Is it safe to say that upgrading a P8 SM remotely to 13.4 is ok as long as
you are not using NAT?
On Thu, Jul 16, 2015 at 1:39 PM, Mark Radabaugh <m...@amplex.net> wrote:
> Chitrang - where do you want the bricks?
>
> Just for you we pulled the engineering.cgi from a 12.2 and a 13.1.3 P8 FSK
> radio and then bricked them both with 13.4 and gave the customers new
> radios.
>
> Where do you want the dead radios and the dump files sent?
>
> You can keep the P8’s and add them to your regression testing lab.
>
> Mark
>
>
> > On Jul 14, 2015, at 10:08 PM, Chitrang Srivastava <
> chitrang.srivast...@cambiumnetworks.com> wrote:
> >
> > Hi Bill,
> >
> > In order to investigate P8 issue, please do following,
> >
> > AFTER upgrade to P8 and applying configuration changes but BEFORE doing
> reboot, take out engineering.cgi.
> > Please also send configuration file as well from Configuration - > Unit
> Setting.
> >
> > Does without NAT P8 is accessible?
> > If the above steps didn't work ( actually they should because most of
> our configuration changes applies on next reboot) they please send screen
> shot of NAT configuration page before you press Save Changes.
> >
> > Thanks,
> > Chitrang Srivastava
> > Cambium Networks
> >
> > ________________________________________
> > From: Af <af-boun...@afmug.com> on behalf of Bill Prince <
> part15...@gmail.com>
> > Sent: 15 July 2015 05:35:23
> > To: af@afmug.com
> > Subject: Re: [AFMUG] Software 13.4: P8 FSK not recommended
> >
> > Nope. Have already loaded 13.4 on P9, P10, and P11, and all is good with
> > them.
> >
> > Have also loaded 13.4 on PMP430 and PMP450.
> >
> > bp
> > <part15sbs{at}gmail{dot}com>
> >
> > On 7/14/2015 4:59 PM, George Skorup wrote:
> >> I wonder if this affects P9 boards as well? That would suck. Not sure
> >> if I have one around the office to test.
> >
> >
>
>
