At 01:42 PM 11/9/00, NP-BASS LEON wrote:
>HOW????????????
>I would really like to know this one.....
>If I heard it correct Brian mentioned that he had a dumb MAU, so that MAU
>looks at that entire box as being one network segment, so how do you place
>two router interfaces with two different IP or IPX addresses on the same
>segment??????????????? IP will detect the conflict and IPX will beacon.
IPX can't beacon!!! &;-) I don't know how we managed to move up to the
network layer anyway. The question was "Can you configure multiple rings on
a single MAU?"
The answer is no. A MAU is a physical-layer relay. It's like an Ethernet
hub. Two rings requires at least a bridge or switch.
To be honest, I don't know what would actually happen if you plugged two
2500s into the same MAU and assigned two different ring numbers. I can't
think of anything in the Token Ring protocols that addresses this problem.
But I do know that it would be illogical, illegal, and downright ugly, kind
of like what's going on in Florida. &;-)
Priscilla
>-----Original Message-----
>From: Hennen, David [mailto:[EMAIL PROTECTED]]
>Sent: Thursday, November 09, 2000 1:03 PM
>To: 'Brian'; [EMAIL PROTECTED]
>Subject: RE: token ring question
>
>
>yes you can, as far as having two IP or IPX ranges running on a single mau.
>You can't mix ring speeds however.
>
>daveh
>
>-----Original Message-----
>From: Brian [mailto:[EMAIL PROTECTED]]
>Sent: Thursday, November 09, 2000 9:35 AM
>To: [EMAIL PROTECTED]
>Subject: token ring question
>
>
>
>
>Can you configure multiple rings on a single MAU? I mean If I plug 2
>2502's into a MAU can I set different rings for them, or do you really
>need two MAU's to do multi-ring/bridging scenerios?
>
>Brian
>
>
>
>-----------------------------------------------
>Brian Feeny, CCNP, CCDP [EMAIL PROTECTED]
>Network Administrator
>ShreveNet Inc. (ASN 11881)
>
>_________________________________
________________________
Priscilla Oppenheimer
http://www.priscilla.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]