Hi Mike,

Got that part. The OP "said but am not sure how to configure sipx to authenticate once based on IP over a user name/password". What does this mean in a signalling standpoint?

Joegen

On 12/30/2011 10:32 PM, Michael Picher wrote:
Joegen,

I think the dropped calls was a reference to a totally different problem... No Jira has been provided or any other information on the problem just a vague reference to a problem the person had 2 years ago.

Mike

On Fri, Dec 30, 2011 at 8:59 AM, Joegen Baclor <jbac...@ezuce.com <mailto:jbac...@ezuce.com>> wrote:

    I won't touch the subject of VPRI because it is not relevant to the
    actual issue.  All there is to it are INVITES and REGISTERS that are
    either authenticated via user name or password or via an ACL which we
    here call IP Auth.  What receives them on the other end can have any
    name it wants.  What is not clear to me and I am honestly confused
    what
    you mean by "authenticate once based on IP over a user name/password".
    Would you mind giving a call flow to enlighten me?


    On 12/30/2011 06:10 AM, m...@grounded.net
    <mailto:m...@grounded.net> wrote:
    > I need to install 4 separate sipx systems in four separate
    locations. No interoffice communications.
    > All of the sipx systems could benefit from the use of a VPRI
    rather than traditional.
    >
    > I use ITSP's for individual lines when we need an area code that
    our local telco cannot handle.
    > On sipx, I usually just  create an ITSP device in the gateway
    section and let it authenticate via user name/password.
    >
    > In this case, due to the number of lines per server (4 to 8), it
    doesn't seem like a good idea to authenticate each and every DID
    individually for example and would prefer using an IP based
    authentication for the whole server.
    >
    > I'll be using flowroute for the systems but am not sure how to
    configure sipx to authenticate once based on IP over a user
    name/password. I don't see anything which would allow me to do
    this in the Gateway configuration section.
    >
    > Can someone shed some light on this please.
    >
    > Thanks very much.
    >
    > Mike
    >
    > _______________________________________________
    > sipx-users mailing list
    > sipx-users@list.sipfoundry.org
    <mailto:sipx-users@list.sipfoundry.org>
    > List Archive: http://list.sipfoundry.org/archive/sipx-users/
    >

    _______________________________________________
    sipx-users mailing list
    sipx-users@list.sipfoundry.org <mailto:sipx-users@list.sipfoundry.org>
    List Archive: http://list.sipfoundry.org/archive/sipx-users/




--
Michael Picher, Director of Technical Services
eZuce, Inc.

300 Brickstone Square

Suite 201

Andover, MA. 01810

O.978-296-1005 X2015
M.207-956-0262
@mpicher <http://twitter.com/mpicher>
www.ezuce.com <http://www.ezuce.com>



_______________________________________________
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/

_______________________________________________
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/

Reply via email to