Could you email your XF86Config?
Does anyone know if this is likely to work with a trident cyberblade?
thanks
jeremy
Thomas Estaben wrote:
Try to search some documentation about the Xinerama extension of
Xfree. I use
it with a mobility 7500, and i have no problem with Dual-Head.
Tom
On
the CRT device is the first screen while the LCD is the second one. May I
change it?
I sent my XF86Config file.
However, wheter i set TwinMode off, i can use the hot keys to switch between
my monitors but when I try to use LCD+CRT togheter (as TwinMode=on and
Orientation=Clone) the LCD resolution
Try to search some documentation about the Xinerama extension of Xfree. I use
it with a mobility 7500, and i have no problem with Dual-Head.
Tom
On Saturday 23 November 2002 02:15, Hugh Caley wrote:
I have a new Dell Latitude 640 laptop, and would like to run a second
monitor from the SVGA
I searched for information about running multi-head Gnome GDM (or XDM)
sessions with XFree, but couldn't really find anything to indicate that
it was possible. As a matter of fact, some of the gnome mailing lists
basically said, Wait for gnome 2.2.
However, I did manage to get it working.
I have a new Dell Latitude 640 laptop, and would like to run a second
monitor from the SVGA output. This works fine from Win XP, but I can't
figure out how to get it to work under RedHat 8.0/XFree86 4.2. Is it
possible? The output, when it works, seems to be only mirrored. It
evidently
Okay, I've got the second monitor to switch on, but the Gnome desktop
doesn't extend to it. Also, X isn't repainting the screen right, I get
GUI fragments a lot especially when scrolling with the mouse. Here's my
config and my log files...
--
-- Ignacio Valdes,MD,MS Editor: Linux Medical
I'm sorry if this has been covered before, but I could not find it in the
archives.
I have Mandrake 8.2 running on a Celeron 700 machine with two video cards
that I used under Windows98 for dual monitor support. I believe they are a
trident 9750, and the other an S3Virge of some sort (obviously,
I currently upgraded my system from Redhat 6.2 to 7.3. I used to
control multiple monitors in Redhat 6.2 using XiGraphics accel-x
software. I am tyring to get the dual werking under XFree86 4.2.0
using xinerama and am running into problems. I have two of the same
monitors (ViewSonic G810-2)
I'm sorry if this has been covered before, but I could not find it in the
archives.
I have Mandrake 8.2 running on a Celeron 700 machine with two video cards
that I used under Windows98 for dual monitor support. I believe they are a
trident 9750, and the other an S3Virge of some sort (obviously,
On Sat, 5 Oct 2002, Rick Seiden wrote:
I'm sorry if this has been covered before, but I could not find it in the
archives.
I have Mandrake 8.2 running on a Celeron 700 machine with two video cards
that I used under Windows98 for dual monitor support. I believe they are a
trident 9750, and
Okay, I've got the second monitor to switch on, but the Gnome desktop
doesn't extend to it. It is just blank and the cursor won't go onto it
as well. Also, my primary monitor somehow changed from the AGP/Radeon to
the PCI/Nvidia but I want it to be the other way around. I could
probably just
It works now. Didn't change anything, just rebooted and poof! both
screens work. Thanks! -- IV
___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
On Wed, 25 Sep 2002, Ignacio Valdes wrote:
Okay, I've got the second monitor to switch on, but the Gnome desktop
doesn't extend to it. It is just blank and the cursor won't go onto it
as well.
Can I see the /var/log/XFree86.0.log from that?
Which card is it that is blank?
Which card
(==) Using config file: /etc/X11/XF86Config-4
You're reading the wrong config file. The one you posted was an
XFree86 version 3 config file. By the looks of the server output,
your config file isn't even setup for multihead.
Mark.
Ack, I am using digest
On Tue, 24 Sep 2002, Ignacio Valdes wrote:
(==) Using config file: /etc/X11/XF86Config-4
You're reading the wrong config file. The one you posted was an
XFree86 version 3 config file. By the looks of the server output,
your config file isn't even setup for multihead.
