at 13:18, Cory Quammen <cory.quam...@kitware.com> wrote:
> Andrew,
>
> Responses inlined below:
>
> On Fri, Jan 19, 2018 at 6:27 AM, Andrew Parker via ParaView
> <paraview@paraview.org> wrote:
> > Dear all,
> >
> > Sorry to post onto an old thread. I h
[Sorry, I forgot to change the mail address to Paraview. So copying it to
the list.]
Hello. I use ParaView 5.4.1 and I checked Integrate Variables on volume
now. It works but, as in some other cases in ParaView, it requires the
single entities type. For example, if you have a domain (volume) and
variable to integrate.
If you have lots of variables like in CFD results it's very inconvenient to
dig through all variables in Intagrate results.
2018-02-01 15:56 GMT+03:00 Andrew Roberts <and...@thevisualroom.com>:
> Hello,
>
> I have a function for mass flowrate that I want to p
t).
Kind regards,
Andrew
___
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView
Search
Thank you very much for these comments. I'll give them a go and follow up
if need be.
Thanks,
Andy
On 19 January 2018 at 13:18, Cory Quammen <cory.quam...@kitware.com> wrote:
> Andrew,
>
> Responses inlined below:
>
> On Fri, Jan 19, 2018 at 6:27 AM, Andrew Parker via
Dear all,
Sorry to post onto an old thread. I have been reading this thread and the
related write up here:
https://www.paraview.org/Wiki/Advanced_Tips_and_Tricks#Animating_a_static_vector_field
This thread (and the tips and tricks post) is really close to what I want
to do, but I have a few
Hello. Possibly the Slice filter with "Cylinder" and "Crinkle slice"
options will produce the required result (I checked in ParaView 5.2).
2017-12-20 18:46 GMT+03:00 Andy Bauer :
> The Threshold filter works by selecting cells that have cell data in the
> selected range.
Hello.
For calculationg volumes and areas, the "Cell Data" attribute type of
Integrate variables filter is usable. You don't need to define additional
constant field for this. I checked it now and it seems to give the correct
domain volume (554 m3 in SolidWorks, 557 m3 in ParaView). The error may
hen I visualize them, the Streamline filter
tries to draw lines from every point of initial slice, not from "glyphed"
points.
So I still stay with Mask Points + Random sampling + Randomized ID strides.
2017-11-23 11:48 GMT+03:00 kenichiro yoshimi <rccm.kyosh...@gmail.com>:
> Hi And
, the best results are with Random sampling +
randomised ID strides, but without limiting the maximum number of points;
instead of this limit I preview points with glyphs and then feed these
point to the Stream tracer with custom source)
2017-10-25 9:41 GMT+03:00 Andrew <antech...@gmail.
Hello. If I get it right, the "Crincle slice" option of the Slice filter
may be useful for you. Further clipping by coordinates is available with
the Threshold filter.
2017-11-08 17:29 GMT+03:00 Amine Aboufirass :
> Hello,
>
>
>
> I have a 3-dimensional unstructured
s aligned? If so, you can use a regular source eg. Wavelet
> or Mandlebrot to generate the evenly spaced points by setting the extents
> appropriately.
>
> Utkarsh
>
> On Mon, Oct 23, 2017 at 2:41 AM, Andrew <antech...@gmail.com> wrote:
>
>> Hello.
>> I need
Hello.
I need to distribute points on a slice equally to start streamlines from
these points. The problem is that the Mask Points filter seems to not to
have such option. I tried all combinations of randomizing in this filter
but the problem persist. My mesh is unstructured tetra with inflation
Hello.
Some time ago I used the Silhouette filter for ParaView to visualize
geometry edges (not mesh but indeed *geometry* edges). But I've missed the
file and cannot find it for download now... Would, somebody, please, share
this filter or give the download link? As some other people do, I use
Hello.
Possibly the Threshold filter is what you looking for (if you need to
select a number of points in specified coordinates range). You can use 2-3
filters in series to shape the region in 3 cartesian directions.
2017-09-11 23:12 GMT+03:00 Yifei Ma :
> Hi Paraviewers,
>
ript to do it, and I need to tweak this script every
time variable names change).
