I don't think so. The quality can be anything from 0 to 1 but it is likely to
be very wet. There is no diagram that can tell you the quality as is insinuated
in the Nasa article. Chimney overflowing with what?
----- Original Message -----
From: Alan J Fletcher
To: [email protected]
Sent: Wednesday, August 17, 2011 8:04 PM
Subject: Re: [Vo]:Answering Krivit #3: eCat steam quality must be above 75%
(above 4300 Watts)
At 04:11 PM 8/17/2011, Joe Catania wrote:
The NASA calculations seem to have no validity. It dosen't seem possible to
pin down the quality. There is not enough information to do so.
That's my whole point. There IS enough information. In fact, the temperatures
and pressure don't matter.
The input water volume and the input electrical energy are not (seriously) in
dispute.
Then we only need to determine ONE thing : is the chimney overflowing, or not.
If it IS overflowing, then the Steam Quality is between 0% Dry and 74% Dry --
and the eCat might be producing NO energy.
If it is NOT overflowing, then the steam quality is above 75% Dry -- and the
eCat is shown to be real.
