Re: [weewx-user] Cleaning up old 'bad' data

It's practical to restore from WU but that comes with its own set of issues - so may not advance you to where you want to be!! In any case the WU data will also contain the bad data won't it?? 1. stop weewx 2. Take a copy of your sdb as a backup 3. Try the removals again - and keep a note of

[weewx-user] Re: How to differentiate when using two SDR usb dongles for two different frequencies.

Thanks Ruben, I will give a try and let you know how it goes. On Monday, February 25, 2019 at 9:43:24 PM UTC, Ruben Navarro Huedo wrote: > > have a look at this. > > https://www.rtl-sdr.com/forum/viewtopic.php?t=2073 > > You need set a seral in each rtlsdr. > After you must use that serial with

Re: [weewx-user] Re: SDR driver issue

Thanks for your feedback s32767. Yes it has now been identified as a WH32B. I will keep my eyes peeled for any updates from rtf_433. I am attempting to use an additional dongle with a WH25 @ 433Mhz until the WH32B is fixed. See new thread here

[weewx-user] Re: How to differentiate when using two SDR usb dongles for two different frequencies.

have a look at this. https://www.rtl-sdr.com/forum/viewtopic.php?t=2073 You need set a seral in each rtlsdr. After you must use that serial with rtl_433 El lunes, 25 de febrero de 2019, 18:59:15 (UTC+1), steep...@gmail.com escribió: > > I am using two identical SDR usb dongles to receive

[weewx-user] Re: How to differentiate when using two SDR usb dongles for two different frequencies.

On Monday, February 25, 2019 at 9:59:15 AM UTC-8, steep...@gmail.com wrote: > > I am using two identical SDR usb dongles to receive streams from two > different frequencies, namely 433Mhz and 868Mhz > The problem I have is to how to allocate one dongle to each of the two > configurations. > >

[weewx-user] Re: SDR driver issue

I think you probably have the WH32B which is an indoor sensor with barometric pressure. If that's true, I think your problem is that the WH32B isn't supported yet in rtl_433, although there is some work on it. In addition, you will need to change this line in your weewx.conf file radiation =

Re: [weewx-user] Cleaning up old 'bad' data

"*If data you removed is still there then you have operationally done something wrong*." Thanks Andrew for mentioning this, that's likely what has happened - I screwed something up and only thought I had removed the bogus data. In answer to your other questions, I tried to follow verbatim

Re: [weewx-user] Cleaning up old 'bad' data

Just to be clear: the daily summaries are not used for the plots. They are pure archive data. On Mon, Feb 25, 2019 at 10:31 AM Andrew Milner wrote: > What did you actually do to nullify the data? Pointing me to the > documentated procedure does not tell me what commands you actually gave!!! >

Re: [weewx-user] Cleaning up old 'bad' data

What did you actually do to nullify the data? Pointing me to the documentated procedure does not tell me what commands you actually gave!!! Did you do BOTH parts of the procedure ie did you clean the archive data AND regenerate the daily summaries as specified by dropping daily and

Re: [weewx-user] Cleaning up old 'bad' data

Hi Andrew, Earlier in this thread, rainRate and rain values were nullified in accordance with https://github.com/weewx/weewx/wiki/Cleaning-up-old-%27bad%27-data#cleaning-archive-data On Monday, February 25, 2019 at 11:27:47 AM UTC-5, Andrew Milner wrote: > > I am having difficulty

Re: [weewx-user] Cleaning up old 'bad' data

Hi Andrew, Yes, in accordance with https://github.com/weewx/weewx/wiki/Cleaning-up-old-%27bad%27-data#daily-summaries On Monday, February 25, 2019 at 9:29:28 AM UTC-5, Andrew Milner wrote: > > did you delete the bad data from the archive AND the daily summary tables > ??? To remove from daily

[weewx-user] TFA Nexus and UV-Index?

Hi, I use the weather station TFA Nexus (35.1075). I am now interested in the value UV index. From TFA there is the solar wind sensor (30.3168). Unfortunately I find unclear information whether the wind sensor also transmits the UV index. If someone uses this wind sensor here and can tell me

Re: [weewx-user] Re: Second crash after 11 days

I meant 11rc3. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit

Re: [weewx-user] Re: Second crash after 11 days

Tom..I will put 11rc2 back and let it run for at least 24 hours. Then, we will know for sure if there is an increase in memory usage. I will post the results. Steve -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group

Re: [weewx-user] Cleaning up old 'bad' data

I am having difficulty understanding exactly what you mean. What DATA in the database did you update, how did you update it, and how is it not being shown in the .png graphs?? On Monday, 25 February 2019 16:29:28 UTC+2, Andrew Milner wrote: > > did you delete the bad data from the archive