2017-08-25 18:14 GMT+03:00 Niaz M. via ParaView <paraview@paraview.org>:
> Hi Andrew:
> Thats a smart way to create Boundary. Just wondering if you have some
> curved boundary, ho
a ~200KB .pdf, which is much more reasonable:
https://www.dropbox.com/s/njavup5vwubsq8p/ri-cs.pdf?dl=1
This is all with ParaView 5.0.1. At various times I tried downloading
Paraview 5.3-5.4, but there was no improvement in this area (and, IIRC,
some regressions, such as glitchy pdfs).
Thanks,
Andrew
Hello. Looks like you have some antivirus-related problem.
2017-08-24 9:51 GMT+03:00 Bence Somogyi via ParaView
:
> Dear All,
>
> Using the latest version for Windows
> ["ParaView-5.4.1-Qt5-OpenGL2-MPI-Windows-64bit.zip
> "] I face the following problem: When I execute
be described in
good words and easily can hang. Don't use it if you can. CFD Post and
ParaView compared to this thing in Fluent are unrealistic good!
2017-08-23 17:14 GMT+03:00 Niaz M. via ParaView <paraview@paraview.org>:
> Hi Andrew:
> Thanks for sharing your experience. Yes I have fi
Hello, Niaz.
I also noticed the same problem in some cases with export from Fluent. I
suspect that Fluent write files incorrectly, as if every cell was a
separate domain. It explains why ParaView becomes very slow with such files
and why we cannot remove mesh lines from representation. Sorry,
Is there anywhere that highlights what version of qt should be used for
building from source? Current version of qt being 5.9 from its website. Is
paraview on this version yet or an older version.
___
Powered by www.kitware.com
Visit other Kitware
Ken, thanks for this idea about delayed ParaView start and about RDP
issues. Actually, I use FreeRDP 1.0.2 on CentOS 6.5 laptop, I don't know
should it work with "real" OpenGL or with "fake" OpenGL. There are also
some Citrix services on remote machine (CtxSvcHost, CitrixCseEngine
e.t.c.), maybe
Hello. I use ParaView via RDP on remote Windows-7 (x64) machine. Version
5.4.0 (x64) shows black render window...
Disabling FXAA didn't help. Some info from About dialog: Qt version:
5.8.0, OpenGL Vendor: NVIDIA Corporation, OpenGL Version: 4.5.0 NVIDIA
377.35 (current driver version is
Hello.
Anyway, ParaView has not full support for Fluent files (cas + dat). It
doesn't see all the variables (at least in versions up to 5.0.1 RC2 that I
use, although I know that I should update to 5.2 or 5.3). Instead of
reading Fluent format, I convert to EnSight (in Fluent) and then read in
w is under Paraview/VTK/ThirdParty/xdmf3.
Andrew Burns
Software Engineer | Parsons
Phone: 410-306-0409
ARL DSRC
andrew.j.burns35@mail.mil
-Original Message-
From: ParaView [mailto:paraview-boun...@paraview.org] On Behalf Of Frederic
Perez
Sent: Saturday, February 11, 2017 6:03 PM
To
I think that is because Xdmf3 uses different syntax for concatenation. Try
using Function="$0|$1|$2|$3|$4|$5|$6|$7|$8|$9" with the Xdmf3 reader.
-Andrew Burns
-Original Message-
From: Frederic Perez [mailto:fredericper...@gmail.com]
Sent: Wednesday, February 08, 2017 4:50 PM
Are you using the Xdmf2 or Xdmf3 reader?
Andrew Burns
Software Engineer | Parsons
Phone: 410-306-0409
ARL DSRC
andrew.j.burns35@mail.mil
-Original Message-
From: ParaView [mailto:paraview-boun...@paraview.org] On Behalf Of Frederic
Perez
Sent: Wednesday, February 08, 2017 3:39 PM
grids loaded
in memory simultaneously.
>From my knowledge, Paraview actually does check if the geometry is reused and
>doesn't reload it if that is the case. However, it still needs to do some
>conversions behind the scenes when it loads a timestep.
-Andrew
-Original Message-
the topology and
geometry of the first one.
