It extends to 25 IF we step outside of it. Write up not protected, fire starts, 
someone dies because original calculations were way off.
Since you  started evaluating it at an engineering level, then it will be 
extended that you neglected to report the inadequate design.

IF we stay within 25, we are NOT there to inspect Engineering determinations. 
We are only there to evaluate the two things previously mentioned.

How can you be held liable for sticking to doing the job you were hired to do? 
What would be the basis of it?

R/
Matt





Matthew J. Willis, C.E.T.

Ferguson Fire Design, LLC

D: (602) 337-0721<(602)%20337-0721> C: (307) 236-8249<(307)%20236-8249>

[email protected]<mailto:[email protected]>



________________________________
From: Fpdcdesign <[email protected]>
Sent: Monday, December 23, 2024 10:30 AM
To: Discussion list on issues relating to automatic fire sprinklers 
<[email protected]>
Subject: [Sprinklerforum] Re: Unprotected areas

Caution:  This email originated from outside of the organization.  DO NOT click 
links or open attachments unless you recognize and trust the sender.
________________________________
David, all very true. But we can also be sued in civil court for not reporting 
an unsafe condition which results in a loss (liability). My question is does 
this also extend to someone doing a 25 inspection? If they notice an unsafe 
condition and do not report it, even though it is not part of their inspection, 
could they still be held liable in the event of a loss? The answer is not going 
to come from 25 or State Code, but actual experience.

Todd G Williams, PE
Fire Protection Design/Consulting
Stonington, CT
860-535-2080<tel:860-535-2080> (ofc)
860-554-7054<tel:860-554-7054>  (fax)
860-608-4559<tel:860-608-4559> (cell)


On Dec 23, 2024 at 10:11 AM, <David 
Williams<mailto:[email protected]>> wrote:


If you hold a PE/FPE license, you are likely to be required to report unsafe 
conditions as part of your license as protecting the public is part and parcel 
of such a license to prevent getting pulled up in front of the licensing board 
for an ethics violation.



[Icon    Description automatically generated]



DAVID WILLIAMS, PE, FPE

Senior Mechanical / Fire Protection Engineer



LHBcorp.com<https://www.lhbcorp.com/> |  PERFORMANCE DRIVEN DESIGN

See LHBcorp.com for states of licensure.







From: John Denhardt <[email protected]>
Date: Sunday, December 22, 2024 at 8:51 PM
To: Discussion list on issues relating to automatic fire sprinklers 
<[email protected]>
Subject: [Sprinklerforum] Re: Unprotected areas

If you are performing a NFPA 25 inspection, stay in you lane. Only do what the 
standard states and your contract requires.



Thanks,

John



John August Denhardt, P.E


Vice President Engineering and Technical Services

American Fire Sprinkler Association

301-343-1457



Are you a member with a technical question?

Don't forget one of the most valuable resources that AFSA provides is Technical 
Reviews by our Technical Services Department. It’s like having an FPE on your 
staff. Visit 
www.firesprinkler.org/technicalreview<https://www.firesprinkler.org/technicalreview>
 to submit a question today! (Member login required.)

On Dec 22, 2024, at 20:40, Dominick Kasmauskas <[email protected]> 
wrote:



You don't often get email from [email protected]. Learn why this is 
important<https://aka.ms/LearnAboutSenderIdentification>

https://caselaw.findlaw.com/court/nj-supreme-court/1677993.html<https://caselaw.findlaw.com/court/nj-supreme-court/1677993.html>



“Stay in your lane.” IMHO.


Dominick Kasmauskas
Legislative Consultant
American Fire Sprinkler Association (AFSA)
518.937.4790
Kingsport, TN
www.FireSprinkler.org<http://www.FireSprinkler.org>





On Sun, Dec 22, 2024 at 20:34 Fpdcdesign 
<[email protected]<mailto:[email protected]>> wrote:

So what is worse, liability for operating outside a standard or the liability 
for not reporting a dangerous even if it is outside of that standard?



