Hi George, By the Freerun fix, I mean this issue, where the Power Port shows Sync but the Sync Status still says searching. http://community.cambiumnetworks.com/t5/image/serverpage/image-id/279i18BB3380325BDEA1/image-size/original?v=mpbl-1&px=-1
This issue what you are reporting is still present where the software looks for the GPS Lock from any of the source and whichever it get first, locks it. We will try to fix this in future releases. Thanks, Chitrang -----Original Message----- From: Af [mailto:af-boun...@afmug.com] On Behalf Of George Skorup Sent: 17 July 2015 10:35 To: af@afmug.com Subject: Re: [AFMUG] Software 13.4: P8 FSK not recommended 450 APs still boot up using the on-board GPS on 13.4 release. Just updated an AP with a SyncPipe attached and it came right up on the on-board instead like 13.2. So I guess that's not fixed. I've mentioned this before. If you have on-board + power port, it will boot up using the power port. It's only when you have timing port & on-board. This started early in 13.2 builds with the GPS data bug (like Motorola binary on the timing port, aka CMM2 or SyncPipe). I know most of the story behind that. I could be wrong, but I'm going to say that NMEA data is preferred over Mot binary and that's why it comes up on the on-board. This is very annoying, especially when you get an iGPS lock that sucks and you don't get time/date info for hours or days and all of the log entry times are stupid.