Yes. The geometry doesn't work unless the sheet is led underneath the lifelines too. Easier to use a second sheet led through a block on the toerail.
Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC On Wed, 21 Aug 2019 at 15:43, Wade Glew via CnC-List <cnc-list@cnc-list.com> wrote: > good pic John; thanks. Is there a reason the twing line can't be > attached outside the lifeline? > Wade > Oh Boy, C&C 33 MK II > > On Wed, Aug 21, 2019 at 11:09 AM Jim Watts via CnC-List < > cnc-list@cnc-list.com> wrote: > >> I use a simple twing setup...easy to attach, easy to trim, cheap. Up to >> the point where you need to rig a second sheet outboard of the lifelines, >> anyhow. >> https://i.imgur.com/EwjDofL.jpg >> >> Jim Watts >> Paradigm Shift >> C&C 35 Mk III >> Victoria, BC >> >> >> On Wed, 21 Aug 2019 at 09:02, Matthew L. Wolford via CnC-List < >> cnc-list@cnc-list.com> wrote: >> >>> John: >>> >>> Yes, leave the jib sheet attached. Also, if you don’t like the >>> position you get attaching the barber hauler line to the clew, you can also >>> attach it to the jib sheet itself to deflect it. >>> >>> >>> >>> *From:* John Conklin via CnC-List <cnc-list@cnc-list.com> >>> *Sent:* Wednesday, August 21, 2019 11:30 AM >>> *To:* cnc-list@cnc-list.com >>> *Cc:* John Conklin <jconk...@hotmail.com> >>> *Subject:* Re: Stus-List Barber haulers and whisker poles >>> >>> All makes sense >>> Based on replies Plan is to attach snatch block to toe rail mast area >>> have the sheet run to and tied off at my extra winch on one end thru block >>> and clipped off to upper lifeline tensioned to not flip around >>> When reaching will attach this second line to clew (leaving jib sheet >>> attached??) and this should move clew outward the open the slot ! >>> Let try it !! >>> >>> Thanks all! >>> >>> John Conklin >>> S/V Halcyon >>> S/V Heartbeat >>> www.flirtingwithfire.com >>> >>> >>> >>> _______________________________________________ >>> >>> Thanks everyone for supporting this list with your contributions. Each >>> and every one is greatly appreciated. If you want to support the list - >>> use PayPal to send contribution -- https://www.paypal.me/stumurray >>> >>> _______________________________________________ >> >> Thanks everyone for supporting this list with your contributions. Each >> and every one is greatly appreciated. If you want to support the list - >> use PayPal to send contribution -- https://www.paypal.me/stumurray >> >> _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
