Connect all the routers together? Well if the serials are all going to
remote sites, connect the ethers to a switch/lan segment..
Brian "Sonic" Whalen
Success = Preparation + Opportunity
On Mon, 11 Jun 2001, andyh wrote:
> Hth? well, not really
>
> what, exactly, is a bandwidth statement going to achieve?? would you
enable
> MultiLink-PPP by adding "bandwidth 128000" to a BRI interface? - well
> probably in your case
>
> Oh yeh, and use "show controllers" for determining DCE/DTE
>
> do we really have to put up with yet another "how do I connect routers
> back-to-back" question.
>
> I despair of this list sometimes
>
> A
>
> Ole Drews Jensen wrote on Monday June 11 at 2001 11:15 PM
> > Also remember only to add the clockrate and bandwidth commands on the
> router
> > interfaces acting as DCE ports.
> >
> > When you do a show int, you can see if it's acting like DCE or DTE.
> >
> > Hth,
> >
> > Ole
> >Neil Schneider wrote on Monday, June 11 at 2001 4:48 PM
> > Are you using the correct crossover cables?
> >
> > Neil
> >
> > ""Ravi Varma"" wrote in message
> > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > Hi Guys
> > >
> > > We have 10 3640 Routers at our place
> > > the probelm i am facing is that i have to connec all these ten routers
> > back
> > > to
> > > back each router have 2 FE and one T1 (dsu/csu)
> > >
> > > When i tried to connect then back to back through the serial line
> > > using show int
> > >
> > > Serial 0/0 down and line protocol DOWn
> > >
> > > i had assigned Ip address
> > > assigned the clock rate 64000
> > > no shut
> > > and default encapsultaion (hdlc)
> > >
> > > and other i had gone through the same procedure but not assigned the
> > clock
> > > rate
> > >
> > > can u please help me on that it i have to get it up by evening
> > >
> > > Thanking you guys in advance
> > >
> > > Regards,
> > >
> > > Ravi Varma
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8077&t=8061
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