On Sat, 21 Sep 2002, Ignacio Valdes wrote:
Hello,
I've not gotten a response before from this list and I kind of need this
to do some work so I'm offering a $10 check to the first person who
helps me get this working right. I have a Athlon XP 1800+/Asus RedHat
7.3 system with a PCI
On Sun, 22 Sep 2002, Ignacio Valdes wrote:
On Sat, 21 Sep 2002, Ignacio Valdes wrote:
Hello,
I've not gotten a response before from this list and I kind of need this
to do some work so I'm offering a $10 check to the first person who
helps me get this working right. I have a
On Fre, 2002-09-20 at 15:00, Geoffrey wrote:
I've played around with trying to get my dual head hardware working, ATI
Radeon VE with vga and digital out. I've tried all kinds of
configurations to no avail. The best I get is a mirrored image on both
monitors.
I'm including the entries
Hello,
I've not gotten a response before from this list and I kind of need this
to do some work so I'm offering a $10 check to the first person who
helps me get this working right. I have a Athlon XP 1800+/Asus RedHat
7.3 system with a PCI GeForce2 MX 200 card and a AGP Radeon 7500 all in
On Sat, 21 Sep 2002, Ignacio Valdes wrote:
Hello,
I've not gotten a response before from this list and I kind of need this
to do some work so I'm offering a $10 check to the first person who
helps me get this working right. I have a Athlon XP 1800+/Asus RedHat
7.3 system with a PCI
Hi
I am trying to get XFree86 to work with two monitors with a SIS
6326 card and an ATI Rage Fury 128 card. I can get it to work with one
of them at a time but it refuses to work with both of them. My
configuration is below and I have attached the XFree86 log. Could
somebody tell me what
On Fre, 2002-09-20 at 12:54, Charlie Grosvenor wrote:
I am trying to get XFree86 to work with two monitors with a SIS
6326 card and an ATI Rage Fury 128 card. I can get it to work with one
of them at a time but it refuses to work with both of them. My
configuration is below and I have
On Fri, 20 Sep 2002, Charlie Grosvenor wrote:
Hi
I am trying to get XFree86 to work with two monitors with a SIS
6326 card and an ATI Rage Fury 128 card. I can get it to work with one
of them at a time but it refuses to work with both of them. My
configuration is below and I have
Thank you that worked.
Charlie
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf
Of Dr Andrew C Aitchison
Sent: 20 September 2002 12:27
To: [EMAIL PROTECTED]
Subject: Re: [Xpert]Dual Head with SIS 6326 and ATI Rage Fury 128
On Fri, 20 Sep 2002, Charlie
I've played around with trying to get my dual head hardware working, ATI
Radeon VE with vga and digital out. I've tried all kinds of
configurations to no avail. The best I get is a mirrored image on both
monitors.
I'm including the entries below I noted from a previous poster because
my
You need to get a newer version of the sis driver from thomas' site.
http://www.winischhofer.net/linuxsis630.shtml
The older ones did not work properly with multiple cards.
Alex
---
Hi
I am trying to get XFree86 to work with two monitors with a SIS
6326 card and an
Hello,
I have a Athlon XP RedHat 7.3 system with a PCI GeForce2 MX 200 card and
a AGP Radeon 7500 card that I'm using to drive two Compaq S700 monitors.
I have set the AGP card in the CMOS as the primary graphic adapter. I
think I have things right in my XF86Config file (Xinerama on, etc),
]
To: [EMAIL PROTECTED], [EMAIL PROTECTED]
Subject: [Xpert]dual-head failure.
Date: Tue, 3 Sep 2002 20:57:21 -0700 (PDT)
MIME-Version: 1.0
Received: from mc2-f30.law16.hotmail.com ([65.54.237.37]) by hotmail.com
with Microsoft SMTPSVC(5.0.2195.5600); Tue, 3 Sep 2002 21:21:25 -0700
Received: from
To the list:
I would like to apologize to the list for my post, I was not aware the editor I was using stripped all of the returns upon paste(and for the dual-post). I will post a fixed message to the newbie-list. Again I apologize for the waste of time I caused anyone, and will not make this
Hello All,
I almost have the dual-had set-up working. I
believe that my set-up files are correct, However I
have included a copy of the relevant log entry, and my
XF86Config-4 file as well. Any help would be much
appreciated.