Andrew Burns
Software Engineer | SAIC
Phone: 410-306-0409
ARL DSRC
andrew.j.burns35@mail.mil
-Original Message-
From: ParaView [mailto:paraview-boun...@paraview.org] On Behalf Of Daniel Frisch
Sent: Wednesday, January 25, 2017 1:14 PM
To: paravie
This is because the Xdmf3 reader does not support the Hyperslab Timetype. One
Time item per grid is the preferred method.
Andrew Burns
Software Engineer | SAIC
Phone: 410-306-0409
ARL DSRC
andrew.j.burns35@mail.mil
-Original Message-
From: ParaView [mailto:paraview-boun
Looked into this. There are two errors going on.
1: The type should be "Float" not "Double" Xdmf defines double as float with
precision 8.
2: There is an order of operations error in the handling of the X_Y_Z type.
We'll put a fix for it into the next Xdmf3 re
Hello. Possibly Threshold filter will help you. To limit points by 3
coordinates try to define 3 Threshold filters in series.
2016-04-03 18:55 GMT+03:00 Vaibhav Agrawal <
vaibhav.agra...@postgrad.curtin.edu.au>:
> Hi Paraview-Help,
>
> I am working on the DEM simulations of bubbling fluidized
Hello. I noticed the same behaviour in ParaView 4.3 on CentOS 6.7. Looks
like bug. Worked around with calculating the velocity magnitude as scalar.
There is also another bug or feature of volume rendering: I couldn't make
it render for all domains, it only renders one domain (for example, when I
Looking at the old error reports, it's an issue of differences in indexing in
programming languages. I guess Paraview was initially designed with Fortran's
output in mind?
-Andrew Burns
-Original Message-
From: Lúcio Corrêa [mailto:labcor...@gmail.com]
Sent: Friday, September 09, 2016
We noticed this also, I believe the plan is to remove the flipping of dimension
ordering. However, I am unsure on when that will occur.
Andrew Burns
Software Engineer | Leidos
Phone: 410-306-0409
ARL DSRC
andrew.j.burns35@mail.mil
-Original Message-
From: ParaView [mailto:paraview
AFAIK, ParaView has no capability of projecting vector on surfaces. That's
why you need to work around with Calculator every time you need to get a
vector projection. If your plane is not just a coordinate plane, you can
use Generate Surface Normals filter, but it doesn't work on all datasets
(in
Hello. AFAIK, there is no any elementary filter to do it. I usually create
a Density*Velocity and Density*Velocity*Scalar variables in Calculators and
then apply an Integrate variable filter. It integrates by area so I get
Rho*W*dF and Rho*W*Scalar*dF integrals. Dividing second by first I get
the XML parser that Xdmf uses.
Andrew Burns
Lockheed Martin
Software Engineer
410-306-0409
ARL DSRC
andrew.j.burns35@mail.mil
-Original Message-
From: ParaView [mailto:paraview-boun...@paraview.org] On Behalf Of Elliot Kaplan
Sent: Friday, June 10, 2016 11:47 AM
To: paraview@paravie
Yes, I hope this is what you want.
2016-04-01 15:15 GMT+03:00 Utkarsh Ayachit :
> > Sorry for small offtopic, but I didn't notice any remote access issues
> with
> > ParaView 5.0.1 RC2 on Windows 7 x64, but I use Linux client (FreeRDP
> 1.0.2).
>
> That's curious.
Sorry for small offtopic, but I didn't notice any remote access issues with
ParaView 5.0.1 RC2 on Windows 7 x64, but I use Linux client (FreeRDP 1.0.2).
2016-04-01 4:58 GMT+03:00 Utkarsh Ayachit :
> You cannot use ParaVIew 5.0 or later over remote desktop anymore.
>
faster than in CFD Post that
slowly rebuilds contour on every change on number of ticks, ParaView does
it almost instantly). I read some discussions a bit and I suppose that the
current behavior of color vr is a "common choice".
2016-03-21 8:34 GMT+03:00 Andrew <antech...@gmail.com>
*Utkarsh,*
Thanks for notification. I will try this version as soon as possible.
