Tell us more.  Price, capabilities, URL etc.  

From: Simon Westlake 
Sent: Friday, August 19, 2016 8:54 AM
To: [email protected] 
Subject: Re: [AFMUG] Sonar

Yes, it's been available since early this year. You can sign up on the site and 
get immediate access.


On 8/19/2016 9:45 AM, [email protected] wrote:

  Is anything released?

  From: Jon Bruce 
  Sent: Friday, August 19, 2016 8:44 AM
  To: [email protected] 
  Subject: Re: [AFMUG] DHCP option 82 + Canopy + Powercode

  Yes, Sonar. It's looking really good.



  On 8/19/2016 10:21 AM, Chuck McCown wrote:

    WRT PC, wasn’t Simon working on something that possibly could be a 
competitor?

    From: Jon Bruce 
    Sent: Friday, August 19, 2016 8:07 AM
    To: [email protected] 
    Subject: Re: [AFMUG] DHCP option 82 + Canopy + Powercode

    We're using PC with DHCP for management of SMs and for public IPs.  Each is 
on it's own VLAN and IPs are given out by PC based on MAC address.

    PC can do RADIUS and has it (sort of half, almost, kinda) built in but I 
haven't made it work (yet).  Calling support will only leave you curled up in a 
ball, crying.

    Under Network -> Servers, there is RADIUS and Canopy RADIUS.  I asked once 
what the difference was, what they were meant to do differently and why there 
are two and was met with documentation removed from their site and several 
support calls and emails ignored.

    I hope that helped a little.

    If anyone can share information on RADIUS and PC, I would love it.


    On 8/19/2016 1:19 AM, George Skorup wrote:

      The only thing is full relay vs insertion only. Full relay probably 
wouldn't work in this scenario. Because you can't define the L3 relay IP per 
VLAN. The AP is going to relay all DHCP requests to the specified address. I 
still say the way to go is static management IP on the SMs.

      Wait... am I being stupid again? Is option 82 inserted for the SM itself 
or not? Been a while since I messed with it. If it does, that would be a good 
feature request for Cambium. Let us turn that off for the SM itself.


      On 8/19/2016 12:03 AM, Sean Heskett wrote:

        Good call on the VLANs George!  I think that might be the ticket.   

        That gives me something to try in our lab :)

        -Sean 

        On Thursday, August 18, 2016, George Skorup <[email protected]> wrote:

          Does PC do the zero-touch config? Why can't a new SM come up and get 
the option 66 info for the config URL, then download its config which contains 
a static management IP?

          Or, what about separating things in VLANs? Put your SM management on 
a dedicated VLAN with its own DHCP server instance and the various options you 
need? Customer/user/data VLAN would be another DHCP server where you'd act upon 
the Agent-Remote-ID option 82 info.


          On 8/18/2016 11:25 PM, Sean Heskett wrote:

            right now everything is static (mgmt and public ip) we try to 
deploy SMs with NAT enabled but that's not possible half the time for one 
reason or another. 

            Once we move to powercode I want to use their zero touch config 
(dhcp option 66) to config the SM and then option 82 if the SM is bridged to 
give an ip to their router or our managed calix router.  I'd prefer to not have 
to keep track of router MACs especially if the router is the customer's and not 
our calix.

            Powercode doesn't use RADIUS so I'd probably have to set that up on 
the side or something.

            Like I said I want to make this as automagic as possible and I'm 
wondering if anyone has already gone thru this so I don't have to reinvent the 
wheel.

            Powercode didn't have any ideas of how to accomplish this so maybe 
I'm blazing a trail on the cutting edge :-/  

            -Sean 

            On Thursday, August 18, 2016, George Skorup 
<javascript:_e(%7B%7D,'cvml','[email protected]');> wrote:

              I assume you're doing bridge mode? Use RADIUS to assign the SM's 
management IP. Then DHCP + Op 82 is used for the customer equipment.

              We just do static management IP on the SMs. Playing with NAT + 
DMZ on the customer side. Traceroute and other ICMP responses don't work 
through NAT mode, even with DMZ. And L2TP tunnels. I forget what else I tested 
on my SM at home. So far I'm not too thrilled with it.


              On 8/18/2016 10:08 PM, Sean Heskett wrote:

                Hummmm that's the conclusion we were coming to also. 