ATI radeon 7500 agp
with an S3 pci
Thank
AFAIK, yes. The VE definitely does.
--- Kevin Oberman [EMAIL PROTECTED] wrote:
From: Eric Sprague [EMAIL PROTECTED]
Sender: [EMAIL PROTECTED]
Date: Tue, 30 Jul 2002 08:36:18 -0700 (PDT)
Try the ATi Radeon 7500 or VE. Also, the Matrox
G450/G550 are worth a look, but these days, the
Sorry of this ends up being posted twice, but I never seen it hit the list
the first time around, so I am assuming it was lost.
---
I am trying to get dual-head (xinerama) working on DELL OEM'ed Radeon VE. I
am using RedHat 7.3, default install.
Under this configuration, I could not get
Hello,
Im looking at creating a dual headed system for use while developing an
animation tool.
Screen 1 for most of the development/coding work,
Screen 2 for fullscreen playback of the animated sequences
Im looking for advice on a fast 2D graphics card (im not interested in
3D) with good
Try the ATi Radeon 7500 or VE. Also, the Matrox
G450/G550 are worth a look, but these days, the ATi
cards are equally easy to set up, and tend to be
faster. Also, they don't rely on a binary module,
unlike the MGA cards.
The Radeon 7500 should be the fastest. The 8500 should
work too, but I'm
From: Eric Sprague [EMAIL PROTECTED]
Sender: [EMAIL PROTECTED]
Date: Tue, 30 Jul 2002 08:36:18 -0700 (PDT)
Try the ATi Radeon 7500 or VE. Also, the Matrox
G450/G550 are worth a look, but these days, the ATi
cards are equally easy to set up, and tend to be
faster. Also, they don't rely on
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf
Of Eric Sprague
Sent: Tuesday, July 30, 2002 11:36 AM
To: [EMAIL PROTECTED]
Subject: Re: [Xpert]Dual Head + Fast 2D Graphics
Try the ATi Radeon 7500 or VE. Also, the Matrox
G450/G550 are worth
On Tue, 30 Jul 2002 12:14:57 -0400
Randall Watt [EMAIL PROTECTED] wrote:
The mga binary drivers are only necessary for DVI support and certain
PowerDesk features. Other than that, the standard XFree86 supplied
version
of the mga driver should work just fine in either single or dualhead
On Thu, 2002-07-25 at 05:49, Jason Hu Huang wrote:
I have just sloved dri problem with my XFree86.4.2 and Radeon VE 32MB card on
RH7.2.
Now I am moving to fully use the dual head card. I have read a lot articles
regarding the setting of the XF86Configure file to enable the two different
I have just sloved dri problem with my XFree86.4.2 and Radeon VE 32MB card on
RH7.2.
Now I am moving to fully use the dual head card. I have read a lot articles
regarding the setting of the XF86Configure file to enable the two different
output onto two monitors before. The following one is a
On Sun, 2002-07-21 at 07:51, Angus Wallace wrote:
I've got a quick question regarding an ATI Raedon VE dual-VGA-out card.
I've read in several places that the driver doesn't currently support
both dri and dual-head at the same time. Is this still the case?
Yes.
Is it likely to be
Hello,
I've been playing with Dual and Quad head setups. I have noticed a bug
with the second head on every card. The bug is that the DDC information
supplied for the second head is always the same as the information
supplied for the first. That is how it appears in the XFree86.0.log
file,
On Fri, 12 Jul 2002, Pat Suwalski wrote:
Hello,
I've been playing with Dual and Quad head setups. I have noticed a bug
with the second head on every card. The bug is that the DDC information
supplied for the second head is always the same as the information
supplied for the first. That
Hello all,
I have a ATI Radeon 7500 that I am trying to get dual heads working on.
Currently I have a mirror of my desktop on each viewsonic monitor. Below is my
XF86Config-4 file. Thanks in advance for any help anyone can give.