2016-03-21 4:41 GMT+03:00 Utkarsh Ayachit <utkarsh.ayac...@kitware.com>:
> Andrew,
>
> ParaView 5.0.1-RC2 binaries are now available for download. Please
> give them a try and let me know i
in the
> > right direction -- it just wasn't FILE_OFFSET_BITS that was the issue.
> > It was the fact that on Windows the stat function is different,
> > period. I am hoping to push a fix in for 5.0.1.
> >
> > On Wed, Mar 9, 2016 at 7:32 AM, Andrew <antech...@gmail.com&g
Utkarsh Ayachit,
Hello. Did you try the trick with EnSight geometry file reader? Thanks.
2016-03-03 17:51 GMT+03:00 Utkarsh Ayachit :
> > About test file. It's simple, IMHO. Generate any garbage file or take any
> > existing big file. Rename it to have the geometry
ParaView team, please, take
a look at this, I need to process my big case with Python script in
ParaView...
On Mar 1, 2016 18:52, "Samuel Key" <samuel...@bresnan.net> wrote:
> Andrew,
>
> Regarding your question, "Do you have any EnSight Gold-Format files
> greater t
al" *stat*() that is, to my current knowledge, is 32 bit:
https://github.com/Kitware/VTK/blob/master/IO/EnSight/vtkEnSightGoldBinaryReader.cxx
(Please see lines 100 and 101)
May it be the cause of the subj? Sorry if I'm wrong, I'm not a professional
programmer.
2016-03-01 9:38 GMT+03:00
ot;hello-world"-like stat() test under Windows on a large file...
2016-03-01 8:53 GMT+03:00 Andrew <antech...@gmail.com>:
> Hello Samuel.
>
> Sorry, but I can't undersatand how can the file fragmentation affect it's
> readability and parsing. Even if the file has thou
6-02-29 20:27 GMT+03:00 Samuel Key <samuel...@bresnan.net>:
> Andrew,
>
> Let us focus on MS Windows for a moment. The NTS file system and the use
> of the file system by the O/S is not quite as it should be.
>
> In my experience, the above combination routinely creates an
Dear All,
I have recently been having problems reading pvtu files in paraview when those
files contain arbitrary polyhedrons: this is from the output of a large scale
code that runs in parallel via mpi. To show the problem, I have written a very
small sample code, attached, that runs in
GNS format is not
a wayout...
2016-02-29 9:00 GMT+03:00 Andrew <antech...@gmail.com>:
> I performed another test with *EnSight 6* (not Gold) format. Conversion
> was made on Win-7 x64 machine. The same results: PV 4.3 crashed, PV 5.0
> "cannot stat" (full error message is in my
I performed another test with *EnSight 6* (not Gold) format. Conversion was
made on Win-7 x64 machine. The same results: PV 4.3 crashed, PV 5.0 "cannot
stat" (full error message is in my first post on this topic). Sorry, now I
need to work on with my report...
2016-02-29 8:47 GMT+03
displaye something
else).
2016-02-26 19:31 GMT+03:00 Samuel Key <samuel...@bresnan.net>:
> Andrew,
>
> For what it is worth, I use ParaView
> (ParaView-5.0.0-Qt4-OpenGL2-Windows-64bit) on Windows-7 64bit. I just now
> tested two medium-sized, EnSight Gold-formatted simulation res
Hello. We use Ansys CFX in our work but the standard post-processor
CFD-Post consumes one of Ansys licenses while Paraview is free. So I often
make pictures for reports with ParaView to preserve Ansys license for
another users/needs (because other users are not familiar with ParaView and
CFD-Post
I am trying to read an Xdmf subset into Paraview 4.4, but I get the
assertion (debug build):
*vtkXdmfHeavyData.cxx:293: vtkDataObject
*vtkXdmfHeavyData::ReadUniformData(xdm**f2::XdmfGrid *, int): Assertion
`xmfGrid->IsUniform() && "Input must be a uniform xdmf grid."' failed.*
I dug through the
help would be greatly appreciated.
Thanks!
Andrew Solis
___
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki at:
http://pa
.
Thanks!
Andrew Solis
___
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView
Search
Sorry, I also probably should of mentioned that I am running CentOS on all
of the systems.
