I use the spinnaker twings. The blocks at the end are of the opening variety, so all I have to do is open them, snap them around the jib sheet and tune accordingly – outside the lifelines. I open the gate to run the sheet back aboard. On a 30-1, it really helps – wide boat.
Gary From: CnC-List <cnc-list-boun...@cnc-list.com> On Behalf Of Wade Glew via CnC-List Sent: Thursday, August 22, 2019 12:24 PM To: cnc-list@cnc-list.com Cc: Wade Glew <wadeg...@gmail.com> Subject: Re: Stus-List Barber haulers and whisker poles Got it. Makes sense as I visualize the scene. Thanks Wade On Wed, Aug 21, 2019, 20:34 Jim Watts via CnC-List, <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > wrote: Yes. The geometry doesn't work unless the sheet is led underneath the lifelines too. Easier to use a second sheet led through a block on the toerail. Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC On Wed, 21 Aug 2019 at 15:43, Wade Glew via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > wrote: good pic John; thanks. Is there a reason the twing line can't be attached outside the lifeline? Wade Oh Boy, C&C 33 MK II On Wed, Aug 21, 2019 at 11:09 AM Jim Watts via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > wrote: I use a simple twing setup...easy to attach, easy to trim, cheap. Up to the point where you need to rig a second sheet outboard of the lifelines, anyhow. https://i.imgur.com/EwjDofL.jpg Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC On Wed, 21 Aug 2019 at 09:02, Matthew L. Wolford via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > wrote: John: Yes, leave the jib sheet attached. Also, if you don’t like the position you get attaching the barber hauler line to the clew, you can also attach it to the jib sheet itself to deflect it. From: John Conklin via CnC-List <mailto:cnc-list@cnc-list.com> Sent: Wednesday, August 21, 2019 11:30 AM To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> Cc: John Conklin <mailto:jconk...@hotmail.com> Subject: Re: Stus-List Barber haulers and whisker poles All makes sense Based on replies Plan is to attach snatch block to toe rail mast area have the sheet run to and tied off at my extra winch on one end thru block and clipped off to upper lifeline tensioned to not flip around When reaching will attach this second line to clew (leaving jib sheet attached??) and this should move clew outward the open the slot ! Let try it !! Thanks all! John Conklin S/V Halcyon S/V Heartbeat www.flirtingwithfire.com <http://www.flirtingwithfire.com> _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