I am running RedHat Linux 7.3 with XFree86 4.2.0
--
On Tue, 2002-07-09 at 11:54, John Gibson wrote:
I have a ATI Radeon 7500 that I am trying to get dual heads working on.
Currently I have a mirror of my desktop on each viewsonic monitor. Below is my
XF86Config-4 file. Thanks in advance for any help anyone can give.
I can only guess
I've got the bus id as noted below, yet I get the same thing, mirrored
images on both monitors.
Radeon VE here.
Michel Dänzer wrote:
On Tue, 2002-07-09 at 11:54, John Gibson wrote:
I have a ATI Radeon 7500 that I am trying to get dual heads working on.
Currently I have a mirror of my
I guess what Michel was trying to say is:
add something like BusID PCI:1:0:0 to both of Device sections in your
config file. If it still doesn't work, post your log file.
I've got the bus id as noted below, yet I get the same thing, mirrored
images on both monitors.
Radeon VE here.
Michel
Are there any plans to add it in the future? I might take a look at it
if I could ever get time away from coding for work (gooo startup!).
Where?--I assume you are talking about where did I see a working
config... well... right here on the list. Was it working or not... I
guess not. It
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf
Of Wayne Schroeder
Sent: Friday, July 05, 2002 9:52 AM
To: [EMAIL PROTECTED]
Subject: Re: [Xpert]Dual head with ati mobility (lcd + external) (one
pciid, 2 outputs)
Are there any plans to add it in the future
Joe Krahn wrote:
Geoffrey wrote:
My assumption is that this patch deals with the fact the oem card has
two digital outputs? At least that's what I understand, mine has one
vga and one digital. I don't think this should matter though. I've got
a converter on my digital and before starting X,
As far as getting the retail version working - I've
had the dual-output retail VE working in dualhead
forever (well, since before 4.2.0 anyway - I was using
a rather late CVS). You just need to specify two
device sections for the same card, but one needs
(IIRC, my dualhead box is a few thousand
Eric Sprague wrote:
As far as getting the retail version working - I've
had the dual-output retail VE working in dualhead
forever (well, since before 4.2.0 anyway - I was using
a rather late CVS). You just need to specify two
device sections for the same card, but one needs
(IIRC, my
If I can get it, I'll send it to ya - but I'm
currently on a ship in the middle of BFE, and my box
is in the USA, so it'll be a very long time. If anyone
else has the VE working in dualhead, could they please
post their XF86Config-4?
--- Geoffrey [EMAIL PROTECTED] wrote:
Eric Sprague wrote:
Geoffrey wrote:
I've got a 'Screen 0' in my first Device section and 'Screen 1' in the
second.
The examples I used were for single card with dual outputs. One for a
Matrox card that had two vga outputs (linux journal article) and another
was an example config file from someone who has a
Joe Krahn wrote:
Geoffrey wrote:
I've got a 'Screen 0' in my first Device section and 'Screen 1' in the
second.
The examples I used were for single card with dual outputs. One for a
Matrox card that had two vga outputs (linux journal article) and another
was an example config file from
I've been trying to get dual head working on my retail Radeon VE. I've
toggled between Xfree 4.2 and the Gatos stuff. I know some folks have
this working, both retail and oem cards.
I keep getting the message:
Please use only one Device/Screen section in your XFConfig file
Which doesn't
Hi,
I'd like to use the SMI Lynx driver in Dual-head LCD mode.
All the information I have says that the Linux Dual-head support doesn't
exist for the Lynx chipsets.
Would anyone happen to be working on support for this? If not, could anyone
suggest helpful resources, since we've never
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Card: Matrox G400 Dualhead
X version: 4.1.0.1
Distro: Debian, sid (unstable)
Attempt:To get dual head working, using mgapdesk, using xinerama.
Problem:kicker (the panel) crashes
Hi, I was hoping someone might be able to assist me with this problem.
Originally I had a dual head setup with my GeForce2 Pro and a Matrox
Millenium card. Unfortunately there is an issue with GLX so I couldn't run
anything accelerated.
So I purchased an Nvidia TNT2 PCI card to complement my
Dear Xperts.