Thanks
Andrew Solis
On Mon, Sep 21, 2015 at 11:02 AM, andrew solis <andrewjsoli...@gmail.com>
wrote:
> Hey everyone,
>
> I'm trying to run Paraview using the vrpn plugin so that I
Awesome, that seemed to do the trick.
Thanks!
On Thu, Sep 17, 2015 at 11:10 PM, Cory Quammen <cory.quam...@kitware.com>
wrote:
> Hi Andrew,
>
> What is the value of your VRPN_LIBRARY variable? I suspect it is
>
> "/home/ajs2987/Projects/ParaviewOnStallion/vrpn-07.33-b
would be appreciated.
Thanks
Andrew Solis
___
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/W
Menno Deij - van Rijswijk,
Great thanks! Your suggestions worked perfectly! Now I have ParaView 4.3.1
compiled with MPI and Catalyst for co-processing.
2015-08-18 14:04 GMT+03:00 Deij-van Rijswijk, Menno m.d...@marin.nl:
Hi Andrew,
I checked my CMakeCache to see the variables of MPI and I
Folks,
New to paraview, but making some progress.
One thing I have not found a way to make a countour plot where there is a black
line separating every Nth contour level.
Manual is not that much help
Can this be done directly with the baseline tool?
Thanks
ANdy
Andrew Robertson P.E.
CFD Analyst
Folks,
Any add-ons for doing mass weighted and mass flow weighted averages.
Just getting started with paraview, I think I see the path to do this. But am
not proud and am sufficiently lazy to use the works of others ;-)
Thanks
-Andy
Andrew Robertson P.E.
CFD Analyst
GASL Operations
Tactical
2:32 PM
To: Robertson, Andrew
Cc: paraview@paraview.org
Subject: Re: [Paraview] Mass weighted, mass flow weighted averages.
I think the best way would be to use the Calculator filter to compute your
derived quantities (e.g. whatever field you want mass weighted divided by
density) and then use
*Andy Bauer*
Thanks!
I don't know how to generate common field from partial blocks with
Calculator but I'm familiar with Extract Blocks cause I use it to extract
boundaries. AFAIR, I tried to integrate on the extracted boundary without
success but I will play with Extract Block filter in different
any flow field variables if it's source is a results file or
cell data to point data). I gave a link on example files to be processed
in previous message (see below).
Thanks for your attention...
Andrew (antech...@gmail.com) 02.07.2015
Hello.
Thanks
Hello.
I use ParaView to visualize Code_Saturne (CFD) calculation results (ParaVis
module in Salome). But I cannot integrate any variable except coordinates
and area or volume. I tried the Cell data to point data before
IntegrateVariables, it changed nothing. I asked this question on Salome and
, ...), but the true time
information appears to be gone.
How can I get this information back so I can properly annotate and view my
data?
I am using vtkImagaData and the outputted files are *.pvti and *.vti files
of the full dataset.
--
Andrew Ho
___
Powered
actually specify text for those?
Thanks
-Andy
Andrew Robertson P.E.
CFD Analyst
GASL Operations
Tactical Propulsion and Controls
ATK
77 Raynor Avenue
Ronkokoma NY 11779
Phone: 631-676-8955tel:631-737-6100%20Ext%20190 - NOTE NEW Number
Fax: 631-588-7023tel:631-588-7023
www.atk.comhttp
Good morning,
I have just upgraded to Paraview 4.3.1 from 4.10, because I was unable to
change the specularity of a surface in 4.1 (this is fixed in 4.3, which is
nice). But now I can't find the headlight option that used to be in 4.1's
render view options.
Without it, the images I need to
the Lights section in
the panel (it's towards the bottom), click the Edit button and
select Additional Headlight in the Lights Editor dialog that pops
up.
Hope that helps,
Cory
On Tue, Mar 17, 2015 at 1:40 PM, Bosler, Peter Andrew
pabo...@sandia.gov wrote:
Good morning,
I have just upgraded
but unfortunately I get an 'administratively prohibited'
message from ssh when I try to connect.
Does anyone know of a solution?
Thanks very much,
Andy.
--
Dr. Andrew Porter
Computational Scientist
Application Performance Engineering Group
Scientific Computing Department
STFC Daresbury Laboratory
Keckwick
in the parametric
function implementations that have been fixed in the VTK master.