Re: [weewx-user] Problems with customizing seasons skin (graphiks)

Hi Thomas, I found my mistake. In skin.conf i have as the entry dayTemp4 but in in index.html.tmpl i have the entry daytemp4 t vs. T Typical beginner error from a windows user ;) Greetings Michael Am Sonntag, 24. Februar 2019 22:15:31 UTC+1 schrieb Thomas Keffer: > > It probably wasn't

Re: [weewx-user] Cleaning up old 'bad' data

did you delete the bad data from the archive AND the daily summary tables ??? To remove from daily summary tables you either need to massage them manually or drop the summary tables and then rebuild them. On Monday, 25 February 2019 16:19:23 UTC+2, V. Kelly Bellis wrote: > > Yes! But the

Re: [weewx-user] Cleaning up old 'bad' data

Hello Andrew, Thank you for the reply. Sorry didn't see it until after my reply to Tom. I've tried as you suggested deleting all html and png files: [image: remove em all.PNG] And the results were the same, the updated and bad data purged from weewx.sdb isn't reflected in the freshened

Re: [weewx-user] Cleaning up old 'bad' data

….. and you can always change the graph titles to make them more explanatory if you wish eg daily rain totals for past 7 days or daily rain total for past 30 days or weekly rain totals for past 12 months. Each graph has the date and time of creation at the bottom. On Monday, 25 February 2019

Re: [weewx-user] Cleaning up old 'bad' data

Yes! But the curious part: the newly generated .pngs are not reflecting the purged bad data. On Monday, February 25, 2019 at 9:15:33 AM UTC-5, Thomas Keffer wrote: > > If you're running weewxd, they will be regenerated at the end of the next > archive interval. > > Or, you can use wee_reports

Re: [weewx-user] Cleaning up old 'bad' data

The simplest way is to delete ALL .png's *.png, and ALL HTML files *.html to force ALL pages and pngs to be recreated On Monday, 25 February 2019 16:10:02 UTC+2, V. Kelly Bellis wrote: > > Thank you for the reply Tom. > > I've deleted weekrain.html, weekrain.png, monthrain.html,

Re: [weewx-user] Cleaning up old 'bad' data

If you're running weewxd, they will be regenerated at the end of the next archive interval. Or, you can use wee_reports . -tk On Mon, Feb 25, 2019 at 6:10 AM V. Kelly Bellis wrote: > Thank you for the reply Tom. > > I've deleted

Re: [weewx-user] Cleaning up old 'bad' data

Thank you for the reply Tom. I've deleted weekrain.html, weekrain.png, monthrain.html, monthrain.png, yearrain.html, and yearrain.png and presume there's no way to compel regeneration from what you've stated - is that correct? Kind regards, Kelly On Monday, February 25, 2019 at 8:12:28 AM

Re: [weewx-user] Re: Second crash after 11 days

I haven't been using TOP to monitor memory usage - I have cmon running and note the total memory use is creeping up. I restarted this station a couple of times yesterday. I had a request to show the freezing level on some charts - ended up setting soilTemp4 to 32 degrees and including it on

Re: [weewx-user] Cleaning up old 'bad' data

Unfortunately, with the present image generator, it's not possible to use dynamic captions. They have to be static. So, the inclusive dates cannot be included in them. As for how long... the images get regenerated as often as their aggregation period. So, if you have a daily total, it will get

Re: [weewx-user] Cleaning up old 'bad' data

RE: https://github.com/weewx/weewx/wiki/Cleaning-up-old-'bad'-data#regenerate-web-pages Under the section heading *Regenerate web pages*, "Most old web pages and plots will be automatically regenerated, *but it may take a while.*" Consider expanding on what *a while* is predicated on in the

Re: [weewx-user] I need help viewing the archive of Davis vantage vue + RPi3 + weewx user

Well you already have the data in a file - weewx.sdb - the database file!!! You can convert the archive table inside the database to a .csv file just by using the SQLite commands http://www.sqlitetutorial.net/sqlite-tutorial/sqlite-export-csv/ should tell you how to do this. Your best

Re: [weewx-user] I need help viewing the archive of Davis vantage vue + RPi3 + weewx user

Thanks for the replay, what I'm trying to do is basically collecting accumulated data from the weather station and storing it into an excel file (or text file), it doesn't matter the way of creating the data file as long as the results contain the basic weather variables (OutTemp, InTemp,

Re: [weewx-user] I need help viewing the archive of Davis vantage vue + RPi3 + weewx user

It would help if you were much more specific!! Yes, a csv file can be created instead of a .html file by adding a new 'report' using a template for example called newreport.csv.tmpl and have cheetah create the file every archive interval. Note - every archive interval will keep overwriting