My bad. I thought I read in the release notes that this was fixed. Maybe
it was in the known issues section and I'm just stupid.
On 7/17/2015 1:17 AM, Chitrang Srivastava wrote:
Hi George,
By the Freerun fix, I mean this issue, where the Power Port shows Sync but the
Sync Status still says searching.
http://community.cambiumnetworks.com/t5/image/serverpage/image-id/279i18BB3380325BDEA1/image-size/original?v=mpbl-1&px=-1
This issue what you are reporting is still present where the software looks for
the GPS Lock from any of the source and whichever it get first, locks it.
We will try to fix this in future releases.
Thanks,
Chitrang
-----Original Message-----
From: Af [mailto:af-boun...@afmug.com] On Behalf Of George Skorup
Sent: 17 July 2015 10:35
To: af@afmug.com
Subject: Re: [AFMUG] Software 13.4: P8 FSK not recommended
450 APs still boot up using the on-board GPS on 13.4 release. Just updated an
AP with a SyncPipe attached and it came right up on the on-board instead like
13.2. So I guess that's not fixed.
I've mentioned this before. If you have on-board + power port, it will boot up
using the power port. It's only when you have timing port & on-board. This
started early in 13.2 builds with the GPS data bug (like Motorola binary on the
timing port, aka CMM2 or SyncPipe). I know most of the story behind that. I could
be wrong, but I'm going to say that NMEA data is preferred over Mot binary and
that's why it comes up on the on-board.
This is very annoying, especially when you get an iGPS lock that sucks and you
don't get time/date info for hours or days and all of the log entry times are
stupid.