I am happy to contribute this if people feel it will be useful.
Just let me know how.
Regards
Andrew
--
___
Andrew J. P. Maclean
Dear all,
This is driving me round the bend. When I have a meshing coming from a
rectilinear source, I get NANs from my normal and face area calculations.
When all other input meshes are used, i.e. unstructured, the results are
correct. To test this I've written the following test code which
I am trying to build a server plugin which utilizes the boost::regex
library, and for some reason when I quit paraview I get this message:
Inconsistency detected by ld.so: dl-close.c: 762: _dl_close: Assertion
`map-l_init_called' failed!
I've setup a basic project which demonstrates the issue:
/CMakeFiles/QtTesting.dir/all] Error 2
make: *** [all] Error 2
Regards
Andrew
--
___
Andrew J. P. Maclean
___
___
Powered by www.kitware.com
Visit other Kitware open-source
creates a 2D
structured mesh and that loads just fine. However, strangely enough the
extents are in a different order than what I thought they should be ([0, 0,
0, 1, 0, 2])
--
Andrew Ho
___
Powered by www.kitware.com
Visit other Kitware open-source projects
().GetPointData().GetScalars().SetName('Scalars')
# pd = randomHillsSource.GetOutput().GetPointData()
# print pd
Is it possible to do this on ParaView?
Thanks in advance for any help.
Andrew
--
___
Andrew J. P. Maclean
successfully with QT 5.3.
Has anyone else had problems building with QT5?
Regards
Andrew
--
___
Andrew J. P. Maclean
___
___
Powered by www.kitware.com
Visit other
All,
I thought I'd forward this onto the paraview lists in case somebody could
think of a way to do this? Please see my email below which I originally
sent to the vtk user list. Any help would be very much appreciated,
including the fact that it just cannot be done. I would in particular
All,
I thought I'd forward this onto the paraview list in case somebody could
think of a way to do this? Please see my email below which I originally
sent to the vtk user list. Any help would be very much appreciated,
including the fact that it just cannot be done. I would in particular
, Andrew Parker
andy.john.par...@googlemail.com wrote:
All,
I thought I'd forward this onto the paraview list in case somebody could
think of a way to do this? Please see my email below which I originally
sent to the vtk user list. Any help would be very much appreciated,
including
animation-avi. I expect that
at each frame every second a different grid would show and get animated.
Please feel free to ask more questions regarding my setup. I would post
screenshots but the mailing list is archaic as this is 2013 and better
alternatives exist now.
Andrew
Hi,
Just a quick one. Is there any filter in vtk/paraview to obtain the median
dual of a mesh? I'm happy to assume the cells are know cell types, but
would want it for any input type of mesh.
Anybody had success with something like this in vtk?
Cheers,
Andy
Sorry to repost. Does anybody have a feel for whether I can apply a filter
and essentially produce a 3d volume mesh with associated scalars and
transformed vectors, from it's 2d counter part using vtk?
i.e. a cylindrically symmetric simulation converted to a valid 3d volume
mesh. I can apply
All,
I am doing this in code using vtk, but can be reproduced using paraview as
noted below.
I have a 2d mesh which represent a cylindrically symmetric simulation. I
want to be able to revolve this around the z-axis to create a 3d mesh.
However, when doing this using the rotational extrusion
Hi,
So I've been having some problems with vtkOBBTree using the
intersectWithLine method with the following signature:
int IntersectWithLine (double a0[3], double a1[3], double tol, double t,
double x[3], double pcoords[3], int subId, vtkIdType cellId,
vtkGenericCell *cell)
In particular,
Hi,
So as requested, I built the latest rc against 4.7.2 and that also happens
to be built against qt 4.8.3, and it compiles and installs fine. This is
built against openmpi 1.6.2 with use_mpi on. However, I have noticed that
when loading multiple files around 20 of them, vtu's in this instance,
Hi,
I get this error building a fresh clone of 3.14.1 using gcc 4.7.2, vtk
build and works perfectly fine with this compiler so I presume it's a
slight change in ordering that has caused the problem.:
[ 30%] Building CXX object
VTK/Rendering/CMakeFiles/vtkRendering.dir/vtkFreeTypeUtilities.cxx.o
their own global ids so I don't use d3 for that.
