Did you check for duplex mismatch? On Thu, May 12, 2016 at 3:51 PM, Gino Villarini <ginovi...@gmail.com> wrote:
> laptop direct to mimosa has no issue > > Get Outlook for iOS <https://aka.ms/o0ukef> > > > > > On Thu, May 12, 2016 at 12:47 PM -0700, "Jason Wilson" < > ja...@remotelylocated.com> wrote: > > Rory had that issue with SME if the mimosa ptmp the CPU in the laptop was >> maxing out. >> On May 12, 2016 11:39 AM, "Josh Reynolds" <j...@kyneticwifi.com> wrote: >> >>> http://wiki.mikrotik.com/wiki/Manual:Wiki/Fasttrack#Description >>> >>> >>> On Thu, May 12, 2016 at 1:37 PM, Josh Reynolds <j...@kyneticwifi.com> >>> wrote: >>> > I don't know much about the CCRs. Do they have FastPath and FastTrack >>> > enabled by default? >>> > >>> > On Thu, May 12, 2016 at 1:33 PM, Gino Villarini <ginovi...@gmail.com> >>> wrote: >>> >> no >>> >> >>> >> simple config, static ip on the wan, private ip on lan, nat >>> >> >>> >> On Thu, May 12, 2016 at 2:30 PM, Josh Reynolds <j...@kyneticwifi.com> >>> wrote: >>> >>> >>> >>> Did you copy the config from one CCR to the other? >>> >>> >>> >>> On Thu, May 12, 2016 at 1:24 PM, Gino Villarini <ginovi...@gmail.com >>> > >>> >>> wrote: >>> >>> > Got a customer with a dedicated pipe, 250 Mbps >>> >>> > >>> >>> > Mimosa B11 to a CCR >>> >>> > >>> >>> > BW test from the CCR to our head router provides the BW no problem. >>> >>> > >>> >>> > But Laptop (capable) behind CCR in NAT mode, throughput dies at >>> about >>> >>> > 120 >>> >>> > Mbps >>> >>> > >>> >>> > Changed routers, same issue >>> >>> > >>> >>> > Any ideas? >>> >> >>> >> >>> >>