No. Too busy right now. Weather is nice and we're trying to get tower
work done. If you guys are coming up on 13.4.1 soon, I'll probably just
wait for that. Hopefully you'll just limited the P8 NAT table to 1024 so
it will boot. Because physical access to those few I have is nearly
impossible (chemical plants, and they have to shut down for us to get
access).
I noticed that 450 AP screenshot you linked on the community site is
mine. That just happens to be the AP that we discovered was leaking
(yes, the case itself). Some components on the board have visible
corrosion, so I bet that has been the issue at that site all along. We
put a Lite AP in its place a couple weeks ago and it hasn't had a single
problem. I sent an email with pictures to supp...@cambiumnetworks.com
last Saturday about this leaky AP, but nobody has responded. And
the"open a support case" option on the website doesn't work. Maybe it
does now, I haven't tried.
I need minions. Or maybe a Stewie Griffin cloning machine. No wait, time
machine would be better.
On 7/22/2015 10:35 PM, Chitrang Srivastava wrote:
Hi George,
Did you get a chance to checkout Gps sync issue on 13.4 release?
Thanks,
Chitrang
________________________________________
From: Af <af-boun...@afmug.com> on behalf of George Skorup <geo...@cbcast.com>
Sent: 17 July 2015 22:36:42
To: af@afmug.com
Subject: Re: [AFMUG] Software 13.4: P8 FSK not recommended
My bad. I thought I read in the release notes that this was fixed. Maybe
it was in the known issues section and I'm just stupid.
On 7/17/2015 1:17 AM, Chitrang Srivastava wrote:
Hi George,
By the Freerun fix, I mean this issue, where the Power Port shows Sync but the
Sync Status still says searching.
http://community.cambiumnetworks.com/t5/image/serverpage/image-id/279i18BB3380325BDEA1/image-size/original?v=mpbl-1&px=-1
This issue what you are reporting is still present where the software looks for
the GPS Lock from any of the source and whichever it get first, locks it.
We will try to fix this in future releases.
Thanks,
Chitrang
-----Original Message-----
From: Af [mailto:af-boun...@afmug.com] On Behalf Of George Skorup
Sent: 17 July 2015 10:35
To: af@afmug.com
Subject: Re: [AFMUG] Software 13.4: P8 FSK not recommended
450 APs still boot up using the on-board GPS on 13.4 release. Just updated an
AP with a SyncPipe attached and it came right up on the on-board instead like
13.2. So I guess that's not fixed.
I've mentioned this before. If you have on-board + power port, it will boot up
using the power port. It's only when you have timing port & on-board. This
started early in 13.2 builds with the GPS data bug (like Motorola binary on the
timing port, aka CMM2 or SyncPipe). I know most of the story behind that. I could
be wrong, but I'm going to say that NMEA data is preferred over Mot binary and
that's why it comes up on the on-board.
This is very annoying, especially when you get an iGPS lock that sucks and you
don't get time/date info for hours or days and all of the log entry times are
stupid.