Regards,
Paul
On 7 November 2012 14:50, George Zagaris george.zaga...@kitware.comwrote:
On Wed, Nov 7, 2012 at 9:34 AM, Andrew Parker
andy.john.par...@googlemail.com wrote:
Many thanks for that. I perform some threshold stuff early on, so
of data object it really is.
-Ken
From: Andrew Parker andy.john.par...@googlemail.com
Date: Tuesday, November 6, 2012 9:50 AM
To: Kenneth Moreland kmo...@sandia.gov
Cc: vtkus...@vtk.org vtkus...@vtk.org, paraview@paraview.org
paraview@paraview.org
Subject: [EXTERNAL] Re: [Paraview
on.
-Ken
Sent from my iPad so blame autocorrect.
On Nov 7, 2012, at 2:38 AM, Andrew Parker
andy.john.par...@googlemail.com wrote:
So that's working now in terms of the cast, forgot GetOutput() inside the
cast operator! The returned vtkUGrid is now fully populated and contains
.
Cheers again,
Andy
On 7 November 2012 14:50, George Zagaris george.zaga...@kitware.com wrote:
On Wed, Nov 7, 2012 at 9:34 AM, Andrew Parker
andy.john.par...@googlemail.com wrote:
Many thanks for that. I perform some threshold stuff early on, so
basically
Perhaps an easy solution
From: Andrew Parker andy.john.par...@googlemail.com
Date: Wednesday, November 7, 2012 9:31 AM
To: George Zagaris george.zaga...@kitware.com
Cc: Kenneth Moreland kmo...@sandia.gov, vtkus...@vtk.org
vtkus...@vtk.org, paraview@paraview.org paraview@paraview.org
Subject: [EXTERNAL] Re: [vtkusers
Hi,
Hope you can help. I have some code running in parallel, that by other
means I have constructed nprocs worth of vtkRectilinearGrids, one per
process. Each of which is a valid nprocs-worth of the whole serial mesh,
I've check this and I am happy with that i.e. it's partitioned properly and
be possible to request a layer of ghost cells by
setting UPDATE_NUMBER_OF_GHOST_LEVELS at the bottom of the pipeline, but
I'm not totally sure how to make that work. It's probably easier (or at
least cleaner) to do it from within a filter.
-Ken
From: Andrew Parker andy.john.par
. It might be possible to request a layer of ghost cells by
setting UPDATE_NUMBER_OF_GHOST_LEVELS at the bottom of the pipeline, but
I'm not totally sure how to make that work. It's probably easier (or at
least cleaner) to do it from within a filter.
-Ken
From: Andrew Parker andy.john.par
a vtkUnstructuredGrid::SafeDownCast() to the
data to get the unstructured mesh (and access to the point data).
-Ken
From: Andrew Parker andy.john.par...@googlemail.com
Date: Tuesday, November 6, 2012 9:32 AM
To: Kenneth Moreland kmo...@sandia.gov
Cc: vtkus...@vtk.org vtkus...@vtk.org, paraview
wasc...@sandia.gov wrote:
Correct. I should have written up a bug before, but will do so now.
Alan
From: Andrew Maclean [mailto:andrew.amacl...@gmail.com]
Sent: Thursday, July 05, 2012 5:24 PM
To: Scott, W Alan
Cc: paraview@paraview.org
Subject: Re: [EXTERNAL] [Paraview
.
Thanks
Andrew
On Fri, Jul 6, 2012 at 9:11 AM, Scott, W Alan wasc...@sandia.gov wrote:
I had the same issue. If I remember correctly, I “think” the solution
was to turn off BUILD_EXAMPLES and BUILD_TESTING.
** **
Alan
** **
*From:* paraview-boun...@paraview.org [mailto
Hi,
Using 4.7.1 I get the following compile error when compiling the 3.14.1
tag, it looks like the pointer type is unknown, possibly missing header?
[ 21%] Building CXX object
VTK/Rendering/CMakeFiles/vtkRendering.dir/vtkFreeTypeUtilities.cxx.o
1 - 100 of 135 matches
Mail list logo