Todd Williams

Fire Protection Design/Consulting

Stonington, CT

860-608-4559




On Dec 22, 2024 at 8:19 PM, <Matthew 
Willis1<mailto:[email protected]>> wrote:

That is why we operate as Technicians, with predescribed action all written out 
for us.



Diligence dictates we cry foul for sure. Just note as an observation. The NFPA 
25 report is not the plcae for it.



Now, this is a bit different in LA. One of the states I worked in as an NFPA 25 
inspector. LA is a life safety state. So, we are Life Safety Inspectors. There 
are clear Negligence, and Gross Negligence requirements in obtaining the State 
License.



But in the end, operating outside of the adopted, predescribed standard, is a 
dangerous liability walk I do not care to take.



R/

Matt





Matthew J. Willis, C.E.T.

Ferguson Fire Design, LLC

D: [http://(602)%20337-0721](602) 337-0721 C: [http://(307)%20236-8249](307) 
236-8249

[email protected]<mailto:[email protected]>





________________________________

From: Fpdcdesign <[email protected]<mailto:[email protected]>>
Sent: Sunday, December 22, 2024 8:14 PM
To: Discussion list on issues relating to automatic fire sprinklers 
<[email protected]<mailto:[email protected]>>
Subject: [Sprinklerforum] Re: Unprotected areas



Caution:  This email originated from outside of the organization.  DO NOT click 
links or open attachments unless you recognize and trust the sender.



________________________________

I understand the requirements and limitations of 25. But let me ask this. If 
the inspector notices and obvious problem that is outside of 25 and does not 
report it. If a fire occurs that is caused or exacerbated by the problem that 
he noticed but did not report, what liability does he have.



As a PE, if I notice a dangerous condition and do not reported, I can be held 
liable.



Todd Williams

Fire Protection Design/Consulting

Stonington, CT

860-608-4559



On Dec 22, 2024 at 7:57 PM, <Matthew 
Willis1<mailto:[email protected]>> wrote:

Guys, this is a losing battle with Mike. He vents about how crappy our jobs are 
on other social media.



It's a shame, I used to like corresponding with him.



Mike, since our industry is so bad, and you are clearly making bank with your 
current position, might I suggest:









https://www.petforums.co.uk/forums/dog-walking.85/<https://www.petforums.co.uk/forums/dog-walking.85/>

[https://images.platforum.cloud/logos/petforums_co_uk_profile.png]<https://www.petforums.co.uk/forums/dog-walking.85/>

Dog Walking - UK Pet Forums 
Forum<https://www.petforums.co.uk/forums/dog-walking.85/>

Discuss everything regarding dog walking, from places to walk your dog, to help 
and advice in starting your own dog walking business.

www.petforums.co.uk<http://www.petforums.co.uk>





R/

Matt





Matthew J. Willis, C.E.T.

Ferguson Fire Design, LLC

D: [(602)%20337-0721](602) 337-0721 C: [(307)%20236-8249](307) 236-8249

[email protected]<mailto:[email protected]>





________________________________

From: Bob Caputo <[email protected]<mailto:[email protected]>>
Sent: Friday, December 20, 2024 2:41 PM
To: Discussion list on issues relating to automatic fire sprinklers 
<[email protected]<mailto:[email protected]>>
Subject: [Sprinklerforum] Re: Unprotected areas



Caution:  This email originated from outside of the organization.  DO NOT click 
links or open attachments unless you recognize and trust the sender.



