On Sun, 16 Dec 2012, Anders Wallin wrote: > Date: Sun, 16 Dec 2012 22:09:02 +0200 > From: Anders Wallin <[email protected]> > Reply-To: EMC developers <[email protected]> > To: EMC developers <[email protected]> > Subject: Re: [Emc-developers] trying out Mesanet PCI cards with userland > thread builds > >>>> with the hostmot2-firmware-3x20-1 deb package installed from >>>>> www.linuxcnc.org and trying 3x20-small.ini I now get >>>>> http://pastebin.ca/2293883 >>>>> >> >> >> Also is it possible you have the 6I68 jumpered to auto load a EEPROM >> config? >> This might cause that error >> > > On the 6i68, I have now moved jumper W7 to the Down-position. Is that the > correct position for use with linuxcnc/hostmot2?
Yes W7 down, W8 up (and power cycle) Is this normal LinuxCNC or the Xenomai/ userland PCI code? > > However I see the same output as before (below). > > Anders > > Starting LinuxCNC... > hm2: loading Mesa HostMot2 driver version 0.15 > hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 > Device Node Path: /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:04.0 > check_device_id > PCI_ID: 10B5:9056 10B5:3427 > RTAPI_PCI: DeviceID: 10B5 9056 10B5 3427 > RTAPI_PCI: Calling driver probe function > RTAPI_PCI: Enabling Device 0000:02:04.0 > Resource 0: 0xdfa10000 0xdfa101ff 00040200 > Resource 1: 0x2000 0x20ff 00040101 > Resource 2: 0x2400 0x24ff 00040101 > Resource 3: 0xdfa00000 0xdfa0ffff 00040200 > Resource 4: (nil) (nil) 00000000 > Resource 5: (nil) (nil) 00000000 > hm2_pci: discovered 3x20-1.0M at 0000:02:04.0 > RTAPI_PCI: Map BAR 3 > hm2_3x20.0: /DONE status bit indicates busy at start of programming > hm2/hm2_3x20.0: failed to reset fpga, aborting hm2_register > hm2_3x20.0: board fails HM2 registration > ------------------------------------------------------------------------------ > LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial > Remotely access PCs and mobile devices and provide instant support > Improve your efficiency, and focus on delivering more value-add services > Discover what IT Professionals Know. Rescue delivers > http://p.sf.net/sfu/logmein_12329d2d > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial Remotely access PCs and mobile devices and provide instant support Improve your efficiency, and focus on delivering more value-add services Discover what IT Professionals Know. Rescue delivers http://p.sf.net/sfu/logmein_12329d2d _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