                I'm trying to find a way to make it all automagic but that 
seems not possible :-/

                -Sean


                On Thursday, August 18, 2016, Joe Novak <[email protected]> 
wrote:

                  From how I understand it that is not possible unless you plan 
on managing via the public IP.  

                  Option 82, in its simplest form, just allows accounting via 
the SU mac address, along with what 'circuit' (AP) it came from. I think in 
your situation if you want to use powercode to hand out public addresses you 
will need a static management network for CPEs. 



                  On Thu, Aug 18, 2016 at 9:05 PM, Sean Heskett 
<[email protected]> wrote:

                    Thx joe, 

                    So if it sends the same 0a:00:3e MAC for the bridged 
device, how do you get the dhcp server to send the management IP to the SM 
since that would be the same MAC?? 

                    -Sean 

                    On Thursday, August 18, 2016, Joe Novak <[email protected]> 
wrote:

                      Sean, 

                      No problem!

                      Cambium 450/EPMP behave the same way I am pretty sure 
without looking at my notes. This post describes it perfectly and also has a 
raw dump of the dhcp request: 
http://community.cambiumnetworks.com/t5/PMP-450/DHCP-Opt-82/td-p/39636

                      OPTION: 82 ( 29) Relay Agent Information
                      Circuit-ID 0a:00:3e:XX:XX:XX          #AP MAC
                      Remote-ID 0a:00:3e:YY:YY:YY          #SU Wireless MAC

                      That means that even if the client is in bridge mode the 
only mac address you need to track is the subscriber unit. I do not know any 
powercode specific stuff but I am looking at implementing with DHCP ISC. 


                      On Thu, Aug 18, 2016 at 8:36 PM, Sean Heskett 
<[email protected]> wrote:

                        Hey joe, 

                        Yeah we are mocking it up in our lab right now.  Mainly 
need to know what MAC gets sent for all the different interfaces - management, 
NAT enabled, bridged etc.

                        Powercode will only let you add one IP and MAC per 
device.  Since we are in the process of importing all our data for the 
migration to PC I'd like to set it all up now to be ready for option 82 in the 
future ;)

                        Joe, do you mind if our network engineer Elijah 
contacts you off list??

                        Thanks,

                        Sean 

                        On Thursday, August 18, 2016, Joe Novak 
<[email protected]> wrote:

                          I plan on implementing it with cambium both 450/epmp. 
Any specific questions? I learned a lot by taking a setting up a dhcp server 
with whatever verbose logging turned on and watching the requests.


                          On Aug 18, 2016 8:13 PM, "Josh Luthman" 
<[email protected]> wrote:

                            I'm almost certain someone does... But I'm not 100%

                            Josh Luthman
                            Office: 937-552-2340
                            Direct: 937-552-2343
                            1100 Wayne St
                            Suite 1337
                            Troy, OH 45373


                            On Aug 18, 2016 8:51 PM, "Sean Heskett" 
<[email protected]> wrote:

                              Powercode said they had never done it and didn't 
know anyone who had. (I was kinda surprised at that response) 

                              Figured I'd check to see if y'all had used it.  

                              -Sean


                              On Thursday, August 18, 2016, Josh Luthman 
<[email protected]> wrote:

                                Have you contacted Powercode about this or no?  
I figure they'd know, their wisp is Canopy.

                                Josh Luthman
                                Office: 937-552-2340
                                Direct: 937-552-2343
                                1100 Wayne St
                                Suite 1337
                                Troy, OH 45373


                                On Aug 18, 2016 8:35 PM, "Sean Heskett" 
<[email protected]> wrote:

                                We are in the process of migrating to 
powercode...it's not an easy task but I think it will be well worth it.  Lots 
of details to figure out lol. 

                                -Sean 

                                On Thursday, August 18, 2016, Tushar Patel 
<[email protected]> wrote:

                                You moved to powercode!!!

                                Tushar


                                > On Aug 18, 2016, at 6:16 PM, Sean Heskett 
<[email protected]> wrote:
                                >
                                > Hey gang,
                                >
                                > Any experts out there have experience with 
DHCP option 82 + Canopy + Powercode?  If so can I pick your brain???
                                >
                                > Thanks,
                                >
                                > Sean
                                >
                                >















-- 
Simon Westlake
Skype: Simon_Sonar
Email: [email protected]
Phone: (702) 447-1247
---------------------------
Sonar Software Inc
The next generation of ISP billing and OSS
https://sonar.software

Reply via email to