Am 15.01.2012 21:50, schrieb gene heskett:
> On Sunday, January 15, 2012 03:38:17 PM gene heskett did opine:
> I just found 2 bugs in visolate.jar
>
> 1. The F speeds output I had entered as 4.0ipm because my spindles max rpms
> is 2500. But it is multiplied by 60 in the gcode to F240 etc, so feed
> rates will need to be entered in ips, not ipm.
>
> 2. It can also do outline milling, possibly doing what pcb-gcode would do,
> but once asked to, it cannot be changed back to voroni without shutting it
> down and restarting. Changing the checkmark doesn't change it back... ;-(
> Neither of these are showstoppers.
>
> Now, what do most of you folks use for converting an eagle's 'excellon'
> drill file to gcode? This might be the next stumbling block here.
You could report your findings on the visolate website as bugs.
And i only use pcb-gcode to generate emc gcode for milling and drilling
out of brd files. So why bother with visolate for this? :)
Ciao,
Rainer
------------------------------------------------------------------------------
RSA(R) Conference 2012
Mar 27 - Feb 2
Save $400 by Jan. 27
Register now!
http://p.sf.net/sfu/rsa-sfdev2dev2
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
