yes, using fiber, same issue On Thu, May 12, 2016 at 4:35 PM, can...@believewireless.net < p...@believewireless.net> wrote:
> Did you check for duplex mismatch? > > On Thu, May 12, 2016 at 3:51 PM, Gino Villarini <ginovi...@gmail.com> > wrote: > >> laptop direct to mimosa has no issue >> >> Get Outlook for iOS <https://aka.ms/o0ukef> >> >> >> >> >> On Thu, May 12, 2016 at 12:47 PM -0700, "Jason Wilson" < >> ja...@remotelylocated.com> wrote: >> >> Rory had that issue with SME if the mimosa ptmp the CPU in the laptop was >>> maxing out. >>> On May 12, 2016 11:39 AM, "Josh Reynolds" <j...@kyneticwifi.com> wrote: >>> >>>> http://wiki.mikrotik.com/wiki/Manual:Wiki/Fasttrack#Description >>>> >>>> >>>> On Thu, May 12, 2016 at 1:37 PM, Josh Reynolds <j...@kyneticwifi.com> >>>> wrote: >>>> > I don't know much about the CCRs. Do they have FastPath and FastTrack >>>> > enabled by default? >>>> > >>>> > On Thu, May 12, 2016 at 1:33 PM, Gino Villarini <ginovi...@gmail.com> >>>> wrote: >>>> >> no >>>> >> >>>> >> simple config, static ip on the wan, private ip on lan, nat >>>> >> >>>> >> On Thu, May 12, 2016 at 2:30 PM, Josh Reynolds <j...@kyneticwifi.com> >>>> wrote: >>>> >>> >>>> >>> Did you copy the config from one CCR to the other? >>>> >>> >>>> >>> On Thu, May 12, 2016 at 1:24 PM, Gino Villarini < >>>> ginovi...@gmail.com> >>>> >>> wrote: >>>> >>> > Got a customer with a dedicated pipe, 250 Mbps >>>> >>> > >>>> >>> > Mimosa B11 to a CCR >>>> >>> > >>>> >>> > BW test from the CCR to our head router provides the BW no >>>> problem. >>>> >>> > >>>> >>> > But Laptop (capable) behind CCR in NAT mode, throughput dies at >>>> about >>>> >>> > 120 >>>> >>> > Mbps >>>> >>> > >>>> >>> > Changed routers, same issue >>>> >>> > >>>> >>> > Any ideas? >>>> >> >>>> >> >>>> >>> >