Monitored isn't the big question, but a listed (or Approved) control valve - monitored- is what would be required.
Don't forget to add the drain on both sides or you'll be kicking yourself when you realize it about halfway thru the fill.... like adding an ITC after each sectional flow switch- gotta be a way to test it. glc -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Charles Thurston Sent: Wednesday, May 21, 2008 11:28 AM To: RFI - Bismarck Subject: Re: Sectional Valves... Hello RFI, Potter makes a switch that can be added to ball valves for this RBVS, BUT since it clamps to the pipe for mounting it might not be suitable for use with CPVC. Wednesday, May 21, 2008, 10:40:09 AM, you wrote: > > I think I asked this already. and apologize for regurgitating it! I have a > bldg. that is 'U-shaped' in nature. The system is of CPVC in nature - > fairly small. Prior to going into the 'legs' of the 'U' - the contractor > wants to have (2) ball valves installed to isolate each wing for maintenance > purposes. Do these ball valves need to be of a 'monitored' (wired to panel) > type or can they be just run-of-the-mill ball valves? > > Imho - I believe they should be 'monitored' valves. Thanks! > > R.F.P. Chuck > > No virus found in this outgoing message. > Checked by AVG. > Version: 7.5.524 / Virus Database: 269.23.21/1458 - Release Date: 5/21/2008 > 7:21 AM > > -- Best regards, Charles Thurston mailto:[EMAIL PROTECTED] Coastal Fire Protection _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
