paul- wrote:
> Its up to LMS to remember the playback mode....nothing I can do about
> that from the bluetooth side. Once the player connects, take a look a
> the lms interface and see what is in the playback queue.
>
> As for the logs, that all looks normal, you will notice in the second
> log that you are pressing the play/pause button on the speaker. Again,
> that all looks normal.
Thanks for all the advice, Paul. Sometimes I want to hear my hair out!
Today I powered up the Pi with a keyboard and monitor, to have a little
look at what lies inside piCore.
LMS was sending random tracks to the headphone socket, the only player
it had, as instructed in the tweak "Auto start LMS"
Later I turned on the speaker - instant pairing (Argh - tears hair!),
but no sound as LMS had nothing in its list for player SR06151. Log
below if it's not too long (or in the next post if it is) which I expect
will show everything normal.
Is there a way for me to send LMS a command "randomplay tracks on
SR06151", MAC:E0:B7:C5:5B:7C:90, with no network connection being
available? Either after pairing, or after a time delay long enough to
allow pairing to happen if it's going to?
[My goal is a stand-alone setup, in a place with no wifi, with the users
doing no more than plugging in the boxes.]
I should need a tweak like that only once - my final setup can just live
without updates for as long as it keeps on working.
And my fallback remains a cable from the headphone socket to the
speaker, just in case...
Code:
--------------------
pCP Bluetooth extension build:0021
Starting BT Controller
bcm43xx_init
Flash firmware /lib/firmware/brcm/BCM4345C0.hcd
Set BDADDR UART: b8:27:eb:f1:8a:27
Set Controller UART speed to 3000000 bit/s
Device setup complete
Raspberry Pi BDADDR already set
Waiting for bluetooth controller.Ready
RPi Bluetooth Hardware Address: B8:27:EB:F1:8A:27
Starting pCP BT Agent
Starting Bluealsa
Bluealsa is running. PID=6788
BT Controller Ready
11-04 12:59 NZDT INFO ------------Starting pCP BT Speaker Daemon
v8.1.0.004------------
11-04 12:59 NZDT INFO Resetting asound.conf.
11-04 12:59 NZDT INFO Removing bt_ from asound.conf
11-04 12:59 NZDT INFO Current contents of /usr/local/etc/pcp/pcp-bt.conf.
11-04 12:59 NZDT INFO E0:B7:C5:5B:7C:90#SRO6151#10000#1
11-04 12:59 NZDT DEBUG PCM Devices found dbus.Dictionary({},
signature=dbus.Signature('oa{sv}'))
11-04 12:59 NZDT INFO Starting connection signal handlers.
11-04 13:13 NZDT INFO ---- Caught Connect signal ----
11-04 13:13 NZDT DEBUG /org/bluealsa/hci0/dev_E0_B7_C5_5B_7C_90/rfcomm
11-04 13:13 NZDT DEBUG HCI:hci0
11-04 13:13 NZDT INFO MAC:E0:B7:C5:5B:7C:90
11-04 13:13 NZDT INFO TRANSPORT:rfcomm
11-04 13:13 NZDT INFO Starting a2dp background monitor.
11-04 13:13 NZDT INFO ---- Caught Connect signal ----
11-04 13:13 NZDT DEBUG /org/bluealsa/hci0/dev_E0_B7_C5_5B_7C_90/hfpag/sink
11-04 13:13 NZDT DEBUG HCI:hci0
11-04 13:13 NZDT INFO MAC:E0:B7:C5:5B:7C:90
11-04 13:13 NZDT INFO TRANSPORT:hfpag
11-04 13:13 NZDT INFO ---- Caught Connect signal ----
11-04 13:13 NZDT DEBUG
/org/bluealsa/hci0/dev_E0_B7_C5_5B_7C_90/hfpag/source
11-04 13:13 NZDT DEBUG HCI:hci0
11-04 13:13 NZDT INFO MAC:E0:B7:C5:5B:7C:90
11-04 13:13 NZDT INFO TRANSPORT:hfpag
11-04 13:13 NZDT INFO ---- Caught Connect signal ----
11-04 13:13 NZDT DEBUG /org/bluez/hci0/dev_E0_B7_C5_5B_7C_90/sep1
11-04 13:13 NZDT DEBUG HCI:hci0
11-04 13:13 NZDT INFO MAC:E0:B7:C5:5B:7C:90
11-04 13:13 NZDT INFO TRANSPORT:sep1
11-04 13:13 NZDT INFO ---- Caught Connect signal ----
11-04 13:13 NZDT DEBUG /org/bluez/hci0/dev_E0_B7_C5_5B_7C_90/sep2
11-04 13:13 NZDT DEBUG HCI:hci0
11-04 13:13 NZDT INFO MAC:E0:B7:C5:5B:7C:90
11-04 13:13 NZDT INFO TRANSPORT:sep2
11-04 13:13 NZDT INFO ---- Caught Connect signal ----
11-04 13:13 NZDT DEBUG /org/bluez/hci0/dev_E0_B7_C5_5B_7C_90/sep1/fd0
11-04 13:13 NZDT DEBUG HCI:hci0
11-04 13:13 NZDT INFO MAC:E0:B7:C5:5B:7C:90
11-04 13:13 NZDT INFO TRANSPORT:sep1
11-04 13:13 NZDT INFO ---- Caught Connect signal ----
11-04 13:13 NZDT DEBUG
/org/bluealsa/hci0/dev_E0_B7_C5_5B_7C_90/a2dpsrc/sink
11-04 13:13 NZDT DEBUG HCI:hci0
11-04 13:13 NZDT INFO MAC:E0:B7:C5:5B:7C:90
11-04 13:13 NZDT INFO TRANSPORT:a2dpsrc
11-04 13:13 NZDT INFO Connected SRO6151
11-04 13:13 NZDT INFO Supported Codecs: SBC
11-04 13:13 NZDT INFO Current Codec: SBC
11-04 13:13 NZDT DEBUG LMS server IP:""
11-04 13:13 NZDT DEBUG pCP Card Conf:"Headphones.conf"
11-04 13:13 NZDT INFO Starting squeezelite with output device:
bt_SRO6151
11-04 13:13 NZDT INFO Device: dev_E0_B7_C5_5B_7C_90, connected
normally. Monitor exiting.
