Yes, I do have the C22 interface board. Do any of you have this pendant running and if so would you be willing to send me your config files and the type of parallel card you're using?
Thanks, DougM On Wed, Sep 14, 2011 at 11:00 AM, Kirk Wallace <[email protected]> wrote: > On Wed, 2011-09-14 at 08:56 -0700, doug metzler wrote: > ... snip >> Andy, is the mesa 5i25 compatible with the CNC4PC pendant? and how >> hard is the mesa to install/configure? Looking at the docs I fear it >> might be another rabbit hole - unless it has a wizard :-) > > Doug, are you using the pendant with the CNC4PC C22 interface board? > EMC2 can use the CNC4PC pendants, but not directly connected to the > parallel port since the pendant connector pin-out does not match the > parallel port pin functions. The C22 or a custom connection will be > needed to connect the pendant pins to the proper parallel port pins. > > The e-stop and/or enable functions may be an issue too. > > -- > Kirk Wallace > http://www.wallacecompany.com/machine_shop/ > http://www.wallacecompany.com/E45/index.html > California, USA > > > ------------------------------------------------------------------------------ > BlackBerry® DevCon Americas, Oct. 18-20, San Francisco, CA > Learn about the latest advances in developing for the > BlackBerry® mobile platform with sessions, labs & more. > See new tools and technologies. Register for BlackBerry® DevCon today! > http://p.sf.net/sfu/rim-devcon-copy1 > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ BlackBerry® DevCon Americas, Oct. 18-20, San Francisco, CA Learn about the latest advances in developing for the BlackBerry® mobile platform with sessions, labs & more. See new tools and technologies. Register for BlackBerry® DevCon today! http://p.sf.net/sfu/rim-devcon-copy1 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
