On Wed, 2011-09-14 at 08:56 -0700, doug metzler wrote: ... snip > Andy, is the mesa 5i25 compatible with the CNC4PC pendant? and how > hard is the mesa to install/configure? Looking at the docs I fear it > might be another rabbit hole - unless it has a wizard :-)
Doug, are you using the pendant with the CNC4PC C22 interface board? EMC2 can use the CNC4PC pendants, but not directly connected to the parallel port since the pendant connector pin-out does not match the parallel port pin functions. The C22 or a custom connection will be needed to connect the pendant pins to the proper parallel port pins. The e-stop and/or enable functions may be an issue too. -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ BlackBerry® DevCon Americas, Oct. 18-20, San Francisco, CA Learn about the latest advances in developing for the BlackBerry® mobile platform with sessions, labs & more. See new tools and technologies. Register for BlackBerry® DevCon today! http://p.sf.net/sfu/rim-devcon-copy1 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
