Hi Bill In case it helps I just did a test using PTT switching and PTT does drop off (as well as the tones) at the time I click "Halt TX" even though the TX: "message" indicator still shows it is TXing.
Rex On 11/06/2015 8:39 AM, Bill Somerville wrote: > On 10/06/2015 23:28, Rex wrote: >> Hi All > Hi Rex, >> From my testing here on both XP and Win7 operating systems the "Enable >> Tx" and "Halt Tx" buttons do now work as Bill describes. I am using >> r5567. I think the confusion arises because the Tx: "Message" indicator >> at the left hand bottom of the main window stays on after "Halt Tx" is >> pressed (until the end of that TX period) which makes you think it is >> still transmitting. However, if you listen to the tones you will find it >> has actually stopped. > That is certainly a defect. If you are using VOX for PTT you would not > have a serious problem but I suspect any PTT switching is doing the same > as the status indicator which is more serious. > > I am not able to reproduce that in the current development version. I > will check later in v1.5.0 and get back to you for more detailed steps > if I can't get it there. > > Thanks for checking this out. >> Probably useful to have a minor fix to turn off the bottom left hand TX: >> "message" indicator at the same time as the tones are turned off. >> >> Rex VK7MO > 73 > Bill > G4WJS. > ------------------------------------------------------------------------------ _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