________________________________

Read section 1.1.3 of NFPA 25.  You’re inspecting what is there for wear and 
tear purposes. You are not verifying the design or installation of any system



[https://www.dropbox.com/s/g4h8r7hdtsr6154/AFSA_L.png?raw=1]

Bob Caputo, CFPS

President

American Fire Sprinkler Association

p:

214-349-5965 ext124

w:

firesprinkler.org<http://firesprinkler.org>

[http://cdn2.hubspot.net/hubfs/184235/dev_images/signature_app/facebook_sig.png]<https://www.facebook.com/firesprinkler.org>
  
[http://cdn2.hubspot.net/hubfs/184235/dev_images/signature_app/twitter_sig.png] 
<https://twitter.com/afsa/status/1039528345367732224>   
[http://cdn2.hubspot.net/hubfs/184235/dev_images/signature_app/linkedin_sig.png]
 <https://www.linkedin.com/company/american-fire-sprinkler-association-afsa->   
[http://cdn2.hubspot.net/hubfs/184235/dev_images/signature_app/instagram_sig.png]
 <https://www.instagram.com/firesprinklerorg>

Train a safer, more efficient workforce.

By enrolling your employees in the AFSA Apprenticeship Training Series for 
Sprinkler 
Fitters<https://www.firesprinkler.org/WWW/Education/Apprentice_Training/WWW/Education/Apprenticeship_Training.aspx?hkey=e88ef09e-d74c-407f-abcd-995aff866149>,
 you will reap the benefits of a qualified, professional installation crew. 
Well-trained employees will work smarter, increasing your company's 
productivity and, in turn, its profits. Learn 
more<https://www.firesprinkler.org/WWW/Education/Apprentice_Training/WWW/Education/Apprenticeship_Training.aspx?hkey=e88ef09e-d74c-407f-abcd-995aff866149>.





On Fri, Dec 20, 2024 at 10:35 AM Brandon Bridgford 
<[email protected]<mailto:[email protected]>> wrote:

How do you approach unprotected areas in regards to ITM and NFPA 25. I know 
there was a discussion in the past regarding inspecting a system as is, rather 
than writing up deficiencies that have to do with system design. I have been 
told that this can open up more liability if you are not inspecting all design 
elements (i.e. density, hazard levels, etc.)



Thank you!

Brandon







_________________________________________________________
SprinklerForum mailing list:
https://lists.firesprinkler.org/list/sprinklerforum.lists.firesprinkler.org<https://lists.firesprinkler.org/list/sprinklerforum.lists.firesprinkler.org>
To unsubscribe send an email to 
[email protected]<mailto:[email protected]>

_________________________________________________________ SprinklerForum 
mailing list: 
https://lists.firesprinkler.org/list/sprinklerforum.lists.firesprinkler.org<https://lists.firesprinkler.org/list/sprinklerforum.lists.firesprinkler.org>
 To unsubscribe send an email to 
[email protected]<mailto:[email protected]>

_________________________________________________________ SprinklerForum 
mailing list: 
https://lists.firesprinkler.org/list/sprinklerforum.lists.firesprinkler.org<https://lists.firesprinkler.org/list/sprinklerforum.lists.firesprinkler.org>
 To unsubscribe send an email to 
[email protected]<mailto:[email protected]>

_________________________________________________________
SprinklerForum mailing list:
https://lists.firesprinkler.org/list/sprinklerforum.lists.firesprinkler.org<https://lists.firesprinkler.org/list/sprinklerforum.lists.firesprinkler.org>
To unsubscribe send an email to 
[email protected]<mailto:[email protected]>

_________________________________________________________
SprinklerForum mailing list:
https://lists.firesprinkler.org/list/sprinklerforum.lists.firesprinkler.org<https://lists.firesprinkler.org/list/sprinklerforum.lists.firesprinkler.org>
To unsubscribe send an email to [email protected]

_________________________________________________________ SprinklerForum 
mailing list: 
https://lists.firesprinkler.org/list/sprinklerforum.lists.firesprinkler.org<https://lists.firesprinkler.org/list/sprinklerforum.lists.firesprinkler.org>
 To unsubscribe send an email to [email protected]
_________________________________________________________
SprinklerForum mailing list:
https://lists.firesprinkler.org/list/sprinklerforum.lists.firesprinkler.org
To unsubscribe send an email to [email protected]

Reply via email to