can be instructive in explaining why Rossi likes the
E-Cat X reactor so much, why Holmlid's reaction is superior to the Rossi
low temperature Ni/H reaction, and why arc discharge is the best stimulator
of the LENR reaction. Thi
On Wed, Nov 18, 2015 at 11:52 PM, Lennart Thornros
wrote:
Still want to know what is not logical in the 'electrical universe'. I know
> I am in over my paygrade so I am Ok to take a hit or two. Just curious why
> the idea has not become more accepted. So let me have it.:)
>
Is the "electrical un
This is a cavitation device. Who here understands cavitation? (show of hands)
https://goo.gl/MPifJd
How does this happen under conservation laws?
There are indications of energetic neutrons and gammas resulting from
cavitation.
Thank you very much for the explanation Dave. That should add another tool
for detecting and/or enhancing excess heat. My resistance wire is holding
up quite well in an experiment I'm currently running affording a chance to
try many different things to help determine what is going on.
On Thu, No
Here is a video of a cell operating at 1.2 volts. Production is not great,
but it is making hydrogen.
The inventor says this triple electrode will produce hydrogen as low as .8
volts.
It is 95% efficient - indicating that the missing energy is coming from
ambient water temperature or ambient ph
On Thu, Nov 19, 2015 at 7:34 PM, David Roberson wrote:
Rossi has never mentioned palladium use within his reactors Axil. That is
> your thought as far as I am aware.
>
I don't know whether Rossi is now using or has used palladium in the past.
But one detail in the Lugano report that only became
On Thu, Nov 19, 2015 at 5:38 PM, Jed Rothwell wrote:
> The book "Tomorrow's Energy" by Hoffman says that they have been
> transporting large amounts of hydrogen in the pipeline in Germany since the
> 1930s with few problems. I do not know the details.
It has been studied quite well
https://en.wi
In reply to David Roberson's message of Thu, 19 Nov 2015 20:36:53 -0500:
Hi,
[snip]
>Does this not violate a thermodynamic law? Some of us are lawless.
Since this can actually be done, if it does violate a thermodynamic law, then
the law needs to be rewritten. ;)
This is a case of kinetic energ
This is a deduction based on Rossi's patent. The E-Cat X runs at high
temperatures higher than the Hot Cat. Rossi also has had problems with
structural failures in the E-Cat X because of high temperature operation.
It is doubtful that nickel can handle long term high temperature reactor
operations.
Does this not violate a thermodynamic law? Some of us are lawless.
Dave
-Original Message-
From: mixent
To: vortex-l
Sent: Thu, Nov 19, 2015 3:31 pm
Subject: Re: [Vo]:Georgia Institute of Technology report on Hydrodynamics gadget
In reply to Jones Beene's message of Wed, 18
Rossi has never mentioned palladium use within his reactors Axil. That is your
thought as far as I am aware.
Dave
-Original Message-
From: Axil Axil
To: vortex-l
Sent: Thu, Nov 19, 2015 2:20 pm
Subject: Re: [Vo]: How many atoms to make condensed matter?
In the Co-depositio
Jack, I would expect the output power to be greater for your first case(1) due
to the tendency of the core activity to 'stick' longer at the highest
temperature. This effect is mainly due to the time constant being lengthened
by the positive feedback acting like a negative resistance. When you
wrote:
> >Transport of H2 is a major problem. Embrittlement of pipelines is
> problematic.
>
> Use pipes with an inner plastic film.
>
The book "Tomorrow's Energy" by Hoffman says that they have been
transporting large amounts of hydrogen in the pipeline in Germany since the
1930s with few pro
https://en.wikipedia.org/w/index.php?title=Special:Book&bookcmd=download&collection_id=9a19cfad4f4b092deac60f097f1fb95dac068d15&writer=rdf2latex&return_to=Electromagnetic+absorption+by+water
Why is water a very good friend to the Ni/H reaction and an enemy to the
Pd/D reaction?
In nanoplasmonics,
In reply to Terry Blanton's message of Wed, 18 Nov 2015 21:43:49 -0500:
Hi,
[snip]
>Transport of H2 is a major problem. Embrittlement of pipelines is problematic.
Use pipes with an inner plastic film.
Regards,
Robin van Spaandonk
http://rvanspaa.freehostia.com/project.html
In reply to Jones Beene's message of Wed, 18 Nov 2015 16:08:41 -0800:
Hi,
[snip]
>BTW if slight gain is found, it would probably exploit the gap between the
>potential which needed to split water, which is as low as 1.23 volts, and the
>energy of recombination which can be slightly higher. Cat
On Thu, Nov 19, 2015 at 1:20 PM, Axil Axil wrote:
This means that the palladium chloride envelope is the active LENR factor
> and not the hydrogen deposited on the electrode.
This sounds likely to me, although hydrogen may help out.
As Rossi has done on the E-Cat X, palladium powder used in a
On Thu, Nov 19, 2015 at 6:08 AM, Roarty, Francis X <
francis.x.roa...@lmco.com> wrote:
> Axil, Jones,
>
> Good insights and dot connecting, would it apply to Patterson
> beads submerged in water with a lithium sulfate (Li2SO4) electrolyte
> solution? (Li2SO4) vs palladium chloride abs
In the Co-deposition video, the narrator says that the reaction sets in
withing minutes for the start of Co-deposition even though the current is
at very low power levels maintained at Co-deposition initialization.
During Co-deposition initiation no hydrogen is deposited until three atomic
levels
I have been working on an algorithm to detect excess heat in a slightly
different way, but wanted to see if others could perhaps provide some
insight.
Here are my thoughts:
1) utilize an on/off heating and cooling cycle within a specified range
(e.g., 1000-1200C) - input power turns off at 1200C
Let me point out something else about this report.
The author ascribes the change from the COP of 75% to 100% to instrument
inaccuracy. Yet it is not only the instruments which detect this effect.
The observer can see and hear that something is happening.
When this anomalous heat effect turns on,
Axil, Jones,
Good insights and dot connecting, would it apply to Patterson beads
submerged in water with a lithium sulfate (Li2SO4) electrolyte solution?
(Li2SO4) vs palladium chloride absorption of UV? His claim that it would
neutralize radiation without emitting harmful radiation
32 matches
Mail list logo