have you used
bandwidth 64
statement?
Also in bandwidth statment, it is in kilobits instead of bits.
Let me know how it works.
Edward
-----Original Message-----
From: Neil Schneider [mailto:[EMAIL PROTECTED]]
Sent: Monday, June 11, 2001 5:48 PM
To: [EMAIL PROTECTED]
Subject: Re: URGENT !!!!!!!!!!!!!!!!!!!!! [7:8061]
Are you using the correct crossover cables?
Neil
""Ravi Varma"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi Guys
>
> We have 10 3640 Routers at our place
> the probelm i am facing is that i have to connec all these ten routers
back
> to
> back each router have 2 FE and one T1 (dsu/csu)
>
> When i tried to connect then back to back through the serial line
> using show int
>
> Serial 0/0 down and line protocol DOWn
>
> i had assigned Ip address
> assigned the clock rate 64000
> no shut
> and default encapsultaion (hdlc)
>
> and other i had gone through the same procedure but not assigned the
clock
> rate
>
> can u please help me on that it i have to get it up by evening
>
> Thanking you guys in advance
>
> Regards,
>
> Ravi Varma
*****************************************************************
DISCLAIMER: The information contained in this e-mail may be confidential
and is intended solely for the use of the named addressee. Access, copying
or re-use of the e-mail or any information contained therein by any other
person is not authorized. If you are not the intended recipient please
notify us immediately by returning the e-mail to the originator.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8066&t=8061
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
