On Sun, Jun 17, 2018 at 9:16 AM Claude Frantz <claude.fra...@bayern-mail.de>
wrote:
>
> can you type "pacmd list-sources" and see if there is anything abnormal.
>
Nothing jumped out at me...
$ pacmd list-sources
4 source(s) available.
index: 2
name: <alsa_output.pci-0000_03_06.0.analog-surround-51.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1030
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% /
0.00 dB, rear-left: 65536 / 100% / 0.00 dB, rear-right: 65536 / 100% /
0.00 dB, front-center: 65536 / 100% / 0.00 dB, lfe: 65536 / 100% / 0.00
dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 6ch 44100Hz
channel map: front-left,front-right,rear-left,rear-right,front-center,lfe
Surround 5.1
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 1981.32 ms
monitor_of: 1
card: 3 <alsa_card.pci-0000_03_06.0>
module: 9
properties:
device.description = "Monitor of CMI8788 [Oxygen HD Audio] (CMI8786 (Xonar
DG)) Analog Surround 5.1"
device.class = "monitor"
alsa.card = "2"
alsa.card_name = "Xonar DG"
alsa.long_card_name = "C-Media Oxygen HD Audio at 0xd000, irq 20"
alsa.driver_name = "snd_oxygen"
device.bus_path = "pci-0000:03:06.0"
sysfs.path = "/devices/pci0000:00/0000:00:14.4/0000:03:06.0/sound/card2"
device.bus = "pci"
device.vendor.id = "13f6"
device.vendor.name = "C-Media Electronics Inc"
device.product.id = "8788"
device.product.name = "CMI8788 [Oxygen HD Audio] (CMI8786 (Xonar DG))"
device.string = "2"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
* index: 3
name: <alsa_input.pci-0000_03_06.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9039
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% /
0.00 dB
balance 0.00
base volume: 41350 / 63% / -12.00 dB
volume steps: 65537
muted: yes
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 48000Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 1.00 .. 682.67 ms
card: 3 <alsa_card.pci-0000_03_06.0>
module: 9
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "Multichannel"
alsa.id = "Multichannel"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "2"
alsa.card_name = "Xonar DG"
alsa.long_card_name = "C-Media Oxygen HD Audio at 0xd000, irq 20"
alsa.driver_name = "snd_oxygen"
device.bus_path = "pci-0000:03:06.0"
sysfs.path = "/devices/pci0000:00/0000:00:14.4/0000:03:06.0/sound/card2"
device.bus = "pci"
device.vendor.id = "13f6"
device.vendor.name = "C-Media Electronics Inc"
device.product.id = "8788"
device.product.name = "CMI8788 [Oxygen HD Audio] (CMI8786 (Xonar DG))"
device.string = "front:2"
device.buffering.buffer_size = "131072"
device.buffering.fragment_size = "131072"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "CMI8788 [Oxygen HD Audio] (CMI8786 (Xonar DG)) Analog
Stereo"
alsa.mixer_name = "CMI8786"
alsa.components = "CS4245 CMI8786"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-input-front-mic: Front Microphone (priority 8500, latency offset 0
usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
analog-input-mic: Microphone (priority 8700, latency offset 0 usec,
available: unknown)
properties:
device.icon_name = "audio-input-microphone"
analog-input-linein: Line In (priority 8100, latency offset 0 usec,
available: unknown)
properties:
analog-input-aux: Analog Input (priority 8000, latency offset 0 usec,
available: unknown)
properties:
active port: <analog-input-mic>
index: 12
name:
<alsa_output.usb-C-Media_Electronics_Inc._USB_Audio_Device-00.analog-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1040
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% /
0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 48000Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 1837.50 ms
monitor_of: 6
card: 8 <alsa_card.usb-C-Media_Electronics_Inc._USB_Audio_Device-00>
module: 32
properties:
device.description = "Monitor of Audio Adapter (Unitek Y-247A) Analog
Stereo"
device.class = "monitor"
alsa.card = "3"
alsa.card_name = "USB Audio Device"
alsa.long_card_name = "C-Media Electronics Inc. USB Audio Device at
usb-0000:00:12.2-1.4, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:12.2-usb-0:1.4:1.0"
sysfs.path =
"/devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.4/1-1.4:1.0/sound/card3"
udev.id = "usb-C-Media_Electronics_Inc._USB_Audio_Device-00"
device.bus = "usb"
device.vendor.id = "0d8c"
device.vendor.name = "C-Media Electronics, Inc."
device.product.id = "0014"
device.product.name = "Audio Adapter (Unitek Y-247A)"
device.serial = "C-Media_Electronics_Inc._USB_Audio_Device"
device.string = "3"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
index: 13
name:
<alsa_input.usb-C-Media_Electronics_Inc._USB_Audio_Device-00.analog-mono>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9049
volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 27111 / 41% / -23.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 1ch 48000Hz
channel map: mono
Mono
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 36.00 .. 1837.50 ms
card: 8 <alsa_card.usb-C-Media_Electronics_Inc._USB_Audio_Device-00>
module: 32
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "3"
alsa.card_name = "USB Audio Device"
alsa.long_card_name = "C-Media Electronics Inc. USB Audio Device at
usb-0000:00:12.2-1.4, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:12.2-usb-0:1.4:1.0"
sysfs.path =
"/devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.4/1-1.4:1.0/sound/card3"
udev.id = "usb-C-Media_Electronics_Inc._USB_Audio_Device-00"
device.bus = "usb"
device.vendor.id = "0d8c"
device.vendor.name = "C-Media Electronics, Inc."
device.product.id = "0014"
device.product.name = "Audio Adapter (Unitek Y-247A)"
device.serial = "C-Media_Electronics_Inc._USB_Audio_Device"
device.string = "hw:3"
device.buffering.buffer_size = "176400"
device.buffering.fragment_size = "88200"
device.access_mode = "mmap+timer"
device.profile.name = "analog-mono"
device.profile.description = "Analog Mono"
device.description = "Audio Adapter (Unitek Y-247A) Analog Mono"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB0d8c:0014"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
ports:
analog-input-mic: Microphone (priority 8700, latency offset 0 usec,
available: unknown)
properties:
device.icon_name = "audio-input-microphone"
active port: <analog-input-mic>
> Before starting wsjtx, try to enter "pulseaudio --cleanup-shm".
>
Did that, but haven't gotten it to freeze again yet...
Thanks,
Richard
KF5OM
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
