I'll be happy to send you my hourly rate, and any travel/hotel stay is on
you. ;-)
(In other words, please don't abuse the "free tech support" vibe this place
gives off, mmmkay? :-)
----- Original Message -----
From: Ravi Varma
To: [EMAIL PROTECTED]
Sent: Monday, June 11, 2001 5:30 PM
Subject: URGENT !!!!!!!!!!!!!!!!!!!!! [7:8061]
Hi Guys
We have 10 3640 Routers at our place
the probelm i am facing is that i have to connec all these ten routers back
to
back each router have 2 FE and one T1 (dsu/csu)
When i tried to connect then back to back through the serial line
using show int
Serial 0/0 down and line protocol DOWn
i had assigned Ip address
assigned the clock rate 64000
no shut
and default encapsultaion (hdlc)
and other i had gone through the same procedure but not assigned the clock
rate
can u please help me on that it i have to get it up by evening
Thanking you guys in advance
Regards,
Ravi Varma
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8068&t=8061
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]