This is a non-powered roller conveyor, mattresses are moved by hand, not a powered belt conveyor right?
Craig L. Prahl, CET Fire Protection Specialist Mechanical Department CH2MHILL Lockwood Greene 1500 International Drive PO Box 491, Spartanburg, SC 29304-0491 Direct - 864.599.4102 Fax - 864.599.8439 [email protected] http://www.ch2m.com -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Mike Hairfield Sent: Wednesday, July 01, 2009 11:33 AM To: AFSA SprinklerFORUM Subject: Conveyors Here is my situation: Conveyors used to move mattresses around the building which has an ESFR sprinkler system, they are 7'-3" wide and 2'-10" above finished floor. The conveyors have 2 1/2" rollers and there is a gap of 3 1/2" between the rollers, my call is that additional ESFR's are not required there is more open space than in most rack systems. What is the opinion of the Forum? Mike Hairfield _______________________________________________ Sprinklerforum mailing list http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
