good pic John; thanks. Is there a reason the twing line can't be attached outside the lifeline? Wade Oh Boy, C&C 33 MK II
On Wed, Aug 21, 2019 at 11:09 AM Jim Watts via CnC-List < cnc-list@cnc-list.com> wrote: > I use a simple twing setup...easy to attach, easy to trim, cheap. Up to > the point where you need to rig a second sheet outboard of the lifelines, > anyhow. > https://i.imgur.com/EwjDofL.jpg > > Jim Watts > Paradigm Shift > C&C 35 Mk III > Victoria, BC > > > On Wed, 21 Aug 2019 at 09:02, Matthew L. Wolford via CnC-List < > cnc-list@cnc-list.com> wrote: > >> John: >> >> Yes, leave the jib sheet attached. Also, if you don’t like the >> position you get attaching the barber hauler line to the clew, you can also >> attach it to the jib sheet itself to deflect it. >> >> >> >> *From:* John Conklin via CnC-List <cnc-list@cnc-list.com> >> *Sent:* Wednesday, August 21, 2019 11:30 AM >> *To:* cnc-list@cnc-list.com >> *Cc:* John Conklin <jconk...@hotmail.com> >> *Subject:* Re: Stus-List Barber haulers and whisker poles >> >> All makes sense >> Based on replies Plan is to attach snatch block to toe rail mast area >> have the sheet run to and tied off at my extra winch on one end thru block >> and clipped off to upper lifeline tensioned to not flip around >> When reaching will attach this second line to clew (leaving jib sheet >> attached??) and this should move clew outward the open the slot ! >> Let try it !! >> >> Thanks all! >> >> John Conklin >> S/V Halcyon >> S/V Heartbeat >> www.flirtingwithfire.com >> >> >> >> _______________________________________________ >> >> Thanks everyone for supporting this list with your contributions. Each >> and every one is greatly appreciated. If you want to support the list - >> use PayPal to send contribution -- https://www.paypal.me/stumurray >> >> _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
