Hello Thom, I also use them on valves in Air lines from a tank compressor to the AMD for multiple risers. Nice to use them on the Alarm Cutoff valves on wet risers with water motor gongs also when monitored by a pressure switch.
Thursday, May 22, 2008, 6:51:36 PM, you wrote: > We use quite a few of them on our 13D backflows which all seem to come with > ball valves. > We've also installed them at the owner request on the drum drip ball valves > of dry systems. You need a slow close control valve for a sectional valve, > to prevent water hammer, so these won't work, since 1/4 turn ball valves are > anything but "Slow Close" > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Tom Duross > Sent: Wednesday, May 21, 2008 4:35 PM > To: [email protected] > Subject: RE: Sectional Valves... > Actually Charles, it clamps to the valve body. Meant for a ball valve only, > like when you have a listed bfp assembly with ball valves and they have to > be monitored. > Not cheap! They list for $225. > Tom > Go Red Sox! > Hello RFI, > Potter makes a switch that can be added to ball valves for this RBVS, BUT > since it clamps to the pipe for mounting it might not be suitable for use > with CPVC. > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > To Unsubscribe, send an email to:[EMAIL PROTECTED] > (Put the word unsubscribe in the subject field) > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > To Unsubscribe, send an email to:[EMAIL PROTECTED] > (Put the word unsubscribe in the subject field) -- Best regards, Charles Thurston mailto:[EMAIL PROTECTED] Coastal Fire Protection _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
