Luckily not an FM project. Brian Harris, CET BVS Systems Inc. bvssytemsinc.com<http://bvssystemsinc.com/>
From: Sprinklerforum [mailto:[email protected]] On Behalf Of Travis Mack Sent: Thursday, June 01, 2017 9:59 AM To: [email protected] Subject: Re: Review Comments Yes. That comes straight from FM. If you have an FM job, you will be held to that requirement. Travis Mack, SET MFP Design, LLC "Follow" us on Facebook: https://www.facebook.com/pages/MFP-Design-LLC/92218417692 Send large files to MFP Design via: https://www.hightail.com/u/MFPDesign Sent from my iPhone On Jun 1, 2017, at 6:31 AM, Damien Shannon <[email protected]<mailto:[email protected]>> wrote: That is a requirement in FM Datasheet 2-0. Is it an FM project? Was it specified in project specs? Can you use seamless pipe to bypass the issue? Damien Shannon. From: Sprinklerforum [mailto:[email protected]] On Behalf Of Brian Harris Sent: 01 June 2017 06:59 To: [email protected]<mailto:[email protected]> Subject: Review Comments Just got back some review comments for a project we’re doing and one in particular stuck out; “Orient longitudinal pipe weld seam toward building roof; at least 45 degrees in relationship to the floor (for reference, the weld line points to the floor at 0 degrees) to mitigate pipe weld seam corrosion.” Could you imagine the headache that would cause at the fab shop? Brian Harris, CET BVS Systems Inc. Design Manager bvssystemsinc.com<http://bvssystemsinc.com/> Phone: 704.896.9989 Fax: 704.896.1935 _______________________________________________ Sprinklerforum mailing list [email protected]<mailto:[email protected]> http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
_______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