Since I got my dual-boot RH7.2/Win98 laptop, it's been bugging me that
windows does a nice xinerama-like two-screen virtual desktop, while linux
and XFree86 4.1 doesn't...
Since linux is really my preferred OS, I'd be really happy if somebody
would tell me if xinerama for the
Nope. The support for this hasn't been written.
It's on my to-do list, but fairly low priority.
Alan.
On Wed, Apr 24, 2002 at 08:57:00AM +0200, Paul Matthias Diderichsen wrote:
Dear Xperts.
Since I got my dual-boot RH7.2/Win98 laptop, it's been bugging me that
windows does a nice
Hello all,
I have bought a toshiba Satellite 3000 X11 laptop with an intel i830MG
graphic board. With Windows XP, I can use this computer in a dual-head
configuration: the laptop screen and an external screen on the vga port
can display different pictures. I would like to do the same thing with
Google has failed me on this one, so I'm turning to you all:
(Please cc: me all replies, as I am not subscribed to this list.)
I have a Toshiba Satellite 2800-C302 with an S3 Savage IX-MV video
card, which supports dual-head displays. This works 100% under Windows,
so I
On Tue, 26 Feb 2002, Matthew Smith wrote:
I am designing an information system which presently has two networked
PCs in a box, one driving a touch screen and the other displaying
(different) information through a window.
The human/machine interface is Mozilla running straight on top of
Hi
I am designing an information system which presently has two networked
PCs in a box, one driving a touch screen and the other displaying
(different) information through a window.
The human/machine interface is Mozilla running straight on top of
XFree86, without any window manager - only
On Die, 2002-02-05 at 20:12, Tim Schröder wrote:
i im wondering if theres DH-Support for Radeon Cards. Esp. for my new 7500...
In 4.2.0, yes.
Can someone tell me what I need to do to get it working. Or give me a
hint how to extend it, to get it working.
You set it up like any other single
Hi there,
i im wondering if theres DH-Support for Radeon
Cards. Esp. for my new 7500...
While I was scanning through the drivers to see how
they and X11 work if found notes about that in the radeon_probe( i think it was)
source. Also mentioned is that this resource is marked as somewhat
On Fri, 14 Sep 2001, Mark Vojkovich wrote:
On Fri, 14 Sep 2001, C. Scott Ananian wrote:
Please find attached a first-draft of Xinerama support for TwinView.
The parameters are hacked for my particular setup at the moment. I will
finish this on Monday. It won't be hard. The whole
On Tue, 25 Sep 2001, C. Scott Ananian wrote:
On Fri, 14 Sep 2001, Mark Vojkovich wrote:
On Fri, 14 Sep 2001, C. Scott Ananian wrote:
Please find attached a first-draft of Xinerama support for TwinView.
The parameters are hacked for my particular setup at the moment. I will
On Fri, 14 Sep 2001, C. Scott Ananian wrote:
On Thu, 13 Sep 2001, Mark Vojkovich wrote:
On Thu, 13 Sep 2001, C. Scott Ananian wrote:
See
http://cvs.sourceforge.net/cgi-bin/viewcvs.cgi/xinerama/xinerama/xc/doc/XineramaSpec.txt?rev=1.1content-type=text/vnd.viewcvs-markup
The
On Thu, 13 Sep 2001, Mark Vojkovich wrote:
p.s. if the 'nvidia' driver were open source, i could do this myself.
I doubt that.
Mark.
Please find attached a first-draft of Xinerama support for TwinView.
The parameters are hacked for my particular setup at the
On Thu, 13 Sep 2001, Mark Vojkovich wrote:
On Thu, 13 Sep 2001, C. Scott Ananian wrote:
I have a multi-head GeForce2 MX card with two VGA outputs.
[...]
The nv driver that comes with XFree86 does not support the
second output on the GeForce2 MX.
The driver documentation should
On Thu, 13 Sep 2001, Mark Vojkovich wrote:
Only the nvidia driver for
Linux available from NVIDIA's web site can use the second output.
Why is it that this is not supported? Is it something I could fix w/ a
little hacking?
If it could be fixed with a little hacking it would
72 matches
Mail list logo