11-04 13:13 NZDT INFO Checking for squeezelite pid:9200
11-04 13:13 NZDT INFO Player Connected to LMS at: 192.168.1.26:9000
11-04 13:13 NZDT INFO Sending Play command for SRO6151 to LMS at
192.168.1.26
11-04 13:13 NZDT DEBUG Command returned: {}
11-04 13:13 NZDT DEBUG Open /dev/input/event8 for E0_B7_C5_5B_7C_90
11-04 13:13 NZDT INFO ---- Caught Connect signal ----
11-04 13:13 NZDT DEBUG /org/bluez/hci0/battery/dev_E0_B7_C5_5B_7C_90
11-04 13:13 NZDT DEBUG HCI:hci0
11-04 13:13 NZDT INFO MAC:
11-04 13:13 NZDT INFO TRANSPORT:dev_E0_B7_C5_5B_7C_90
11-04 13:13 NZDT INFO Starting a2dp background monitor.
11-04 13:13 NZDT DEBUG PCM Devices found
dbus.Dictionary({dbus.ObjectPath('/org/bluealsa/hci0/dev_E0_B7_C5_5B_7C_90/hfpag/sink'):
dbus.Dictionary({dbus.String('Device'):
dbus.ObjectPath('/org/bluez/hci0/dev_E0_B7_C5_5B_7C_90', variant_level=1),
dbus.String('Sequence'): dbus.UInt32(0, variant_level=1),
dbus.String('Transport'): dbus.String('HFP-AG', variant_level=1),
dbus.String('Mode'): dbus.String('sink', variant_level=1),
dbus.String('Format'): dbus.UInt16(33296, variant_level=1),
dbus.String('Channels'): dbus.Byte(1, variant_level=1),
dbus.String('Sampling'): dbus.UInt32(8000, variant_level=1),
dbus.String('Codec'): dbus.String('CVSD', variant_level=1),
dbus.String('Delay'): dbus.UInt16(10, variant_level=1),
dbus.String('SoftVolume'): dbus.Boolean(False, variant_level=1),
dbus.String('Volume'): dbus.UInt16(3840, variant_level=1)},
signature=dbus.Signature('sv')),
dbus.ObjectPath('/org/bluealsa/hci0/dev_E0_B7_C5_5B_7C_90/hfpag/source'):
dbus.Dictionary({dbus.String('De
vice'): dbus.ObjectPath('/org/bluez/hci0/dev_E0_B7_C5_5B_7C_90',
variant_level=1), dbus.String('Sequence'): dbus.UInt32(0, variant_level=1),
dbus.String('Transport'): dbus.String('HFP-AG', variant_level=1),
dbus.String('Mode'): dbus.String('source', variant_level=1),
dbus.String('Format'): dbus.UInt16(33296, variant_level=1),
dbus.String('Channels'): dbus.Byte(1, variant_level=1),
dbus.String('Sampling'): dbus.UInt32(8000, variant_level=1),
dbus.String('Codec'): dbus.String('CVSD', variant_level=1),
dbus.String('Delay'): dbus.UInt16(10, variant_level=1),
dbus.String('SoftVolume'): dbus.Boolean(False, variant_level=1),
dbus.String('Volume'): dbus.UInt16(3840, variant_level=1)},
signature=dbus.Signature('sv')),
dbus.ObjectPath('/org/bluealsa/hci0/dev_E0_B7_C5_5B_7C_90/a2dpsrc/sink'):
dbus.Dictionary({dbus.String('Device'):
dbus.ObjectPath('/org/bluez/hci0/dev_E0_B7_C5_5B_7C_90', variant_level=1),
dbus.String('Sequence'): dbus.UInt32(0, variant_level=1),
dbus.String('Transport'
): dbus.String('A2DP-source', variant_level=1), dbus.String(!
'Mode'): dbus.String('sink', variant_level=1), dbus.String('Format'):
dbus.UInt16(33296, variant_level=1), dbus.String('Channels'): dbus.Byte(2,
variant_level=1), dbus.String('Sampling'): dbus.UInt32(48000, variant_level=1),
dbus.String('Codec'): dbus.String('SBC', variant_level=1),
dbus.String('Delay'): dbus.UInt16(152, variant_level=1),
dbus.String('SoftVolume'): dbus.Boolean(False, variant_level=1),
dbus.String('Volume'): dbus.UInt16(32639, variant_level=1)},
signature=dbus.Signature('sv'))}, signature=dbus.Signature('oa{sv}'))
11-04 13:13 NZDT INFO Device: dev_, connected with a2dp
--------------------
Digital: Raspberry Pi 3B; piCorePlayer 8 + LMS 8; HifiBerry DAC+DSP >
Yamaha RX-V2700 > Jamo speakers
Analogue: HifiBerry DAC+DSP > Speakercraft MZC-66 > whole house
Library: External USB drive
Android: Squeezer app
------------------------------------------------------------------------
Viragored's Profile: http://forums.slimdevices.com/member.php?userid=32954
View this thread: http://forums.slimdevices.com/showthread.php?t=114834
_______________________________________________
unix mailing list
unix@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/unix
