All are Non-Powered
Mike Hairfield > From: [email protected] > To: [email protected] > Date: Wed, 1 Jul 2009 09:37:44 -0600 > Subject: RE: Conveyors > > This is a non-powered roller conveyor, mattresses are moved by hand, not a > powered belt conveyor right? > > > > > Craig L. Prahl, CET > Fire Protection Specialist > Mechanical Department > CH2MHILL > Lockwood Greene > 1500 International Drive > PO Box 491, Spartanburg, SC 29304-0491 > Direct - 864.599.4102 > Fax - 864.599.8439 > [email protected] > http://www.ch2m.com > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Mike Hairfield > Sent: Wednesday, July 01, 2009 11:33 AM > To: AFSA SprinklerFORUM > Subject: Conveyors > > > Here is my situation: > > > > Conveyors used to move mattresses around the building which has an ESFR > sprinkler system, they > > are 7'-3" wide and 2'-10" above finished floor. > > > > The conveyors have 2 1/2" rollers and there is a gap of 3 1/2" between the > rollers, > > my call is that additional ESFR's are not required there is more open space > than in > > most rack systems. > > > > What is the opinion of the Forum? > > > > Mike Hairfield > > _______________________________________________ > Sprinklerforum mailing list > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > For Technical Assistance, send an email to: [email protected] > > To Unsubscribe, send an email to:[email protected] > (Put the word unsubscribe in the subject field) > _______________________________________________ > Sprinklerforum mailing list > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > For Technical Assistance, send an email to: [email protected] > > To Unsubscribe, send an email to:[email protected] > (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
